Acid-treated carbon nanotubes and their effects on mortar strength

Abstract

In the present study, multi-walled carbon nanotubes (MWCNTs) were treated in an acidic mixture solution, made with nitric and sulfuric acids in a ratio of 3:1 by volume. The durations of the treatment were 100 and 180 min. The defects of these treated MWCNTs were examined using Raman spectroscopy. The attachment of hydroxyl functional groups to the walls of the MWCNTs were verified using FTIR spectroscopy. The dispersion of CNTs with acid treatment is assessed using UV-Vis spectroscopy and Scanning Electron Microscopy (SEM). The results indicate that the duration of the acid treatment has significant effect on both the degree of defects and functionality of the MWCNT. The compressive strength of mortar increased with the addition of the acid-treated MWCNTs; however, no appreciable difference was noted for the two treatment durations under this study.

Keywords

carbon nanotubes / concrete / composites / nanomaterials / cement

References

[1] Gopalakrishnan K, Birgisson B, Taylor P, Attoh-Okine N O. Nanotechnology in Civil Infrastructure. Springer, 2011

[2] Inkyo M, Tahara T, Iwaki T, Iskandar F, Hogan C J, Okuyama K.Experimental investigation of nanoparticle dispersion by beads milling with centrifugal bead separation. Journal of colloid and interface science, 2006, 304(2): 535–540

[3] Tchoul M N, Ford W T, Lolli G, Resasco D E, Arepalli S. Effect of mild nitric acid oxidation on dispersability, size, and structure of single-walled carbon nanotubes. Chemistry of Materials，200719(23):5765–5772

[4] Konsta-Gdoutos M S, Metaxa Z S, Shah S P. Highly dispersed carbon nanotube reinforced cement based materials. Cement and Concrete Research, 2010, 40(7): 1052–1059

[5] Metaxa Z S, Seo J W T, Konsta-Gdoutos M S, Hersam M C, Shah S P. Highly concentrated carbon nanotube admixture for nano-fiber reinforced cementitious materials. Cement and Concrete Composites, 2012, 34(5): 612–617

[6] Sobolkina A, Mechtcherine V, Khavrus V, Maier D, Mende M, Ritschel M. Leonhardt A.Dispersion of carbon nanotubes and its influence on the mechanical properties of the cement matrix. Cement and Concrete Composites, 2012, 34(10): 1104–1113

[7] Saez de Ibarra Y, Gaitero J, Erkizia E, Campillo I. Atomic force microscopy and nanoindentation of cement pastes with nanotube dispersions. physica status solidi (a), 2006, 203(6): 1076–1081

[8] Wansom S, Kidner N, Woo L, Mason T. Ac-impedance response of multi-walled carbon nanotube/cement composites. Cement and Concrete Composites, 2006, 28(6): 509–519

[9] Hilding J, Grulke E A, George Zhang Z, Lockwood F. Dispersion of carbon nanotubes in liquids. Journal of dispersion science and technology, 2003, 24(1): 1–41

[10] Yazdanbakhsh A, Grasley Z, Tyson B, Al-Rub R A. Carbon nano filaments in cementitious materials: Some issues on dispersion and interfacial bond. ACI Special Publications, 2009, 267

[11] Li G Y, Wang P M, Zhao X.Mechanical behavior and microstructure of cement composites incorporating surface-treated multi-walled carbon nanotubes. Carbon, 2005, 43(6):1239–1245

[12] Rosca I D, Watari F, Uo M, Akasaka T. Oxidation of multiwalled carbon nanotubes by nitric acid. Carbon, 2005, 43(15): 3124–3131

[13] Li Y, Zhang X, Luo J, Huang W, Cheng J, Luo Z, Li T, Liu F, Xu G, Ke X. Purification of cvd synthesized single-wall carbon nanotubes by different acid oxidation treatments. Nanotechnology, 2004, 15(11): 1645

[14] Makar J, Margeson J, Luh J.Carbon nanotube/cement composites-early results and potential applications, 2005

[15] Cwirzen A, Habermehl-Cwirzen K, Penttala V. Surface decoration of carbon nanotubes and mechanical properties of cement/carbon nanotube composites. Advances in cement research, 2008, 20(2): 65–73

[16] Konsta-Gdoutos M S, Metaxa Z S,Shah S P.Multi-scale mechanical and fracture characteristics and early-age strain capacity of high performance carbon nanotube/cement nanocomposites. Cement and Concrete Composites, 2010, 32(2): 110–115

[17] Lu K, Lago R, Chen Y, Green M, Harris P, Tsang S. Mechanical damage of carbon nanotubes by ultrasound. Carbon, 1996, 34(6):814–816

[18] Rossell M D, Kuebel C, Ilari G, Rechberger F, Heiligtag F J, Niederberger M, Koziej D, Erni R. Impact of sonication pretreatment on carbon nanotubes: A transmission electron microscopy study. Carbon, 2013, 61: 404–411

[19] Natsuki T, Melvin G J H, Ni Q Q.Vibrational frequencies and raman radial breathing modes of multi-walled carbon nanotubes based on continuum mechanics. Journal of Materials Science Research, 2013, 2(4):1

[20] Dresselhaus M S, Dresselhaus G, Saito R, Jorio A. Raman spectroscopy of carbon nanotubes. Physics reports, 2005, 409(2): 47–99

[21] Atieh M A, Bakather O Y, Al-Tawbini B, Bukhari A A, Abuilaiwi F A, Fettouhi M B. Effect of carboxylic functional group functionalized on carbon nanotubes surface on the removal of lead from water. Bioinorganic Chemistry and Applications, 2010(2010): 603978

[22] Lauret J S, Voisin C, Cassabois G, Delalande C, Roussignol P, Jost O, Capes L.Ultrafast carrier dynamics in single-wall carbon nanotubes. Physical review letters, 2003, 90(5):057404

[23] Yu J, Grossiord N, Koning C E, Loos J. Controlling the dispersion of multi-wall carbon nanotubes in aqueous surfactant solution. Carbon, 2007, 45(3): 618–623

[24] Rance G A, Marsh D H, Nicholas R J,Khlobystov A N. Uv–vis absorption spectroscopy of carbon nanotubes: Relationship between the π-electron plasmon and nanotube diameter. Chemical Physics Letters, 2010, 49<?Pub Caret?>3(1):19–23

RIGHTS & PERMISSIONS

Higher Education Press and Springer-Verlag Berlin Heidelberg