FeS₂@C nanorods embedded in three-dimensional graphene as high-performance anode for sodium-ion batteries

Abstract

FeS₂ has drawn tremendous attention as electrode material for sodium-ion batteries (SIBs) due to its high theoretical capacity and abundant resources. However, it suffers from severe volume expansion and dull reaction kinetics during the cycling process, leading to poor rate capacity and short cyclability. Herein, a well-designed FeS₂@C/G composite constructed by FeS₂ nanoparticles embedded in porous carbon nanorods (FeS₂@C) and covered by three-dimensional (3D) graphene is reported. FeS₂ nanoparticles can shorten the Na⁺ diffusion distance during the sodiation–desodiation process. Porous carbon nanorods and 3D graphene not only improve conductivity but also provide double protection to alleviate the volume variation of FeS₂ during cycling. Consequently, FeS₂@C/G exhibits excellent cyclability (83.3% capacity retention after 300 cycles at 0.5 A·g⁻¹ with a capacity of 615.1 mA·h·g⁻¹) and high rate capacity (475.1 mA·h·g⁻¹ at 5 A·g⁻¹ after 2000 cycles). The pseudocapacitive process is evaluated and confirmed to significantly contribute to the high rate capacity of FeS₂@C/G.

Keywords

FeS ₂ / electrode material / sodium-ion battery / nanoparticles / graphene

References

[1] Wang X, Wang W, Zhu B, . Mo-doped Na₃V₂(PO₄)₃@C composites for high stable sodium ion battery cathode. Frontiers of Materials Science, 2018, 12(1): 53–63

[2] Goodenough J B. Electrochemical energy storage in a sustainable modern society. Energy & Environmental Science, 2014, 7(1): 14–18

[3] Jia Y, Ma Z, Li Z, . Electrochemical performances of NiO/Ni₂N nanocomposite thin film as anode material for lithium ion batteries. Frontiers of Materials Science, 2019, 13(4): 367–374

[4] Dunn B, Kamath H, Tarascon J M. Electrical energy storage for the grid: a battery of choices. Science, 2011, 334(6058): 928–935

[5] Zhu Y, You J, Huang H, . Facile synthesis and electrochemical properties of layered Li[Ni_1/3Mn_1/3Co_1/3]O₂ as cathode materials for lithium-ion batteries. Frontiers of Materials Science, 2017, 11(2): 155–161

[6] Slater M D, Kim D, Lee E, . Sodium-ion batteries. Advanced Functional Materials, 2013, 23(8): 947–958

[7] Hou H, Qiu X, Wei W, . Carbon anode materials for advanced sodium-ion batteries. Advanced Energy Materials, 2017, 7(24): 1602898

[8] Fang Y, Chen Z, Xiao L, . Recent progress in iron-based electrode materials for grid-scale sodium-ion batteries. Small, 2018, 14(9): 1703116

[9] Liang Z, Huo R, Yin S, . Eco-efficient synthesis route of carbon-encapsulated transition metal phosphide with improved cycle stability for lithium-ion batteries. Journal of Materials Chemistry A: Materials for Energy and Sustainability, 2014, 2(4): 921–925

[10] Kim J K, Park S K, Park J S, . Uniquely structured composite microspheres of metal sulfides and carbon with cubic nanorooms for highly efficient anode materials for sodium-ion batteries. Journal of Materials Chemistry A: Materials for Energy and Sustainability, 2019, 7(6): 2636–2645

[11] Zou G, Hou H, Ge P, . Metal–organic framework-derived materials for sodium energy storage. Small, 2018, 14(3): 1702648

[12] Lin Y, Qiu Z, Li D, . NiS₂@CoS₂ nanocrystals encapsulated in N-doped carbon nanocubes for high performance lithium/sodium ion batteries. Energy Storage Mater., 2018, 11: 67–74

