Optimizing the compressive strength of concrete containing micro-silica, nano-silica, and polypropylene fibers using extreme vertices mixture design

Abstract

Many studies have evaluated the effects of additives such as nano-silica (NS), micro-silica (MS) and polymer fibers on optimizing the mechanical properties of concrete, such as compressive strength. Nowadays, with progress in cement industry provides, it has become possible to produce cement type I with strength classes of 32.5, 42.5, and 52.5 MPa. On the one hand, the microstructure of cement has changed, and modified by NS, MS, and polymers; therefore it is very important to determine the optimal percentage of each additives for those CSCs. In this study, 12 mix designs containing different percentages of MS, NS, and polymer fibers in three cement strength classes(CSCs) (32.5, 42.5, and 52.5 MPa) were designed and constructed based on the mixture method. Results indicated the sensitivity of each CSCs can be different on the NS or MS in compressive strength of concrete. Consequently, strength classes have a significant effect on the amount of MS and NS in mix design of concrete. While, polymer fibers don’t have significant effect in compressive strength considering CSCs.

Keywords

mixture method / compressive strength / nano-silica / micro-silica / polypropylene fibers

References

[1] Farnam Y, Mohammadi S, Shekarchi M. Experimental and numerical investigations of low velocity impact behavior of high-performance fiber-reinforced cement based composite. International Journal of Impact Engineering, 2010, 37(2): 220–229

[2] Park J J, Kang S T, Koh K T, Kim S W. Influence of the ingredients on the compressive strength of UHPC as a fundamental study to optimize the mixing proportion. In: Second International Symposium on Ultra High Performance Concrete. Germany Kassel, 2008

[3] Prasad B R, Eskandari H, Reddy B V. Prediction of compressive strength of SCC and HPC with high volume fly ash using ANN. Construction & Building Materials, 2009, 23(1): 117–128

[4] Eskandari H, Nik M G, Eidi M M. Prediction of mortar compressive strengths for different cement grades in the vicinity of sodium chloride using ANN. Procedia Engineering, 2016, 150: 2185–2192

[5] Eskandari H, Tayyebinia M. Effect of 32.5 and 42.5 cement grades on ANN prediction of fibrocement compressive strength. Procedia Engineering, 2016, 150: 2193–2201

[6] Eskandari H. Designing, proposing and comparing the methods predicting the compressive strength of the ferro cement mortar. Concrete Research Letters, 2015, 6(1): 1–10

[7] Mahsa Z S, Hamid E N. Optimizing compressive strength of micro-and nano-silica concrete by statistical method. Civil Engineering Journal, 2017, 3(11): 1084–1096

[8] En B. 197-1-2000Cement: Composition, Specifications and Conformity Criteria for Common Cements. London: British Standards Institution, 2000

[9] Hirschi T, Knawber H, Lanz M, Schlumpf J, Schrabback J, Spirig C, Waeber U. Sika Concrete Handbook. Switzerland: Sika, 2005

[10] Bureau of Indian Standards. Indian Standard Plain and Reinforced Concrete-Code of Practice. 4th ed. New Delhi: Bureau of Indian Standards, 2000

[11] Hamid E N, Ramin K. ANN prediction of cement mortar compressive strength, influence of cement strength class. Construction & Building Materials, 2017, 138: 1–11

[12] Song P, Hwang S, Sheu B. Strength properties of nylon-and polypropylene-fiber-reinforced concretes. Cement and Concrete Research, 2005, 35(8): 1546–1550

[13] Aruntaş H Y, Cemalgil S, Şimşek O, Durmuş G, Erdal M. Effects of super plasticizer and curing conditions on properties of concrete with and without fiber. Materials Letters, 2008, 62(19): 3441–3443

[14] Banthia N, Gupta R. Influence of polypropylene fiber geometry on plastic shrinkage cracking in concrete. Cement and Concrete Research, 2006, 36(7): 1263–1267

[15] Ghavami K. Bamboo as reinforcement in structural concrete elements. Cement and Concrete Composites, 2005, 27(6): 637–649

[16] Yao W, Li J, Wu K. Mechanical properties of hybrid fiber-reinforced concrete at low fiber volume fraction. Cement and Concrete Research, 2003, 33(1): 27–30

[17] Farid H N, Mahdi N. The effect of forta-ferro and steel fibers on mechanical properties of high-strength concrete with and without silica fume and nano-silica. Construction & Building Materials, 2017, 137: 557–572

[18] Afroughsabet V, Ozbakkaloglu T. Mechanical and durability properties of high-strength concrete containing steel and polypropylene fibers. Construction & Building Materials, 2015, 94: 73–82

