Maximum entropy based finite element analysis of porous media

Abstract

The maximum entropy theory has been used in a wide variety of physical, mathematical and engineering applications in the past few years. However, its application in numerical methods, especially in developing new shape functions, has attracted much interest in recent years. These shape functions possess the potential for performing better than the conventional basis functions in problems with randomly generated coarse meshes. In this paper, the maximum entropy theory is adopted to spatially discretize the deformation variable of the governing coupled equations of porous media. This is in line with the well-known fact that higher-order shape functions can provide more stable solutions in porous problems. Some of the benchmark problems in deformable porous media are solved with the developed approach and the results are compared with available references.

Keywords

maximum entropy FEM / fully coupled multi-phase system / porous media

References

[1] Touma J, Vauclin M. Experimental and numerical analysis of two-phase infiltration in a partially saturated soil. Transport in Porous Media, 1986, 1(1): 27–55

[2] Faust C R, Guswa J H, Mercer J W. Simulation of three-dimensional flow of immiscible fluids within and below the unsaturated zone. Water Resources Research, 1989, 25(12): 2449–2464

[3] Ataie-Ashtiani B, Raeesi-Ardekani D. Comparison of numerical formulations for two-phase flow in porous media. Geotechnical and Geological Engineering, 2010, 28(4): 373–389

[4] Durlofsky L J. A triangle based mixed finite element—finite volume technique for modeling two phase flow through porous media. Journal of Computational Physics, 1993, 105(2): 252–266

[5] Forsyth P A, Wu Y, Pruess K. Robust numerical methods for saturated-unsaturated flow with dry initial conditions in heterogeneous media. Advances in Water Resources, 1995, 18(1): 25–38

[6] Jenny P, Lee S H, Tchelepi H A. Adaptive multiscale finite-volume method for multiphase flow and transport in porous media. Multiscale Modeling & Simulation, 2005, 3(1): 50–64

[7] Klieber W, Rivière B. Adaptive simulations of two-phase flow by discontinuous Galerkin methods. Computer Methods in Applied Mechanics and Engineering, 2006, 196(1‒3): 404–419

[8] Epshteyn Y, Rivière B. Fully implicit discontinuous finite element methods for two-phase flow. Applied Numerical Mathematics, 2007, 57(4): 383–401

[9] .Li X O, Zienkiewicz . Multiphase flow in deforming porous media and finite element solutions. Computers & Structures, 1992, 45(2): 211–227

[10] Rahman N A, Lewis R W. Finite element modelling of multiphase immiscible flow in deforming porous media for subsurface systems. Computers and Geotechnics, 1999, 24(1): 41–63

[11] Laloui L, Klubertanz G, Vulliet L. Solid–liquid–air coupling in multiphase porous media. International Journal for Numerical and Analytical Methods in Geomechanics, 2003, 27(3): 183–206

[12] Oettl G, Stark R, Hofstetter G. Numerical simulation of geotechnical problems based on a multi-phase finite element approach. Computers and Geotechnics, 2004, 31(8): 643–664

[13] Stelzer R, Hofstetter G. Adaptive finite element analysis of multi-phase problems in geotechnics. Computers and Geotechnics, 2005, 32(6): 458–481

[14] Callari C, Abati A. Finite element methods for unsaturated porous solids and their application to dam engineering problems. Computers & Structures, 2009, 87(7‒8): 485–501

[15] Nguyen V P, Lian H, Rabczuk T, Bordas S. Modelling hydraulic fractures in porous media using flow cohesive interface elements. Engineering Geology, 2017, 225: 68–82

[16] Samimi S, Pak A. Three-dimensional simulation of fully coupled hydro-mechanical behavior of saturated porous media using Element Free Galerkin (EFG) method. Computers and Geotechnics, 2012, 46: 75–83

[17] Goudarzi M, Mohammadi S. Weak discontinuity in porous media: an enriched EFG method for fully coupled layered porous media. International Journal for Numerical and Analytical Methods in Geomechanics, 2014, 38(17): 1792–1822

[18] Goudarzi M, Mohammadi S. Analysis of cohesive cracking in saturated porous media using an extrinsically enriched EFG method. Computers and Geotechnics, 2015, 63: 183–198

[19] Samimi S, Pak A. A three-dimensional mesh-free model for analyzing multi-phase flow in deforming porous media. Meccanica, 2016, 51(3): 517–536

[20] Mohammadnejad T, Khoei A. Hydro-mechanical modeling of cohesive crack propagation in multiphase porous media using the extended finite element method. International Journal for Numerical and Analytical Methods in Geomechanics, 2013, 37(10): 1247–1279

