Analysis of cement-treated clay behavior by micromechanical approach

Abstract

Experimental results show the significant influence of cement content on the mechanical properties of cement-treated clays. Cementation is produced by mixing a certain amount of cement with the saturated clay. The purpose of this paper is to model the cementation effect on the mechanical behavior of cement-treated clay. A micromechanical stress-strain model is developed considering explicitly the cementation at inter-cluster contacts. The inter-cluster bonding and debonding during mechanical loading are introduced in two ways: an additional cohesion in the shear sliding and a higher yield stress in normal compression. The model is used to simulate isotropic compression and undrained triaxial tests under various confining stresses on cement-treated Ariake clay and Singapore clay with various cement contents. The applicability of the present model is evaluated through comparisons between numerical and experimental results. The evolution of local stresses and local strains in inter-cluster planes are discussed in order to explain the induced anisotropy due to debonding at contact level under the applied loads. The numerical simulations demonstrate that the proposed micromechanical approach is well adapted for taking into account the main physical properties of cement-treated clay, including damage and induced anisotropy under mechanical loading.

Keywords

microstructure / cementation / clay / micromechanics / anisotropy / debonding

References

[1] Tatsuoka F, Kobayashi A. Triaxial strength characteristics of cement-treated clay. In: Proceedings of the 8th European Conference on SMFE. Helsinki, 1983, 8(1), 421–426

[2] Tremblay H, Leroueil S, Locat J. Mechanical improvement and vertical yield stress prediction of clayey soils from eastern Canada treated with lime or cement. Canadian Geotechnical Journal, 2001, 38(3): 567–579

[3] Horpibulsuk S, Miura N, Bergado D T. Undrained shear behavior of cement admixed clay at high water content. Journal of Geotechnical and Geoenviromeal Engineering, 2004, 130(10): 1096–1105

[4] Kamruzzaman A H M, Chew S H, Lee F H. Structuration and destructuration behavior of cement-treated Singapore marine clay. Journal of Geotechnical and Geoenvironmental Engineering, 2009, 135(4): 573–589

[5] Mitchell J K. Soil improvement—State of the art report. In: Proceedings of the 10th International Conference on Soil Mechanics and Foundation Engineering. Balkema, The Netherlands, 1981, 4: 509–565

[6] Çokça E. Use of Class C flyashes for the stabilization of an expansive soil. Journal of Geotechnical and Geoenvironmental Engineering, 2001, 127(7): 568–573

[7] Yin Z Y, Hattab M, Hicher P Y. Multiscale modeling of a sensitive marine clay. International Journal for Numerical and Analytical Methods in Geomechanics, 2011, 35(15): 1682–1702

[8] Yin Z Y, Chang C S, Hicher P Y, Wang J H. Micromechanical analysis for the behavior of stiff clay. Acta Mechanica Sinica, 2011, 27(6): 1013–1022

[9] Mitchell J K. Fundamentals of Soil Behaviour. 2nd ed. New York: Wiley, 1992

[10] Tatsuoka F, Uchida K, Imai K, Ouchi T, Kohata Y. Properties of cement treated soil in Trans-Tokyo Bay highway project. Ground Improvement, 1997, 1(1): 37–57

[11] Balasubramaniam A S, Lin D G, Sharma S S, Kamruzzaman A H M, Uddin K, Bergado D T. Behavior of soft Bangkok clay treated with additives. In: Proceedings of the 11th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering. Balkema, The Netherlands, 1999, 11–14

[12] Burland J B. On the compressibility and shear strength of natural soils. Geotechnique, 1990, 40(3): 329–378

[13] Leroueil S, Vaughan P R. The general and congruent effects of structure in natural soils and weak rock. Geotechnique, 1990, 40(3): 467–488

[14] Liu M D, Carter J P. Virgin compression of structured soils. Geotechnique, 1999, 49(1): 43–57

