Higher-order mode effects on the seismic performance of tall piers

Zhongguo GUAN , Jianzhong LI , Yan XU , Hao LU

Front. Struct. Civ. Eng. ›› 2011, Vol. 5 ›› Issue (4) : 496 -502.

PDF (185KB)
Front. Struct. Civ. Eng. ›› 2011, Vol. 5 ›› Issue (4) : 496 -502. DOI: 10.1007/s11709-011-0131-9
RESEARCH ARTICLE
RESEARCH ARTICLE

Higher-order mode effects on the seismic performance of tall piers

Author information +
History +
PDF (185KB)

Abstract

A comprehensive analysis was conducted to investigate the seismic performance of a typical tall bridge pier through incremental dynamical analysis (IDA). The effect of higher-order modes was studied specifically. The results showed that higher-order modes significantly contributed to the structural seismic response and should not be neglected. Including these modes resulted in an additional hinge midway up the pier. No plastic hinge would occur at this location for conventional bridge piers. Higher-order modes also led to an out-of-phase response between the hinge rotation at the pier bottom and the displacement at the top. This means that the displacement-based seismic design method cannot correctly predict the mechanical state of the critical hinge and therefore is not suitable for use in the seismic design of tall piers. Mistakenly using the displacement-based seismic design method for tall piers may result in a seriously unsafe condition.

Keywords

tall bridges / higher-order mode effects / incremental dynamic analysis

Cite this article

Download citation ▾
Zhongguo GUAN, Jianzhong LI, Yan XU, Hao LU. Higher-order mode effects on the seismic performance of tall piers. Front. Struct. Civ. Eng., 2011, 5(4): 496-502 DOI:10.1007/s11709-011-0131-9

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Kowalsky M J. Deformation limit states for circular reinforced concrete bridge column. Journal of Structural Engineering, 2000, 126(8): 869-878

[2]

Priestley M J N, Seible F, Calvi M. Seismic Design and Retrofit of Bridges. New York: John Wiley & Sons, 1996

[3]

JTG/T B02-01-2008. Guidelines for Seismic Design of Highway Bridges. Beijing: China Communications Press, 2008 (in Chinese)

[4]

AASHTO. AASHTO Guide Specification for LRFD Seismic Bridge Design, 2007

[5]

Ceravolo R, Demarie G V, Giordano L, Mancini G, Sabia D. Problems in applying code-specified capacity design procedures to seismic design of tall piers. Engineering Structures, 2009, 31(8): 1811-1821

[6]

Li J Z, Song X D, Fan L C. Investigation for displacement ductility capacity of tall piers. Earthquake Engineering and Engineering Vibration, 2005, 25(1): 43-48 (in Chinese)

[7]

Taucer F F, Enrico S F. Beam-column Model for Seismic Response Analysis of Reinforced Concrete Structures. <patent>EERC 91-17</patent> 1991

[8]

Vamvatsikos D, Cornell C A. Incremental dynamic analysis. Earthquake Engineering & Structural Dynamics, 2002, 31(3): 491-514

RIGHTS & PERMISSIONS

Higher Education Press and Springer-Verlag Berlin Heidelberg

AI Summary AI Mindmap
PDF (185KB)

2536

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/