[21] Goodarzi M, Mohammadi S, Jafari A. Numerical analysis of rock fracturing by gas pressure using the extended finite element method. Petroleum Science, 2015, 12(2): 304–315

[22] Mohammadnejad T, Khoei A R. An extended finite element method for hydraulic fracture propagation in deformable porous media with the cohesive crack model. Finite Elements in Analysis and Design, 2013, 73: 77–95

[23] Zhuang X, Wang Q, Zhu H. A 3D computational homogenization model for porous material and parameters identification. Computational Materials Science, 2015, 96: 536–548

[24] Zhu H, Wang Q, Zhuang X. A nonlinear semi-concurrent multiscale method for fractures. International Journal of Impact Engineering, 2016, 87: 65–82

[25] Bayesteh H, Mohammadi S. Micro-based enriched multiscale homogenization method for analysis of heterogeneous materials. International Journal of Solids and Structures, 2017, 125: 22–42

[26] Fatemi Dehaghani P, Hatefi Ardakani S, Bayesteh H, Mohammadi S. 3D hierarchical multiscale analysis of heterogeneous SMA based materials. International Journal of Solids and Structures, 2017, 118–119: 24–40

[27] Beltzer A I. Entropy characterization of finite elements. International Journal of Solids and Structures, 1996, 33(24): 3549–3560

[28] Shannon C E. Communication theory of secrecy systems. Bell Labs Technical Journal, 1949, 28(4): 656–715

[29] Sukumar N. Construction of polygonal interpolants: a maximum entropy approach. International Journal for Numerical Methods in Engineering, 2004, 61(12): 2159–2181

[30] Arroyo M, Ortiz M. Local maximum-entropy approximation schemes: a seamless bridge between finite elements and meshfree methods. International Journal for Numerical Methods in Engineering, 2006, 65(13): 2167–2202

[31] Millán D, Sukumar N, Arroyo M. Cell-based maximum-entropy approximants. Computer Methods in Applied Mechanics and Engineering, 2015, 284: 712–731

[32] Ortiz A, Puso M, Sukumar N. Maximum-entropy meshfree method for compressible and near-incompressible elasticity. Computer Methods in Applied Mechanics and Engineering, 2010, 199(25): 1859–1871

[33] Ortiz A, Puso M, Sukumar N. Maximum-entropy meshfree method for incompressible media problems. Finite Elements in Analysis and Design, 2011, 47(6): 572–585

[34] Quaranta G, Kunnath S K, Sukumar N. Maximum-entropy meshfree method for nonlinear static analysis of planar reinforced concrete structures. Engineering Structures, 2012, 42: 179–189

[35] Ullah Z, Coombs W, Augarde C. An adaptive finite element/meshless coupled method based on local maximum entropy shape functions for linear and nonlinear problems. Computer Methods in Applied Mechanics and Engineering, 2013, 267: 111–132

[36] Amiri F, Anitescu C, Arroyo M, Bordas S P A, Rabczuk T. XLME interpolants, a seamless bridge between XFEM and enriched meshless methods. Computational Mechanics, 2014, 53(1): 45–57

[37] Amiri F, Millán D, Shen Y, Rabczuk T, Arroyo M. Phase-field modeling of fracture in linear thin shells. Theoretical and Applied Fracture Mechanics, 2014, 69: 102–109

[38] Amiri F, Millán D, Arroyo M, Silani M, Rabczuk T. Fourth order phase-field model for local max-ent approximants applied to crack propagation. Computer Methods in Applied Mechanics and Engineering, 2016, 312: 254–275

[39] Wu C, Young D, Hong H. Adaptive meshless local maximum-entropy finite element method for convection-diffusion problems. Computational Mechanics, 2014, 53(1): 189–200

[40] Kardani O, Nazem M, Kardani M, Sloan S. On the application of the maximum entropy meshfree method for elastoplastic geotechnical analysis. Computers and Geotechnics, 2017, 84: 68–77

[41] Nazem M, Kardani M, Bienen B, Cassidy M. A stable maximum-entropy meshless method for analysis of porous media. Computers and Geotechnics, 2016, 80: 248–260

[42] Navas P, López-Querol S, Yu R C, Li B. Meshfree Methods Applied to Consolidation Problems in Saturated Soils. In: Weinberg K, Pandolfi A, eds. Innovative Numerical Approaches for Multi-Field and Multi-Scale Problems. Springer, 2016, 241–264

[43] Navas P, López-Querol S, Yu R C, Li B. B-bar based algorithm applied to meshfree numerical schemes to solve unconfined seepage problems through porous media. International Journal for Numerical and Analytical Methods in Geomechanics, 2016, 40(6): 962–984