[15] Lee K, Chan D, Lam K. Constitutive model for cement treated clay in a critical state framework. Soil and Foundation, 2004, 44(3): 69–77

[16] Horpibulsuk S, Liu M D, Liyanapathirana D S, Suebsuk J. Behaviour of cemented clay simulated via the theoretical framework of the structured cam clay model. Computers and Geotechnics, 2010, 37(1–2): 1–9

[17] Batdorf S B, Budianski, B A. Mathematical theory of plasticity based on concept of slip. NACA Technical Note TN, 1949, 1871

[18] Calladine C R. Microstructural view of the mechanical properties of natural clays. Geotechnique, 1971, 21(4): 391–415

[19] Rothenburg L, Selvadurai A P S. Micromechanical definitions of the Cauchy stress tensor for particular media. In: Selvadurai APS , ed. Mechanics of Structured Media. Amsterdam: Elsevier, 1981, 469–486

[20] Pande G N, Sharma K G. Multi-laminate model of clays—a numerical evaluation of the influence of rotation of the principal stress axis. In: Desai C S, Saxena S K, eds. Proceedings of Symposium on Implementation of Computer Procedures and Stress–Strain Laws in Geotechnical Engineering. Chicago, Durham, NC: Acorn Press, 1982, 575–590

[21] Jenkins J T. Volume change in small strain axisymmetric deformations of a granular material. In: Satake M, Jenkins J T, eds. Micromechanics of Granular Materials, Amsterdam: Elsevier, 1988, 143–152

[22] Chang C S, Liao C. Constitutive relations for particulate medium with the effect of particle rotation. International Journal of Solids and Structures, 1990, 26(4): 437–453

[23] Bazant Z P, Xiang Y, Ozbolt J. Nonlocal microplane model for damage due to cracking. Proceedings of Engineering Mechanics, 1995, 2: 694–697

[24] Chang C S, Gao J. Second-gradient constitutive theory for granular material with random packing structure. International Journal of Solids and Structures, 1995, 32(16): 2279–2293

[25] Emeriault F, Cambou B. Micromechanical modelling of anisotropic non-linear elasticity of granular medium. International Journal of Solids and Structures, 1996, 33(18): 2591–2607

[26] Nicot F, Darve F. A multiscale approach to granular materials. Mechanics of Materials, 2005, 37(9): 980–1006

[27] Chang C S, Hicher P Y. An elastoplastic model for granular materials with microstructural consideration. International Journal of Solids and Structures, 2005, 42(14): 4258–4277

[28] Cudny M, Vermeer P A. On the modelling of anisotropy and destructuration of soft clays within the multi-laminate framework. Computers and Geotechnics, 2004, 31(1): 1–22

[29] Galavi V, Schweiger H. A multilaminate model with destructuration considering anisotropic strength and anisotropic bonding. Soil and Foundation, 2009, 49(3): 341–353

[30] Chang C S, Hicher P Y, Yin Z Y, Kong L R. An elasto-plastic model for clay with microstructural consideration. Journal of Engineering Mechanics, 2009, 135(9): 917–931

[31] Yin Z Y, Chang C S. Microstructural modelling of stress-dependent behaviour of clay. International Journal of Solids and Structures, 2009, 46(6): 1373–1388

[32] Yin Z Y, Chang C S. Non-uniqueness of critical state line in compression and extension conditions. International Journal for Numerical and Analytical Methods in Geomechanics, 2009, 33(10): 1315–1338

[33] Yin Z Y, Chang C S, Hicher P Y, Karstunen M. Micromechanical analysis of kinematic hardening in natural clay. International Journal of Plasticity, 2009, 25(8): 1413–1435

[34] Lagioia R, Nova R. An experimental and theoretical study of the behaviour of a calcarenite in triaxial compression. Geotechnique, 1995, 45(4): 633–648

RIGHTS & PERMISSIONS

Higher Education Press and Springer-Verlag Berlin Heidelberg