Construction of upconversion fluoride/attapulgite nanocomposite for visible-light-driven photocatalytic nitrogen fixation

Xuhua YE , Xiangyu YAN , Xini CHU , Shixiang ZUO , Wenjie LIU , Xiazhang LI , Chao YAO

Front. Mater. Sci. ›› 2020, Vol. 14 ›› Issue (4) : 469 -480.

PDF (1790KB)
Front. Mater. Sci. ›› 2020, Vol. 14 ›› Issue (4) : 469 -480. DOI: 10.1007/s11706-020-0524-6
RESEARCH ARTICLE
RESEARCH ARTICLE

Construction of upconversion fluoride/attapulgite nanocomposite for visible-light-driven photocatalytic nitrogen fixation

Author information +
History +
PDF (1790KB)

Abstract

Developing photocatalysts with wide spectrum absorption and strong nitrogen activation is critical for nitrogen fixation under mild conditions. Herein, one-dimensional natural clay attapulgite (ATP) supported YF3:Sm3+ were successfully synthesized via microwave hydrothermal method, and the composites were employed as the catalyst for photocatalytic nitrogen fixation under visible-light irradiation. Results indicated that the production of ammonia reached as high as 41.2 mg·L−1 within 3 h when the molar ratio of Sm3+ and the mass fraction of YF3:Sm3+ were optimized. The enhanced fixation performance is mainly due to that the modified ATP fibber with abundant active sites and the doped fluoride with defective vacancy facilitate the adsorption and activation of N2. Furthermore, the upconversion property of YF3:Sm3+ increases the harvesting of visible-light energy, meanwhile the Z-scheme heterostructure built between YF3:Sm3+ and modified ATP inhibits the recombination of charge carriers and retains high redox potentials for N2 reduction.

Keywords

photocatalysis / nitrogen fixation / attapulgite / upconversion / Z-scheme

Cite this article

Download citation ▾
Xuhua YE, Xiangyu YAN, Xini CHU, Shixiang ZUO, Wenjie LIU, Xiazhang LI, Chao YAO. Construction of upconversion fluoride/attapulgite nanocomposite for visible-light-driven photocatalytic nitrogen fixation. Front. Mater. Sci., 2020, 14(4): 469-480 DOI:10.1007/s11706-020-0524-6

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Kou J, Lu C, Wang J, . Selectivity enhancement in heterogeneous photocatalytic transformations. Chemical Reviews, 2017, 117(3): 1445–1514

[2]

Ding J, Zhong Q, Gu H. Iron-titanium dioxide composite nanoparticles prepared with an energy effective method for efficient visible-light-driven photocatalytic nitrogen reduction to ammonia. Journal of Alloys and Compounds, 2018, 746: 147–152

[3]

Ye L, Han C, Ma Z, . Ni2P loading on Cd0.5Zn0.5S solid solution for exceptional photocatalytic nitrogen fixation under visible light. Chemical Engineering Journal, 2017, 307: 311–318

[4]

Li R. Photocatalytic nitrogen fixation: An attractive approach for artificial photocatalysis. Chinese Journal of Catalysis, 2018, 39(7): 1180–1188

[5]

Ding J, Zhong Q, Gu H. Iron-titanium dioxide composite nanoparticles prepared with an energy effective method for efficient visible-light-driven photocatalytic nitrogen reduction to ammonia. Journal of Alloys and Compounds, 2018, 746: 147–152

[6]

Zhu D, Zhang L, Ruther R E, . Photo-illuminated diamond as a solid-state source of solvated electrons in water for nitrogen reduction. Nature Materials, 2013, 12(9): 836–841

[7]

Dong G, Ho W, Wang C. Selective photocatalytic N2 fixation dependent on g-C3N4 induced by nitrogen vacancies. Journal of Materials Chemistry A: Materials for Energy and Sustainability, 2015, 3(46): 23435–23441

[8]

