Modeling of semi-rigid beam-to-column steel joints under extreme loading

Abstract

Joints play an important role in providing ductility for steel-composite structures subject to extreme loading conditions, such as blast, fire and impact. Due to sound energy dissipation capability and fabrication efficiency, semi-rigid joints have increasingly received attention during the last decade. This paper presents a component approach for modeling semi-rigid beam-to-column joints based on Eurocode3, where the post-elastic response, including component strain hardening and ultimate rotational capacity, is also considered. Failure criteria are defined based on the ultimate deformation capacity of components and bolt-rows. The model enables a direct integration of joint response into global frame models with the consideration of axial deformability, such that the interaction between bending moment and axial force within the joints can be realistically captured. In addition, elevated temperature can be considered in the joint model via the degradation of the component response. Through comparisons with available test data, the joint model is shown to have good accuracy, and the failure criteria are found to be reliable yet conservative. The strain hardening response of components is shown to have significant influence on the ultimate bending capacity of the joints, while neglecting it usually leads to a conservative prediction.

Keywords

semi-rigid joint / component method / ductility / elevated temperature

References

[1] Lawson R M. Behaviour of steel beam-to-column connections in fire. Structural Engineer, 1990, 68(14): 263-271

[2] Leston-Jones L C, Burgess I W, Lennon T, Plank R J. Elevated-temperature moment-rotation tests on steelwork connections. Proceedings of the Institution of Civil Engineers. Structures and Buildings, 1997, 122(4): 410-419

[3] Wang Y C, Dai X H, Bailey C G. An experimental study of relative structural fire behaviour and robustness of different types of steel joint in restrained steel frames. Journal of Constructional Steel Research, 2011, 67(7): 1149-1163

[4] Yu H X, Burgess I W, Davison J B, Plank R J. Tying Capacity of Web Cleat Connections in Fire,Part 1: Test and Finite Element Simulation. Engineering Structures, 2009, 31(3): 651-663

[5] Al-Jabri K S, Burgess I W, Lennon T, Plank R J. Moment–rotation–temperature curves forsemi-rigid joints. Journal of Constructional Steel Research, 2005, 61(3): 281-303

[6] El-Rimawi J A, Burgess I W, Plank R J. The influence of connection stiffness on the behaviour of steel beams in fire. Journal of Constructional Steel Research, 1997, 43(1-3): 1-15

[7] Al-Jabri K S, Seibi A, Karrech A. Modelling of unstiffened flush end-plate bolted connections in fire. Journal of Constructional Steel Research, 2006, 62(1-2): 151-159

[8] Liu T C H. Finite element modelling of behaviour of steel beams andconnections in fire. Journal of Constructional Steel Research, 1996, 36(3): 181-199

[9] Qian Z H, Tan K H, Burgess I W. Numerical and analytical investigations of steel beam-to-column joints at elevated temperatures. Journal of Constructional Steel Research, 2009, 65(5): 1043-1054

[10] Dai X H, Wang Y C, Bailey C G. Numerical modelling of structural fire behaviour of restrained steel beam–column assemblies using typical joint types. Engineering Structures, 2010, 32(8): 2337-2351

[11] Kalogeropoulos A, Drosopoulos G A, Stavroulakis G E. Thermal–stress analysis of a three-dimensional end-plate steel joint. Construction & Building Materials, 2012, 29: 619-626

[12] EN 1993–1-8:2005. Eurocode 3: Design of Steel Structures – Part 1–8: Design of joints. European Committee for Standardization, Brussels, Belgium

[13] Block F M, Burgess I W, Davison J B, Plank R J. The development of a component-based connection element for endplate connections in fire. Fire Safety Journal, 2007, 42(6-7): 498-506

[14] Yu H X, Burgess I W, Davison J B, Plank R J. Tying capacity of web cleat connections in fire, Part 2: Development of component-based model. Engineering Structures, 2009, 31(3): 697-708

[15] Izzuddin B. Nonlinear dynamic analysis of framed structures. Dissertation for the Doctoral Degree. London: University of London, 1991

[16] Vlassis A G. Progressive collapse assessment of tall buildings. Dissertation for the Doctoral Degree. London: Imperial College London, 2007

[17] Spyrou S, Davison J B, Burgess I W, Plank R J. Experimental and analytical investigation of the ‘compression zone’ component within a steel joint at elevated temperatures. Journal of Constructional Steel Research, 2004, 60(6): 841-865

[18] Spyrou S, Davison J B, Burgess I W, Plank R J. Experimental and analytical investigation of the‘tension zone’ component within a steel joint at elevated temperatures. Journal of Constructional Steel Research, 2004, 60(6): 867-896

[19] Simões da Silva L, Santiago A, Vila R. Post-limit stiffness and ductility of end-plate beam-to-column steel joints. Computers & Structures, 2002, 80(5-6): 515-531

[20] Lima L R O, da Vellasco P C G, da Silva J G S, Borges L A C, da Silva L A P S. Post-limit stiffness prediction of semi-rigid joints using genetic algorithms. Latin American Journal of Solids and Structures, 2005, 2: 305-320

[21] Ren P, Crisinel M. Prediction method for moment–rotation behaviour of composite beam to steel column joint. Joints in steel structures III: Behaviour, strength and design. In: Proceedings of 3rd international workshop on connections in steel structures. Trento University, Italy, 1995, 33-46.

[22] Del Savio A A, Nethercot D A, Vellasco P C G S, Andrade S A L, Martha L F. Generalised component-based model for beam-to-column joints including axial versus moment interaction. Journal of Constructional Steel Research, 2009, 65(8-9): 1876-1895

[23] Al-Jabri K S, Burgess I W, Plank R J. Prediction of the degradation of Joint characteristics at elevated temperature. Journal of Constructional Steel Research, 2004, 60(3-5): 771-781

[24] Ramli-Sulong N H, Elghazouli A Y, Izzuddin B A. Behaviour and design of beam-to-column connections under fire conditions. Fire Safety Journal, 2007, 42(6-7): 437-451

[25] Kuhlmann U, Davison J B, Kattner M. Structural systems and rotation capacity. In: Proceeding of COST Conference on Control of the Semi-rigid Behaviour of Civil Engineering Structural Joints. Liege, Belgium, 1998, 167-176

[26] Fang C, Izzuddin B A, Elghazouli A Y, Nethercot D A. Robustness of steel-composite building structures subject to localised fire. Fire Safety Journal, 2011, 46(6): 348-363

[27] Fang C, Izzuddin B A, Obiala R, Elghazouli A Y, Nethercot D A. Robustness of multi-storey car parks under vehicle fire. Journal of Constructional Steel Research, 2012, 75: 72-84

[28] Sarraj M. The behaviour of steel fin plate joints in fire. Dissertation for the Doctoral Degree. Sheffield: The University of Sheffield, 2007

[29] Jarrett N D. Axial Tests on Beam/Column Joints. BRE Client Report CR 55/90, Building Research Establishment, Garston, Watford, UK, 1990

[30] Owens G W, Moore D B. The Robustness of Simple Joints. Structural Engineer, 1992, 70(3): 37-46

[31] Yu H X, Burgess I W, Davison J B, Plank R J. Experimental and numerical investigations of the behaviour of flush endplate connections at elevated temperatures. Journal of Structural Engineering, 2011, 137(1): 80-87

RIGHTS & PERMISSIONS

Higher Education Press and Springer-Verlag Berlin Heidelberg