Detection of void and metallic inclusion in 2D piezoelectric cantilever beam using impedance measurements

Abstract

The aim of current work is to improve the existing inverse methodology of void-detection based on a target impedance curve, leading to quick-prediction of the parameters of single circular void. In this work, mode-shape dependent shifting phenomenon of peaks of impedance curve with change in void location has been analyzed. A number of initial guesses followed by an iterative optimization algorithm based on univariate method has been used to solve the problem. In each iteration starting from each initial guess, the difference between the computationally obtained impedance curve and the target impedance curve has been reduced. This methodology has been extended to detect single circular metallic inclusion in 2D piezoelectric cantilever beam. A good accuracy level was observed for detection of flaw radius and flaw-location along beam-length, but not the precise location along beam-width.

Keywords

piezoelectricity / impedance curve / mode shapes / inverse problem / flaw detection / curve shifting

References

[1] Galasso F S. Structure, Properties, and Preparation of Perovskite-Type Compounds. Oxford: Pergamon Press, 1969

[2] Nanthakumar S, Lahmer T, Rabczuk T. Detection of flaws in piezoelectric structures using extended fem. International Journal for Numerical Methods in Engineering, 2013, 96(6): 373–389

[3] Areias P, Rabczuk T. Steiner-point free edge cutting of tetrahedral meshes with applications in fracture. Finite Elements in Analysis and Design, 2017, 132: 27–41

[4] Areias P, Rabczuk T, Msekh M. Phase-field analysis of finite-strain plates and shells including element subdivision. Computer Methods in Applied Mechanics and Engineering, 2016, 312: 322–350

[5] Areias P, Rabczuk T, de Sá J C. A novel two-stage discrete crack method based on the screened Poisson equation and local mesh refinement. Computational Mechanics, 2016, 58(6): 1003–1018

[6] Areias P, Msekh M, Rabczuk T. Damage and fracture algorithm using the screened Poisson equation and local remeshing. Engineering Fracture Mechanics, 2016, 158: 116–143

[7] Areias P, Reinoso J, Camanho P, Rabczuk T. A constitutive-based element-by-element crack propagation algorithm with local mesh refinement. Computational Mechanics, 2015, 56(2): 291–315

[8] Areias P, Rabczuk T, Camanho P. Finite strain fracture of 2D problems with injected anisotropic softening elements. Theoretical and Applied Fracture Mechanics, 2014, 72(1): 50–63

[9] Areias P, Rabczuk T, Dias-da Costa D. Element-wise fracture algorithm based on rotation of edges. Engineering Fracture Mechanics, 2013, 110: 113–137

[10] Areias P, Rabczuk T. Finite strain fracture of plates and shells with configurational forces and edge rotations. International Journal for Numerical Methods in Engineering, 2013, 94(12): 1099–1122

[11] Areias P, Rabczuk T, Camanho P. Initially rigid cohesive laws and fracture based on edge rotations. Computational Mechanics, 2013, 52(4): 931–947

[12] Areias P, Reinoso J, Camanho P, de Sá J C, Rabczuk T. Effective 2D and 3D crack propagation with local mesh refinement and the screened Poisson equation. Engineering Fracture Mechanics, 2018, 189: 339–360

[13] Nguyen-Xuan H, Liu G, Bordas S, Natarajan S, Rabczuk T. An adaptive singular ES-FEM for mechanics problems with singular field of arbitrary order. Computer Methods in Applied Mechanics and Engineering, 2013, 253: 252–273

[14] Zhuang X, Huang R, Liang C, Rabczuk T. A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage. Mathematical Problems in Engineering, 2014, 179169

[15] Moës N, Dolbow J, Belytschko T. A finite element method for crack growth without remeshing. International Journal for Numerical Methods in Engineering, 1999, 46(1): 133–150

[16] Belytschko T, Black T. Elastic crack growth in finite elements with minimal remeshing. International Journal for Numerical Methods in Engineering, 1999, 45(5): 601–620

[17] Chen L, Rabczuk T, Bordas S, Liu G, Zeng K, Kerfriden P. Extended finite element method with edge-based strain smoothing (ESM-XFEM) for linear elastic crack growth. Computer Methods in Applied Mechanics and Engineering, 2012, 209–212: 250–265

