Experimental study on pile-end post-grouting piles for super-large bridge pile foundations

Abstract

The application of pile-end post-grouting piles for super-large bridge pile foundations in some important projects was introduced in this paper. There are totally 21 test piles. The maximum pile diameter varies from 2.5 m to 3 m, and the maximum length is 125 m; the bearing capacity of the post-grouting piles is over ten thousands tons. Based on the test results, the bearing capacity, displacement, and bearing characteristic before and after grouting were analyzed. The results show that the bearing capacity of the piles are increased in different degrees after grouting although the technical parameters, including the patterns of grouting pipes, pressure, dosages of cement, duration of grouting lasting time, are different. However, the obtained values are very discrete. In addition, the calculation formula for the post-grouting piles under specified grouting condition was deduced based on the statistics analysis results of 57 test piles. The research results have been applied in the design of bridge foundation.

Keywords

self-balanced testing technique / pile-end post-grouting / bearing capacity / grouting technology

References

[1] Bruce D A. Enhancing the performance of large diameter piles by grouting. Ground Engineering, 1986, 19(4): 9-15

[2] Fellenius B H, Kulesza R, Hayes J. O-Cell testing and FE analysis of 28-m-deep barrette in Manila, Philippines. Journal of Geotechnical and Geoenvironmental Engineering, 1999, 125(7): 566-575

[3] Gong Weiming, Dai Guoliang, Jiang Yongsheng, Xue Guoya. Theory and practice of self-balanced loading test for pile bearing capacity. Journal of Building Structure, 2002, 23(1): 82-88 (in Chinese)

[4] Dai Guoliang, Gong Weiming, Cheng Ye. Application of self-balanced testing and post grouting to large diameter and super-long piles. Chinese Journal of Geotechnical Engineering, 2005, 27(6): 690-694 (in Chinese)

[5] The Professional Standards Compilation Group of People’s Republic of China. Specifications for Design of Groundsill and Foundation of Highway Bridges and Culverts (JTJ024–85). Beijing: China Communications Press, 1986 (in Chinese)

[6] The Professional Standards Compilation Group of People’s Republic of China. Technical Code for Building Pile Foundations (JGJ94 – 94). Beijing: China Architecture and Building Press, 1995 (in Chinese)

[7] The National Standards Compilation Group of People’s Republic of China. Fundamental Code for Design on Railway Bridge and Culvert (TBJ10002.5-2005). Beijing: China Railway Press, 2005 (in Chinese)

[8] The Professional Standards Compilation Group of People's Republic of China. Code for Design of Building Foundation (GB 50007-2002). Beijing: China Architecture and Building Press, 2002 (in Chinese)

RIGHTS & PERMISSIONS

Higher Education Press and Springer-Verlag Berlin Heidelberg