Nonlinear analysis of cable structures using the dynamic relaxation method

Abstract

The analysis of cable structures is one of the most challenging problems for civil and mechanical engineers. Because they have highly nonlinear behavior, it is difficult to find solutions to these problems. Thus far, different assumptions and methods have been proposed to solve such structures. The dynamic relaxation method (DRM) is an explicit procedure for analyzing these types of structures. To utilize this scheme, investigators have suggested various stiffness matrices for a cable element. In this study, the efficiency and suitability of six well-known proposed matrices are assessed using the DRM. To achieve this goal, 16 numerical examples and two criteria, namely, the number of iterations and the analysis time, are employed. Based on a comprehensive comparison, the methods are ranked according to the two criteria. The numerical findings clearly reveal the best techniques. Moreover, a variety of benchmark problems are suggested by the authors for future studies of cable structures.

Keywords

nonlinear analysis / cable structure / stiffness matrix / dynamic relaxation method

References

[1] Underwood P. Computational Method for Transient Analysis. North Holland, 1983

[2] Day A S. An Introduction to Dynamic Relaxation. The Engineer, 1965

[3] Bunce J W. A note on the estimation of critical damping in dynamic relaxation. International Journal for Numerical Methods in Engineering, 1972, 4(2): 301–303

[4] Cassell A C, Hobbs R E. Numerical stability of dynamic relaxation analysis of non-linear structures. International Journal for Numerical Methods in Engineering, 1976, 10(6): 1407–1410

[5] Shizhong Q. An adaptive dynamic relaxation method for nonlinear problems. Computers & Structures, 1988, 30(4): 855–859

[6] Zhang L G, Yu T X. Modified adaptive dynamic relaxation method and its application to elastic-plastic bending and wrinkling of circular plates. Computers & Structures, 1989, 33(2): 609–614

[7] Zhang L C, Kadkhodayan M, Mai Y W. Development of the MADR method. Computers & Structures, 1994, 52(1): 1–8

[8] Rezaiee-Pajand M.Nonlinear analysis of truss structures using dynamic relaxation. International Journal of Engineering, 2006, 19: 11–22

[9] Kadkhodayan M, Alamatian J, Turvey G J. A new fictitious time for the dynamic relaxation (DXDR) method. International Journal for Numerical Methods in Engineering, 2008, 74(6): 996–1018

[10] Rezaiee-Pajand M, Alamatian J. The dynamic relaxation method using new formulation for fictitious mass and damping. Structural Engineering and Mechanics, 2010, 34(1): 109–133

[11] Rezaiee-Pajand M, Sarafrazi S R. Nonlinear structural analysis using dynamic relaxation method with improved convergence rate. International Journal of Computational Methods, 2010, 7(4): 627–654

[12] Rezaiee-Pajand M, Sarafrazi S R. Nonlinear dynamic structural analysis using dynamic relaxation with zero damping. Computers & Structures, 2011, 89(13–14): 1274–1285

[13] Rezaiee-Pajand M, Sarafrazi S R, Rezaiee H. Efficiency of dynamic relaxation methods in nonlinear analysis of truss and frame structures. Computers & Structures, 2012, 112–113: 295–310

[14] Alamatian J. Displacement-based methods for calculating the buckling load and tracing the post-buckling regions with Dynamic Relaxation method. Computers & Structures, 2013, 114–115: 84–97

[15] Rezaiee-Pajand M, Rezaee H. Fictitious time step for the kinetic dynamic relaxation method. Mechanics of Advanced Materials and Structures, 2014, 21(8): 631–644

[16] Rezaiee-Pajand M, Estiri H. Computing the structural buckling limit load by using dynamic relaxation method. International Journal of Non-linear Mechanics, 2016, 81: 245–260

[17] Rezaiee-Pajand M, Estiri H. Finding equilibrium paths by minimizing external work in dynamic relaxation method. Applied Mathematical Modelling, 2016, 40(23–24): 10300–10322

[18] Rezaiee-Pajand M, Estiri H. Mixing dynamic relaxation method with load factor and displacement increments. Computers & Structures, 2016, 168: 78–91

[19] Rezaiee-Pajand M, Estiri H. A comparison of large deflection analysis of bending plates by dynamic relaxation. Periodica Polytechnica. Civil Engineering, 2016, 60(4): 619–645

[20] Rezaiee-Pajand M, Estiri H. Comparative analysis of three-dimensional frames by dynamic relaxation methods. Mechanics of Advanced Materials and Structures, 2018, 25(6): 451–466

[21] Rezaiee-Pajand M, Alamatian J, Rezaee H. The state of the art in Dynamic Relaxation methods for structural mechanics Part 1: Formulations. Iranian Journal of Numerical Analysis and Optimization, 2017, 7(2): 65–86

[22] Rezaiee-Pajand M, Alamatian J, Rezaee H. The state of the art in Dynamic Relaxation methods for structural mechanics Part 2: Applications. Iranian Journal of Numerical Analysis and Optimization, 2017, 7(2): 87–114