[18] Bordas S, Rabczuk T, Hung N X, Nguyen V, Natarajan S, Bog T, Quan D, Hiep N. Strain smoothing in fem and XFEM. Computers & Structures, 2010, 88(23–24): 1419–1443

[19] Song J H, Areias P M A, Belytschko T. A method for dynamic crack and shear band propagation with phantom nodes. International Journal for Numerical Methods in Engineering, 2006, 67(6): 868–893

[20] Tabarraei A, Song J H, Waisman H. A two-scale strong discontinuity approach for evolution of shear bands under dynamic impact loads. International Journal for Multiscale Computational Engineering, 2013, 11(6): 543–563

[21] Areias P, Song J, Belytschko T. Analysis of fracture in thin shells by overlapping paired elements. International Journal for Numerical Methods in Engineering, 2006, 195: 5343–5360

[22] Chau-Dinh T, Zi G, Lee P S, Rabczuk T, Song J H. Phantom-node method for shell models with arbitrary cracks. Computers and Structures, 2012, 92–93: 242–246

[23] Rabczuk T, Zi G, Gerstenberger A, Wall W. A new crack tip element for the phantom-node method with arbitrary cohesive cracks. International Journal for Numerical Methods in Engineering, 2008, 75(5): 577–599

[24] Vu-Bac N, Nguyen-Xuan H, Chen L, Lee C, Zi G, Zhuang X, Liu G, Rabczuk T. A phantom-node method with edge-based strain smoothing for linear elastic fracture mechanics. Journal of Applied Mathematics, 2013, 978026

[25] Msekh M, Cuong N, Zi G, Areias P, Zhuang X, Rabczuk T. Fracture properties prediction of clay/epoxy nanocomposites with interphase zones using a phase field model. Engineering Fracture Mechanics, 2018, 188: 287–299

[26] Hamdia K, Silani M, Zhuang X, He P, Rabczuk T. Stochastic analysis of the fracture toughness of polymeric nanoparticle composites using polynomial chaos expansions. International Journal of Fracture, 2017, 206(2): 215–227

[27] Silani M, Talebi H, Hamouda A, Rabczuk T. Nonlocal damage modeling in clay/epoxy nanocomposites using a multiscale approach. Journal of Computational Science, 2016, 15: 18–23

[28] Talebi H, Silani M, Rabczuk T. Concurrent multiscale modeling of three dimensional crack and dislocation propagation. Advances in Engineering Software, 2015, 80(C): 82–92

[29] Talebi H, Silani M, Bordas S, Kerfriden P, Rabczuk T. A computational library for multiscale modeling of material failure. Computational Mechanics, 2014, 53(5): 1047–1071

[30] Budarapu P, Gracie R, Yang S W, Zhuang X, Rabczuk T. Efficient coarse graining in multiscale modeling of fracture. Theoretical and Applied Fracture Mechanics, 2014, 69: 126–143

[31] Budarapu P, Gracie R, Bordas S, Rabczuk T. An adaptive multiscale method for quasi-static crack growth. Computational Mechanics, 2014, 53(6): 1129–1148

[32] Zhang C, Nanthakumar S, Lahmer T, Rabczuk T. Multiple cracks identification for piezoelectric structures. International Journal of Fracture, 2017, 206(2): 151–169

[33] Nanthakumar S, Zhuang X, Park H, Rabczuk T. Topology optimization of flexoelectric structures. Journal of the Mechanics and Physics of Solids, 2017, 105: 217–234

[34] Nanthakumar S, Lahmer T, Zhuang X, Park H, Rabczuk T. Topology optimization of piezoelectric nanostructures. Journal of the Mechanics and Physics of Solids, 2016, 94: 316–335

[35] Nanthakumar S, Valizadeh N, Park H, Rabczuk T. Surface effects on shape and topology optimization of nanostructures. Computational Mechanics, 2015, 56(1): 97–112

[36] Nanthakumar S, Lahmer T, Zhuang X, Zi G, Rabczuk T. Detection of material interfaces using a regularized level set method in piezoelectric structures. Inverse Problems in Science and Engineering, 2016, 24(1): 153–176

[37] Nanthakumar S, Lahmer T, Rabczuk T. Detection of multiple flaws in piezoelectric structures using XFEM and level sets. Computer Methods in Applied Mechanics and Engineering, 2014, 275: 98–112

[38] Nanthakumar S, Lahmer T, Rabczuk T. Detection of flaws in piezoelectric structures using extended fem. International Journal for Numerical Methods in Engineering, 2013, 96(6): 373–389