Diarmand-Khalilabad H, Habibi-Yangjeh A, Seifzadeh D, . g-C3N4 nanosheets decorated with carbon dots and CdS nanoparticles: Novel nanocomposites with excellent nitrogen photofixation ability under simulated solar irradiation. Ceramics International, 2019, 45(2): 2542–2555

[9]

Xing P, Zhang W, Chen L, . Preparation of a NiO/KNbO3 nanocomposite via a photodeposition method and its superior performance in photocatalytic N2 fixation. Sustainable Energy & Fuels, 2020, 4(3): 1112–1117

[10]

Xing P, Wu S, Chen Y, . New application and excellent performance of Ag/KNbO3 nanocomposite in photocatalytic NH3 synthesis. ACS Sustainable Chemistry & Engineering, 2019, 7: 12408–12418

[11]

Hu S, Qu X, Bai J, . Effect of Cu(I)–N active sites on the N2 photofixation ability over flowerlike copper-doped g-C3N4 prepared via a novel molten salt-assisted microwave process: The experimental and density functional theory simulation analysis. ACS Sustainable Chemistry & Engineering, 2017, 5(8): 6863–6872

[12]

Hu S, Chen X, Li Q, . Fe3+ doping promoted N2 photofixation ability of honeycombed graphitic carbon nitride: The experimental and density functional theory simulation analysis. Applied Catalysis B: Environmental, 2017, 201: 58–69

[13]

Schrauzer G N, Guth T D. Photolysis of water and photoreduction of nitrogen on titanium dioxide. Journal of the American Chemical Society, 1977, 99(22): 7189–7193

[14]

Li H, Shang J, Ai Z, . Efficient visible light nitrogen fixation with BiOBr nanosheets of oxygen vacancies on the exposed {0 0 1} facets. Journal of the American Chemical Society, 2015, 137(19): 6393–6399

[15]

Zeng L, Zhe F, Wang Y, . Preparation of interstitial carbon doped BiOI for enhanced performance in photocatalytic nitrogen fixation and methyl orange degradation. Journal of Colloid and Interface Science, 2019, 539: 563–574

[16]

Gao X, Shang Y, Liu L, . Multilayer ultrathin Ag–d-Bi2O3 with ultrafast charge transformation for enhanced photocatalytic nitrogen fixation. Journal of Colloid and Interface Science, 2019, 533: 649–657

[17]

Hu S, Chen X, Li Q, . Effect of sulfur vacancies on the nitrogen photofixation performance of ternary metal sulfide photocatalysts. Catalysis Science & Technology, 2016, 6(15): 5884–5890

[18]

Li X, Yan X, Zuo S, . Construction of LaFe1−xMnxO3/attapulgite nanocomposite for photo-SCR of NOx at low temperature. Chemical Engineering Journal, 2017, 320: 211–221

[19]

Li X, Li F, Lu X, . Microwave hydrothermal synthesis of BiP1−xVxO4/attapulgite nanocomposite with efficient photocatalytic performance for deep desulfurization. Powder Technology, 2018, 327: 467–475

[20]

Li X, Zhu W, Lu X, . Integrated nanostructures of CeO2/attapulgite/g-C3N4 as efficient catalyst for photocatalytic desulfurization: Mechanism, kinetics and influencing factors. Chemical Engineering Journal, 2017, 326: 87–98

[21]

Zhang J, He R, Liu X. Efficient visible light driven photocatalytic hydrogen production from water using attapulgite clay sensitized by CdS nanoparticles. Nanotechnology, 2013, 24(50): 505401

[22]

Li X, Shi H, Wang T, . Photocatalytic removal of NO by Z-scheme mineral based heterojunction intermediated by carbon quantum dots. Applied Surface Science, 2018, 456: 835–844

[23]

Reddy K L, Kumar S, Kumar A, . Wide spectrum photocatalytic activity in lanthanide-doped upconversion nanophosphors coated with porous TiO2 and Ag–Cu bimetallic nanoparticles. Journal of Hazardous Materials, 2019, 367: 694–705

[24]