[23] Labbafi S F, Sarafrazi S R, Kang T H K. Comparison of viscous and kinetic dynamic relaxation methods in form-finding of membrane structures. Advances in Computational Design , 2017, 2(1): 71–87

[24] Rezaiee-Pajand M, Mohammadi-Khatami M. A fast and accurate dynamic relaxation scheme. Frontiers of Structural and Civil Engineering, 2019, 13(1): 176–189

[25] Rezaiee-Pajand M, Estiri H, Mohammadi-Khatami M.Creating better dynamic relaxation methods. Engineering Computations, 2019, 36(5): 1483–1521

[26] Ozdemir H. A finite element approach for cable problems. International Journal of Solids and Structures, 1979, 15(5): 427–437

[27] Pevrot A H, Goulois A M. Analysis of cable structures. Computers & Structures, 1979, 10(5): 805–813

[28] Monforton G R, El-Hakim N M. Analysis of truss-cable structures. Computers & Structures, 1980, 11(4): 327–335

[29] Jayaraman H B, Knudson W C. A curved element for the analysis of cable structures. Computers & Structures, 1981, 14(3–4): 325–333

[30] Lewis W J, Jones M S, Rushton K R. Dynamic relaxation analysis of the non-linear static response of pretensioned cable roofs. Computers & Structures, 1984, 18(6): 989–997

[31] Kmet S, Kokorudova Z. Nonlinear analytical solution for cable truss. Journal of Engineering Mechanics, 2006, 132(1): 119–123

[32] Deng H, Jiang Q F, Kwan A S K. Shape finding of incomplete cable-strut assemblies containing slack and prestressed elements. Computers & Structures, 2005, 83(21–22): 1767–1779

[33] Andreu A, Gil L, Roca P. A new deformable catenary element for the analysis of cable net structures. Computers & Structures, 2006, 84(29–30): 1882–1890

[34] Yang Y B, Tsay J Y. Geometric nonlinear analysis of cable structures with a two-node cable element by generalized displacement control method. International Journal of Structural Stability and Dynamics, 2007, 07(04): 571–588

[35] Chen Z H, Wu Y J, Yin Y, Shan C. Formulation and application of multi-node sliding cable element for the analysis of Suspen-Dome structures. Finite Elements in Analysis and Design, 2010, 46(9): 743–750

[36] Thai H T, Kim S E. Nonlinear static and dynamic analysis of cable structures. Finite Elements in Analysis and Design, 2011, 47(3): 237–246

[37] Vu T V, Lee H E, Bui Q T. Nonlinear analysis of cable-supported structures with a spatial catenary cable element. Structural Engineering and Mechanics, 2012, 43(5): 583–605

[38] Huttner M, Maca J, Fajman P. Numerical analysis of cable structures. In: Proceedings of the Eleventh International Conference: Computational Structures Technology. Stirlingshire: Civil-Comp Press, 2012

[39] Ahmadizadeh M. Three-dimensional geometrically nonlinear analysis of slack cable structures. Computers & Structures, 2013, 128: 160–169

[40] Temur R, Bekdaş G, Toklu Y C. Analysis of cable structures through total potential optimization using meta-heuristic algorithms. In: ACE2014, the 11th International Congress on Advances in Civil Engineering. 2014, 21–25

[41] Hashemi S K, Bradford M A, Valipour H R. Dynamic response of cable-stayed bridge under blast load. Engineering Structures, 2016, 127: 719–736

[42] Gale S, Lewis W J. Patterning of tensile fabric structures with a discrete element model using dynamic relaxation. Computers & Structures, 2016, 169: 112–121

[43] Anitescu C, Atroshchenko E, Alajlan N, Rabczuk T. Artificial neural network methods for the solution of second order boundary value problems. Computers, Materials and Continua, 2019, 59(1): 345–359

[44] Guo H, Zhuang X, Rabczuk T. A deep collocation method for the bending analysis of Kirchhoff plate. Computers, Materials and Continua, 2019, 59(2): 433–456

[45] Rabczuk T, Ren H, Zhuang X. A nonlocal operator method for partial differential equations with application to electromagnetic waveguide problem. Computers, Materials and Continua, 2019, 59(1): 31–55

[46] Torkamani M A M, Shieh J H. Higher-order stiffness matrices in nonlinear finite element analysis of plane truss structures. Engineering Structures, 2011, 33(12): 3516–3526

[47] Hüttner M, Máca J, Fajman P. The efficiency of dynamic relaxation methods in static analysis of cable structures. Advances in Engineering Software, 2015, 89: 28–35

[48] Rezaiee-Pajand M, Naserian R. Using more accurate strain for three-dimensional truss analysis. Asian Journal of Civil Engineering, 2016, 17(1): 107–126

[49] Lewis W J. The efficiency of numerical methods for the analysis of prestressed nets and pin-jointed frame structures. Computers & Structures, 1989, 33(3): 791–800

RIGHTS & PERMISSIONS

Higher Education Press