[39] Gerstle W, Sau N, Silling S. Peridynamic modeling of concrete structures. Nuclear Engineering and Design, 2007, 237(12–13): 1250–1258

[40] Silling S. Reformulation of elasticity theory for discontinuities and long-range forces. Journal of the Mechanics and Physics of Solids, 2000, 48(1): 175–209

[41] Ren H, Zhuang X, Rabczuk T. Dual-horizon peridynamics: A stable solution to varying horizons. Computer Methods in Applied Mechanics and Engineering, 2017, 318: 762–782

[42] Ren H, Zhuang X, Cai Y, Rabczuk T. Dual-horizon peridynamics. International Journal for Numerical Methods in Engineering, 2016, 108(12): 1451–1476

[43] Belytschko T, Lu Y, Gu L. Element-free Galerkin methods. International Journal for Numerical Methods in Engineering, 1994, 37(2): 229–256

[44] Fleming M, Chu Y, Moran B, Belytschko T. Enriched element-free Galerkin methods for crack tip fields. International Journal for Numerical Methods in Engineering, 1997, 40(8): 1483–1504

[45] Belytschko T, Tabbara M. Dynamic fracture using element-free Galerkin methods. International Journal for Numerical Methods in Engineering, 1996, 39(6): 923–938

[46] Belytschko T, Krongauz Y, Organ D, Fleming M, Krysl P. Meshless methods: An overview and recent developments. Computer Methods in Applied Mechanics and Engineering, 1996, 139(1–4): 3–47

[47] Rabczuk T, Belytschko T, Xiao S. Stable particle methods based on Lagrangian kernels. Computer Methods in Applied Mechanics and Engineering, 2004, 193(12–14): 1035–1063

[48] Nguyen V, Rabczuk T, Bordas S, Duflot M. Meshless methods: A review and computer implementation aspects. Mathematics and Computers in Simulation, 2008, 79(3): 763–813

[49] Zhuang X, Augarde C, Mathisen K. Fracture modeling using meshless methods and level sets in 3D: Framework and modeling. International Journal for Numerical Methods in Engineering, 2012, 92(11): 969–998

[50] Rabczuk T, Belytschko T. Cracking particles: A simplified meshfree method for arbitrary evolving cracks. International Journal for Numerical Methods in Engineering, 2004, 61(13): 2316–2343

[51] Rabczuk T, Zi G, Bordas S, Nguyen-Xuan H. A simple and robust three-dimensional cracking-particle method without enrichment. Computer Methods in Applied Mechanics and Engineering, 2010, 199(37–40): 2437–2455

[52] Rabczuk T, Samaniego E. Discontinuous modelling of shear bands using adaptive meshfree methods. Computer Methods in Applied Mechanics and Engineering, 2008, 197(6–8): 641–658

[53] Rabczuk T, Areias P, Belytschko T. A simplified mesh-free method for shear bands with cohesive surfaces. International Journal for Numerical Methods in Engineering, 2007, 69(5): 993–1021

[54] Rabczuk T, Belytschko T. A three-dimensional large deformation meshfree method for arbitrary evolving cracks. Computer Methods in Applied Mechanics and Engineering, 2007, 196(29–30): 2777–2799

[55] Bordas S, Rabczuk T, Zi G. Three-dimensional crack initiation, propagation, branching and junction in non-linear materials by an extended meshfree method without asymptotic enrichment. Engineering Fracture Mechanics, 2008, 75(5): 943–960

[56] Rabczuk T, Areias P, Belytschko T. A meshfree thin shell method for nonlinear dynamic fracture. International Journal for Numerical Methods in Engineering, 2007, 72(5): 524–548

[57] Rabczuk T, Bordas S, Zi G. A three-dimensional meshfree method for continuous multiple-crack initiation, propagation and junction in statics and dynamics. Computational Mechanics, 2007, 40(3): 473–495

[58] Zi G, Rabczuk T, Wall W. Extended meshfree methods without branch enrichment for cohesive cracks. Computational Mechanics, 2007, 40(2): 367–382

[59] Rabczuk T, Zi G. A meshfree method based on the local partition of unity for cohesive cracks. Computational Mechanics, 2007, 39(6): 743–760