[19] Topçu I B, Canbaz M. Effect of different fibers on the mechanical properties of concrete containing fly ash. Construction & Building Materials, 2007, 21(7): 1486–1491

[20] Yew M K, Mahmud H B, Ang B C, Yew M C. Influence of different types of polypropylene fibre on the mechanical properties of high-strength oil palm shell lightweight concrete. Construction & Building Materials, 2015, 90: 36–43

[21] Farzadnia N, Abang Ali A A, Demirboga R. Characterization of high strength mortars with nano alumina at elevated temperatures. Cement and Concrete Research, 2013, 54: 43–54

[22] Farzadnia N, Abang Ali A A, Demirboga R, Anwar M P. Characterization of high strength mortars with nano Titania at elevated temperatures. Construction & Building Materials, 2013, 43: 469–479

[23] Farzadnia N, Abang Ali A A, Demirboga R, Anwar M P. Effect of halloysite nanoclay on mechanical properties, thermal behavior and microstructure of cement mortars. Cement and Concrete Research, 2013, 48: 97–104

[24] Jo B W, Kim C H, Tae G, Park J B. Characteristics of cement mortar with nano-SiO₂ particles. Construction & Building Materials, 2007, 21(6): 1351–1355

[25] Berra M, Carassiti F, Mangialardi T, Paolini A E, Sebastiani M. Effects of nanosilica addition on workability and compressive strength of Portland cement pastes. Construction & Building Materials, 2012, 35: 666–675

[26] Mohamed A M. Influence of nano materials on flexural behavior and compressive strength of concrete. HBRC Journal, 2016, 12(2): 212–225

[27] Scrivener K L, Kirkpatrick R J. Innovation in use and research on cementitious material. Cement and Concrete Research, 2008, 38(2): 128–136

[28] Li H, Xiao H, Yuan J, Ou J. Microstructure of cement mortar with nano-particles. Composites. Part B, Engineering, 2004, 35(2): 185–189

[29] Ji T. Preliminary study on the water permeability and microstructure of concrete incorporating nano-SiO₂. Cement and Concrete Research, 2005, 35(10): 1943–1947

[30] Hamdia K M, Silani M, Zhuang X, He P, Rabczuk T. Stochastic analysis of the fracture toughness of polymeric nanoparticle composites using polynomial chaos expansions. International Journal of Fracture, 2017, 206(2): 215–227

[31] Khudari Bek Y, Hamdia K M, Rabczuk T, Könke C. Micromechanical model for polymeric nano-composites material based on SBFEM. Composite Structures, 2018, 194: 516–526

[32] Qing Y, Zenan Z, Deyu K, Rongshen C. Influence of nano-SiO₂ addition on properties of hardened cement paste as compared with silica fume. Construction & Building Materials, 2007, 21(3): 539–545

[33] Lin K, Chang W C, Lin D F, Luo H L, Tsai M C. Effects of nano-SiO₂ and different ash particle sizes on sludge ash-cement mortar. Journal of Environmental Management, 2008, 88(4): 708–714

[34] Ltifi M, Guefrech A, Mounanga P, Khelidj A. Experimental study of the effect of addition of nano-silica on the behaviour of cement mortars. Procedia Engineering, 2011, 10: 900–905

[35] Liu X, Chen L, Liu A, Wang X. Effect of nano-CaCO₃ on properties of cement paste. Energy Procedia, 2012, 16: 991–996

[36] Sabdono P, Sustiawan F, Fadlillah D A. The effect of nano-cement content to the compressive strength of mortar. Procedia Engineering, 2014, 95: 386–395

[37] Li G. Properties of high-volume fly ash concrete incorporating nano-SiO₂. Cement and Concrete Research, 2004, 34(6): 1043–1049

[38] Collepardi M, Collepardi S, Skarp U, Troli R. Optimization of silica fume, fly ash and amorphous nano-silica in superplasticized high-performance concretes. In: 8th CANMET/ACI International Conference on Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, SP-221. Las Vegas, 2004

[39] Ammar M M. The effect of nano-silica on the performance of portland cement mortar. Thesis for the Master’s degree. 2012

[40] Ozyildirim C , Zegetosky C. Laboratory Investigation of Nanomaterials to Improve the Permeability and Strength of Concrete. No. VTRC 10-R18. 2010

[41] Mohamed A, Khaled A H. Effect of using different types of nano materials on mechanical properties of high strength concrete. Construction & Building Materials, 2015, 80: 116–124

[42] Monteiro P. Concrete: Microstructure, Properties, and Materials. McGraw-Hill Publishing, 2006

[43] Massoud M T, Abou-Zeid M N, Fahmy E H. Polypropylene fibers and silica fume concrete for bridge overlays. In: 82nd Annual Meeting of the Transportation Research Board. 2003