[44] Navas P, Yu R C, López-Querol S, Li B. Dynamic consolidation problems in saturated soils solved through u–w formulation in a LME meshfree framework. Computers and Geotechnics, 2016, 79: 55–72

[45] Zakrzewski N, Nazem M, Sloan S W, Cassidy M On application of the maximum entropy meshless method for large deformation analysis of geotechnical problems. In: Gu Y, Guan H, Sauret E, Saha S, Zhan H, Persky R, eds. Applied Mechanics and Materials. 2016. Trans Tech Publ, 331–335

[46] Lewis R W, Schrefler B A. The finite Element Method in the Static and Dynamic Deformation and Consolidation of Porous Media. John Wiley& Sons, 1998

[47] Jaynes E T. On the rationale of maximum-entropy methods. Proceedings of the IEEE, 1982, 70(9): 939–952

[48] Gull S F, Skilling J. Maximum entropy method in image processing. In: IEE Proceedings F- Communications, Radar and Signal Processing. IET, 1984

[49] Golan A, Judge G G, Miller D. Maximum Entropy Econometrics. John Wiley & Sons, 1996

[50] .Karmeshu J. Entropy Measures, Maximum Entropy Principle and Emerging Applications. Springer Science & Business Media, 2003

[51] Jaynes E T. Information theory and statistical mechanics. Physical Review, 1957, 106(4): 620–630

[52] Gawin D, Baggio P, Schrefler B A. Coupled heat, water and gas flow in deformable porous media. International Journal for Numerical Methods in Fluids, 1995, 20(8–9): 969–987 doi:10.1002/fld.1650200817

[53] Khoei A, Mohammadnejad T. Numerical modeling of multiphase fluid flow in deforming porous media: a comparison between two-and three-phase models for seismic analysis of earth and rockfill dams. Computers and Geotechnics, 2011, 38(2): 142–166

[54] Schrefler B A, Scotta R. A fully coupled dynamic model for two-phase fluid flow in deformable porous media. Computer Methods in Applied Mechanics and Engineering, 2001, 190(24–25): 3223–3246

[55] Brooks R H, Corey A T, 0. Hydraulic properties of porous media and their relation to drainage design. Transactions of the ASAE. American Society of Agricultural Engineers, 1964, 7(1): 26–28

[56] Booker J R, Small J. Finite layer analysis of consolidation. I. International Journal for Numerical and Analytical Methods in Geomechanics, 1982, 6(2): 151–171

[57] Booker J, Small J. A method of computing the consolidation behaviour of layered soils using direct numerical inversion of Laplace transforms. International Journal for Numerical and Analytical Methods in Geomechanics, 1987, 11(4): 363–380

[58] Gibson R, Schiffman R, Pu S. Plane strain and axially symmetric consolidation of a clay layer on a smooth impervious base. Quarterly Journal of Mechanics and Applied Mathematics, 1970, 23(4): 505–520

[59] Aboustit B, Advani S, Lee J. Variational principles and finite element simulations for thermo-elastic consolidation. International Journal for Numerical and Analytical Methods in Geomechanics, 1985, 9(1): 49–69

[60] Liakopoulos A C. Transient Flow Through Unsaturated Porous Media. Dissertation for PhD degree. University of California, Berkeley. 1964

[61] Narasimhan T N, Witherspoon P. Numerical model for saturated-unsaturated flow in deformable porous media: 3. Applications. Water Resources Research, 1978, 14(6): 1017–1034

[62] Schrefler B, Simoni L. A unified approach to the analysis of saturated-unsaturated elastoplastic porous media. Numerical Methods in Geomechanics, 1988, 1: 205–212

[63] Zienkiewicz O, Xie Y M, Schrefler B A, Ledesma A, BicanicN. Static and dynamic behaviour of soils: a rational approach to quantitative solutions. II. Semi-saturated problems. In: Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences. The Royal Society, 1990

[64] Schrefler B, Zhan X. A fully coupled model for water flow and airflow in deformable porous media. Water Resources Research, 1993, 29(1): 155–167

[65] Gawin D, Schrefler B A, Galindo M. Thermo-hydro-mechanical analysis of partially saturated porous materials. Engineering Computations, 1996, 13(7): 113–143

[66] .Wang X W, Schrefler B. Fully coupled thermo-hydro-mechanical analysis by an algebraic multigrid method. Engineering Computations, 2003, 20(2): 211–229

[67] Ehlers W, Graf T, Ammann M. Deformation and localization analysis of partially saturated soil. Computer Methods in Applied Mechanics and Engineering, 2004, 193(27): 2885–2910

RIGHTS & PERMISSIONS

Higher Education Press and Springer-Verlag GmbH Germany, part of Springer Nature