[60] Rabczuk T, Areias P. A meshfree thin shell for arbitrary evolving cracks based on an extrinsic basis. Computer Modeling in Engineering & Sciences, 2006, 16(2): 115–130

[61] Rabczuk T, Zi G, Bordas S, Nguyen-Xuan H. A geometrically non-linear three-dimensional cohesive crack method for reinforced concrete structures. Engineering Fracture Mechanics, 2008, 75(16): 4740–4758

[62] Rabczuk T, Gracie R, Song J H, Belytschko T. Immersed particle method for fluid-structure interaction. International Journal for Numerical Methods in Engineering, 2010, 81(1): 48–71

[63] Rabczuk T, Bordas S, Zi G. On three-dimensional modelling of crack growth using partition of unity methods. Computers & Structures, 2010, 88(23–24): 1391–1411

[64] Amiri F, Anitescu C, Arroyo M, Bordas S, Rabczuk T. XLME interpolants, a seamless bridge between XFEM and enriched meshless methods. Computational Mechanics, 2014, 53(1): 45–57

[65] Amiri F, Millán D, Shen Y, Rabczuk T, Arroyo M. Phase-field modeling of fracture in linear thin shells. Theoretical and Applied Fracture Mechanics, 2014, 69: 102–109

[66] Hughes T J, Cottrell J A, Bazilevs Y. Isogeometric analysis: CAD, finite elements, NURBS, exact geometry and mesh refinement. Computer Methods in Applied Mechanics and Engineering, 2005, 194(39–41): 4135–4195

[67] Cottrell J A, Hughes T J, Bazilevs Y. Isogeometric Analysis: Toward Integration of CAD and FEA. New York: John Wiley & Sons, 2009

[68] Benson D, Bazilevs Y, Hsu M C, Hughes T. Isogeometric shell analysis: The Reissner-Mindlin shell. Computer Methods in Applied Mechanics and Engineering, 2010, 199(5–8): 276–289

[69] Benson D, Bazilevs Y, Hsu M C, Hughes T. A large deformation, rotation-free, isogeometric shell. Computer Methods in Applied Mechanics and Engineering, 2011, 200(13–16): 1367–1378

[70] Nguyen-Thanh N, Zhou K, Zhuang X, Areias P, Nguyen-Xuan H, Bazilevs Y, Rabczuk T. Isogeometric analysis of large-deformation thin shells using RHT-splines for multiple-patch coupling. Computer Methods in Applied Mechanics and Engineering, 2017, 316: 1157–1178

[71] Nguyen-Thanh N, Kiendl J, Nguyen-Xuan H, Wüchner R, Bletzinger K U, Bazilevs Y, Rabczuk T. Rotation free isogeometric thin shell analysis using PHT-splines. Computer Methods in Applied Mechanics and Engineering, 2011, 200(47–48): 3410–3424

[72] Pawar A, Zhang Y, Jia Y, Wei X, Rabczuk T, Chan C, Anitescu C. Adaptive FEM-based nonrigid image registration using truncated hierarchical B-splines. Computers & Mathematics with Applications (Oxford, England), 2016, 72(8): 2028–2040

[73] Jia Y, Zhang Y, Rabczuk T. A novel dynamic multilevel technique for image registration. Computers & Mathematics with Applications (Oxford, England), 2015, 69(9): 909–925

[74] Thai T, Rabczuk T, Bazilevs Y, Meschke G. A higher-order stress-based gradient-enhanced damage model based on isogeometric analysis. Computer Methods in Applied Mechanics and Engineering, 2016, 304: 584–604

[75] Ghasemi H, Park H S, Rabczuk T. A multi-material level set-based topology optimization of flexoelectric composites. Computer Methods in Applied Mechanics and Engineering, 2018, 332: 47–62

[76] Ghasemi H, Park H, Rabczuk T. A level-set based IGA formulation for topology optimization of flexoelectric materials. Computer Methods in Applied Mechanics and Engineering, 2017, 313: 239–258

[77] Ghasemi H, Park H, Rabczuk T. Multi-material level set-based topology optimization of flexoelectric composites. Computer Methods in Applied Mechanics and Engineering, 2018, 332: 47–62

[78] Ghasemi H, Brighenti R, Zhuang X, Muthu J, Rabczuk T. Optimal fiber content and distribution in fiber-reinforced solids using a reliability and NURBS based sequential optimization approach. Structural and Multidisciplinary Optimization, 2015, 51(1): 99–112