Wang W, Li Y, Kang Z, . A NIR-driven photocatalyst based on α-NaYF4:Yb,Tm@TiO2 core–shell structure supported on reduced graphene oxide. Applied Catalysis B: Environmental, 2016, 182: 184–192

[25]

Wang Z, Li X, Qian H, . Upconversion Tm3+:CeO2/palygorskite as direct Z-scheme heterostructure for photocatalytic degradation of bisphenol A. Journal of Photochemistry and Photobiology A: Chemistry, 2019, 372: 42–48

[26]

Tou M, Luo Z, Bai S, . Sequential coating upconversion NaYF4:Yb,Tm nanocrystals with SiO2 and ZnO layers for NIR-driven photocatalytic and antibacterial applications. Materials Science and Engineering C, 2017, 70(Pt 2): 1141–1148

[27]

Li X, Ma S, Qian H, . Upconversion nanocomposite CeO2:Tm3+/attapulgite intermediated by carbon quantum dots for photocatalytic desulfurization. Powder Technology, 2019, 351: 38–45

[28]

Wang Z, Li X, Qian H, . Upconversion Tm3+:CeO2/palygorskite as direct Z-scheme heterostructure for photocatalytic degradation of bisphenol A. Journal of Photochemistry and Photobiology A: Chemistry, 2019, 372: 42–48

[29]

Li X, He C, Zuo S, . Photocatalytic nitrogen fixation over fluoride/attapulgite nanocomposite: Effect of upconversion and fluorine vacancy. Solar Energy, 2019, 191: 251–262

[30]

Wu F, Li X, Zhang H, . Z-scheme photocatalyst constructed by natural attapulgite and upconversion rare earth materials for desulfurization. Frontiers in Chemistry, 2018, 6: 477

[31]

Ullah S, Ferreira-Neto E P, Hazra C, . Broad spectrum photocatalytic system based on BiVO4 and NaYbF4:Tm3+ upconversion particles for environmental remediation under UV-vis-NIR illumination. Applied Catalysis B: Environmental, 2019, 243: 121–135

[32]

Hussain S K, Giang T T H, Yu J S. UV excitation band induced novel Na3Gd(VO4)2:RE3+ (RE3+ = Eu3+ or Dy3+ or Sm3+) double vanadate phosphors for solid-state lightning applications. Journal of Alloys and Compounds, 2018, 739: 218–226

[33]

Rajesh N P, Subalakshmi G, Jayasankar C K. Investigations on energy transfer and tunable luminescence spectra for single, co-doped and tri-doped RE3+ (RE3+ = Dy3+, Sm3+ and Eu3+) activated Sr1.99Bi0.01CeO4 phosphors. Optical Materials, 2018, 85: 464–473

[34]

Li X, Wang X, Li X, . Luminescence studies of Sm3+ single-doped and Sm3+, Dy3+ co-doped NaGdTiO4 phosphors. Physica B: Condensed Matter, 2016, 481: 197–203

[35]

Chen G, Lei R, Huang F, . Optical temperature sensing behavior of Er3+/Yb3+/Tm3+:Y2O3 nanoparticles based on thermally and non-thermally coupled levels. Optics Communications, 2018, 407: 57–62

[36]

Silva F R O, Lima N B, Yoshito W K, . Development of novel upconversion luminescent nanoparticle of ytterbium/thulium-doped beta tricalcium phosphate. Journal of Luminescence, 2017, 187: 240–246

[37]

Oh J H, Moon B K, Choi B C, . The green upconversion emission mechanism investigation of GdVO4:Yb3+, Er3+ via tuning of the sensitizer concentration. Solid State Sciences, 2015, 42: 1–5

[38]

Zhang Y, Xu S, Li X, . Concentration quenching of blue upconversion luminescence in Tm3+/Yb3+ co-doped Gd2(WO4)3 phosphors under 980 and 808 nm excitation. Journal of Alloys and Compounds, 2017, 709: 147–157

[39]

Jia H, Zheng S H, Xu C, . Near-infrared light-induced photocurrent from a (NaYF4:Yb–Tm)/Cu2O composite thin film. Advanced Energy Materials, 2015, 5(2): 1401041