[44] Yen T, Hsu T H, Liu Y W, Chen S H. Influence of class F fly ash on the abrasion-erosion resistance of high-strength concrete. Construction & Building Materials, 2007, 21(2): 458–463

[45] Abdul Razak H, Wong H S. Strength estimation model for high-strength concrete incorporating metakaolin and silica fume. Cement and Concrete Research, 2005, 35(4): 688–695

[46] Domone P. Self-compacting concrete: An analysis of 11 years of case studies. Cement and Concrete Composites, 2006, 28(2): 197–208

[47] Barbhuiya S, Gbagbo J K, Russell M I, Basheer P A M. Properties of fly ash concrete modified with hydrated lime and silica fume. Construction & Building Materials, 2009, 23(10): 3233–3239

[48] Siddique R. Utilization of silica fume in concrete: review of hardened properties. Resources, Conservation and Recycling, 2011, 55(11): 923–932

[49] Nili M, Ehsani A, Shabani K. Influence of nano-SiO2 and micro-silica on concrete performance. In: Proceedings Second International Conference on Sustainable Construction Materials and Technologies, 2010

[50] Montgomery D C. Design and Analysis of Experiments. New York: John Wiley & Sons, 2001, 64–65

[51] Silva G F, Camargo F L, Ferreira A L. Application of response surface methodology for optimization of biodiesel production by transesterification of soybean oil with ethanol. Fuel Processing Technology, 2011, 92(3): 407–413

[52] Eskandari H, Korouzhdeh T. Cost optimization and sensitivity analysis of composite beams. Civil Engineering Journal, 2016, 2(2): 52–62

[53] Vu-Bac N, Duong T X, Lahmer T, Zhuang X, Sauer R A, Park H S, Rabczuk T. A NURBS-based inverse analysis for reconstruction of nonlinear deformations of thin shell structures. Computer Methods in Applied Mechanics and Engineering, 2018, 331: 427–455

[54] Eskandari H, Nic A M, Ghanei A. Effect of air entraining admixture on corrosion of reinforced concrete. Procedia Engineering, 2016, 150: 2178–2184

[55] Nkuzinna O C, Menkiti M C, Onukwuli O D, Mbah G O, Okolo B I, Egbujor M C, Government R M. Application of factorial design of experiment for optimization of inhibition effect of acid extract of gnetum africana on copper corrosion. Natural Resources, 2014, 5(7): 299–307

[56] Dias G H, Guedes C L B, Da Silva E T, Angilelli K G, Coppo R L, Borsato D. Application of the simplex-centroid design with process variable in the optimization of production conditions of B100 biodiesel from sunflower oil. Acta Scientiarum Technology, 2014, 36(3): 505–512

[57] Ghasemi H, Park H S, Rabczuk T. A level-set based IGA formulation for topology optimization of flexoelectric materials. Computer Methods in Applied Mechanics and Engineering, 2017, 313: 239–258

[58] Ghasemi H, Park H S, Rabczuk T. A multi-material level set-based topology optimization of flexoelectric composites. Computer Methods in Applied Mechanics and Engineering, 2018, 332: 47–62

[59] Cleland D, McCluskey A. An extreme vertices mixture design approach to the optimisation of 1, 2, 3-trichlorobenzene specific molecularly imprinted polymers. Organic & Biomolecular Chemistry, 2013, 11(28): 4672–4679

[60] Cornell J A. Experiments with mixtures: Designs, Models, and the Analysis of Mixture Data. John Wiley & Sons, 2011

[61] Ding J T, Yan P Y, Liu S L, Zhu J Q. Extreme vertices design of concrete with combined mineral admixtures. Cement and Concrete Research, 1999, 29(6): 957–960

[62] Lagergren E S, Snyder K A, Simon M J. Concrete Mixture Optimization Using Statistical Mixture Design Methods. In: Proceedings of the PCI/FHWA international symposium on high performance concrete, 1997

[63] Bouzalakos S, Dudeney A, Chan B. Formulating and optimising the compressive strength of controlled low-strength materials containing mine tailings by mixture design and response surface methods. Minerals Engineering, 2013, 53: 48–56

[64] Nili M, Afroughsabet V. The effects of silica fume and polypropylene fibers on the impact resistance and mechanical properties of concrete. Construction & Building Materials, 2010, 24(6): 927–933

[65] Li L, Huang Z H, Zhu J, Kwan A K H, Chen H Y. Synergistic effects of micro-silica and nano-silica on strength and microstructure of mortar. Construction & Building Materials, 2017, 140: 229–238

RIGHTS & PERMISSIONS

Higher Education Press and Springer-Verlag GmbH Germany, part of Springer Nature