[79] Anitescu C, Hossain M, Rabczuk T. Recovery-based error estimation and adaptivity using high-order splines over hierarchical T-meshes. Computer Methods in Applied Mechanics and Engineering, 2018, 328: 638–662

[80] Nguyen-Thanh N, Nguyen-Xuan H, Bordas S, Rabczuk T. Isogeometric analysis using polynomial splines over hierarchical T-meshes for two-dimensional elastic solids. Computer Methods in Applied Mechanics and Engineering, 2011, 200(21–22): 1892–1908

[81] Nguyen V, Anitescu C, Bordas S, Rabczuk T. Isogeometric analysis: An overview and computer implementation aspects. Mathematics and Computers in Simulation, 2015, 117: 89–116

[82] Anitescu C, Jia Y, Zhang Y, Rabczuk T. An isogeometric collocation method using super-convergent points. Computer Methods in Applied Mechanics and Engineering, 2015, 284: 1073–1097

[83] Nguyen B, Tran H, Anitescu C, Zhuang X, Rabczuk T. An isogeometric symmetric Galerkin boundary element method for two-dimensional crack problems. Computer Methods in Applied Mechanics and Engineering, 2016, 306: 252–275

[84] Jia Y, Anitescu C, Ghorashi S, Rabczuk T. Extended isogeometric analysis for material interface problems. IMA Journal of Applied Mathematics, 2015, 80(3): 608–633

[85] Ghorashi S, Valizadeh N, Mohammadi S, Rabczuk T. T-spline based XIGA for fracture analysis of orthotropic media. Computers & Structures, 2015, 147: 138–146

[86] Nguyen-Thanh N, Valizadeh N, Nguyen M, Nguyen-Xuan H, Zhuang X, Areias P, Zi G, Bazilevs Y, De Lorenzis L, Rabczuk T. An extended isogeometric thin shell analysis based on Kirchhoff-Love theory. Computer Methods in Applied Mechanics and Engineering, 2015, 284: 265–291

[87] Chan C, Anitescu C, Rabczuk T. Volumetric parametrization from a level set boundary representation with PHT-splines. Computer Aided Design, 2017, 82: 29–41

[88] Pérez N, Carbonari R C, Andrade M A B, Buiochi F, Adamowski J C. A FEM-based method to determine the complex material properties of piezoelectric disks. Ultrasonics, 2014, 54(6): 1631–1641

[89] Kiyono C Y, Pérez N, Silva E C N. Determination of full piezoelectric complex parameters using gradient-based optimization algorithm. Smart Materials and Structures, 2016, 25(2): 025019

[90] Pérez N, Buiochi F, Brizzotti Andrade M, Adamowski J. Numerical characterization of piezoceramics using resonance curves. Materials (Basel), 2016, 9(2): 71

[91] Vu-Bac N, Duong T, Lahmer T, Zhuang X, Sauer R, Park H, Rabczuk T. A NURBS-based inverse analysis for reconstruction of nonlinear deformations in thin shell structures. Computer Methods in Applied Mechanics and Engineering, 2018, 331: 427–455

[92] Ikeda T. Piezoelectricity. Oxford: Oxford University Press, 1990

[93] Yang J. An introduction to the theory of piezoelectricity. Vol. 9. Berlin: Springer, 2004

[94] Allik H, Hughes T J. Finite element method for piezoelectric vibration. International Journal for Numerical Methods in Engineering, 1970, 2(2): 151–157

[95] Holland R. Representation of dielectric, elastic, and piezoelectric losses by complex coefficients. IEEE Transactions on Sonics and Ultrasonics, 1967, 14(1): 18–20

[96] Lahrner T, Kaltenbacher M, Kaltenbacher B, Lerch R, Leder E. FEM-based determination of real and complex elastic, dielectric, and piezoelectric moduli in piezoceramic materials. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2008, 55(2): 465–475

[97] Huyer W, Neumaier A. Global optimization by multilevel coordinate search. Journal of Global Optimization, 1999, 14(4): 331–355

[98] Vu-Bac N, Lahmer T, Zhuang X, Nguyen-Thoi T, Rabczuk T. A software framework for probabilistic sensitivity analysis for computationally expensive models. Advances in Engineering Software, 2016, 100: 19–31

RIGHTS & PERMISSIONS

Higher Education Press and Springer-Verlag GmbH Germany, part of Springer Nature