[40]

Zhu C, Zhou W, Fang J, . Improved upconversion efficiency and thermal stability of NaYF4@SiO2 photonic crystal film. Journal of Alloys and Compounds, 2018, 741: 337–347

[41]

Chen Z, Fu M L. Recyclable magnetic Fe3O4@SiO2/β-NaYF4:Yb3+,Tm3+/TiO2 composites with NIR enhanced photocatalytic activity. Materials Research Bulletin, 2018, 107: 194–203

[42]

Qin W, Zhang D, Zhao D, . Near-infrared photocatalysis based on YF3:Yb3+,Tm3+/TiO2 core/shell nanoparticles. Chemical Communications, 2010, 46(13): 2304–2306

[43]

Santos H D A, Novais S M V, Jacinto C. Optimizing the Nd:YF3 phosphor by impurities control in the synthesis procedure. Journal of Luminescence, 2018, 201: 156–162

[44]

Li X, Li F, Lu X, . Black phosphorus quantum dots/attapulgite nanocomposite with enhanced photocatalytic performance. Functional Materials Letters, 2017, 10(06): 1750078

[45]

Ding J, Dai Z, Qin F, . Z-scheme BiO1−xBr/Bi2O2CO3 photocatalyst with rich oxygen vacancy as electron mediator for highly efficient degradation of antibiotics. Applied Catalysis B: Environmental, 2017, 205: 281–291

[46]

Feng X, Chen H, Jiang F, . In-situ self-sacrificial fabrication of lanthanide hydroxycarbonates/graphitic carbon nitride heterojunctions: nitrogen photofixation under simulated solar light irradiation. Chemical Engineering Journal, 2018, 347: 849–859

[47]

Zhou N, Qiu P, Chen H, . KOH etching graphitic carbon nitride for simulated sunlight photocatalytic nitrogen fixation with cyano groups as defects. Journal of the Taiwan Institute of Chemical Engineers, 2018, 83: 99–106

[48]

Ma S, Li X, Lu X, . Carbon quantum dots/attapulgite nanocomposites with enhanced photocatalytic performance for desulfurization. Journal of Materials Science: Materials in Electronics, 2018, 29(4): 2709–2715

[49]

Li X, Zhang Z, Yao C, . Attapulgite–CeO2/MoS2 ternary nanocomposite for photocatalytic oxidative desulfurization. Applied Surface Science, 2016, 364: 589–596

[50]

Payrer E L, Almeida R M, Jimenez C, . Growth of lanthanide-doped YF3 thin films by pulsed liquid injection MOCVD: Influence of deposition parameters on film microstructure. Surface and Coatings Technology, 2013, 230: 22–27

[51]

Ansari A A, Yadav R, Rai S B. Enhanced luminescence efficiency of aqueous dispersible NaYF4:Yb/Er nanoparticles and the effect of surface coating. RSC Advances, 2016, 6(26): 22074–22082

[52]

He Y, Dai X, Ma S, . Hydrothermal preparation of carbon modified KNb3O8 nanosheets for efficient photocatalytic H2 evolution. Ceramics International, 2020, 46(8): 11421–11426

[53]

Xu C, Qiu P, Li L, . Bismuth subcarbonate with designer defects for broad-spectrum photocatalytic nitrogen fixation. ACS Applied Materials & Interfaces, 2018, 10(30): 25321–25328

[54]

Zhao Z, Hong S, Yan C, . Efficient visible-light driven N2 fixation over two-dimensional Sb/TiO2 composites. Chemical Communications, 2019, 55(50): 7171–7174

[55]

Zhu B, Xia P, Li Y, . Fabrication and photocatalytic activity enhanced mechanism of direct Z-scheme g-C3N4/Ag2WO4 photocatalyst. Applied Surface Science, 2017, 391: 175–183

RIGHTS & PERMISSIONS

Higher Education Press

AI Summary AI Mindmap
PDF (1790KB)

1109

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/