[13] Chen Z, Li S, Zhao Y, . Ultrafine FeS₂ nanocrystals/porous nitrogen-doped carbon hybrid nanospheres encapsulated in three-dimensional graphene for simultaneous efficient lithium and sodium ion storage. Journal of Materials Chemistry A: Materials for Energy and Sustainability, 2019, 7(46): 26342–26350

[14] Xu X, Zhao R, Ai W, . Controllable design of MoS₂ nanosheets anchored on nitrogen-doped graphene: toward fast sodium storage by tunable pseudocapacitance. Advanced Materials, 2018, 30(27): 1800658

[15] Bu F, Xiao P, Chen J, . Rational design of three-dimensional graphene encapsulated core–shell FeS@carbon nanocomposite as a flexible high-performance anode for sodium-ion batteries. Journal of Materials Chemistry A: Materials for Energy and Sustainability, 2018, 6(15): 6414–6421

[16] Walter M, Zund T, Kovalenko M V. Pyrite (FeS₂) nanocrystals as inexpensive high-performance lithium-ion cathode and sodium-ion anode materials. Nanoscale, 2015, 7(20): 9158–9163

[17] Zhu Y, Fan X, Suo L, . Electrospun FeS₂@carbon fiber electrode as a high energy density cathode for rechargeable lithium batteries. ACS Nano, 2016, 10(1): 1529–1538

[18] Shao M, Cheng Y, Zhang T, . Designing MOFs-derived FeS₂@carbon composites for high-rate sodium ion storage with capacitive contributions. ACS Applied Materials & Interfaces, 2018, 10(39): 33097–33104

[19] Douglas A, Carter R, Oakes L, . Ultrafine iron pyrite (FeS₂) nanocrystals improve sodium–sulfur and lithium–sulfur conversion reactions for efficient batteries. ACS Nano, 2015, 9(11): 11156–11165

[20] Chen W, Qi S, Guan L, . Pyrite FeS₂ microspheres anchoring on reduced graphene oxide aerogel as an enhanced electrode material for sodium-ion batteries. Journal of Materials Chemistry A: Materials for Energy and Sustainability, 2017, 5(11): 5332–5341

[21] Liu Z, Lu T, Song T, . Structure-designed synthesis of FeS₂@C yolk–shell nanoboxes as a high-performance anode for sodium-ion batteries. Energy & Environmental Science, 2017, 10(7): 1576–1580

[22] Liu R, Zhang N, Wang X, . SnO₂ nanoparticles anchored on graphene oxide as advanced anode materials for high-performance lithium-ion batteries. Frontiers of Materials Science, 2019, 13(2): 186–192

[23] Lu Z, Zhai Y, Wang N, . FeS₂ nanoparticles embedded in N/S co-doped porous carbon fibers as anode for sodium-ion batteries. Chemical Engineering Journal, 2020, 380: 122455

[24] Xia Y, Wang B, Wang G, . MOF-derived porous Ni_xFe_3−xO₄ nanotubes with excellent performance in lithium-ion batteries. ChemElectroChem, 2016, 3(2): 299–308

[25] Cho J S, Park J S, Kang Y C. Porous FeS nanofibers with numerous nanovoids obtained by Kirkendall diffusion effect for use as anode materials for sodium-ion batteries. Nano Research, 2017, 10(3): 897–907

[26] Wu R, Qian X, Rui X, . Zeolitic imidazolate framework 67-derived high symmetric porous Co₃O₄ hollow dodecahedra with highly enhanced lithium storage capability. Small, 2014, 10(10): 1932–1938

[27] Wu R, Qian X, Zhou K, . Porous spinel Zn_xCo_3−xO₄ hollow polyhedra templated for high-rate lithium-ion batteries. ACS Nano, 2014, 8(6): 6297–6303

[28] Zhao Y, Wang J, Ma C, . Interconnected graphene nanosheets with confined FeS₂/FeS binary nanoparticles as anode material of sodium-ion batteries. Chemical Engineering Journal, 2019, 378: 122168

[29] Chen B, Meng Y, Xie F, . 1D sub-nanotubes with anatase/bronze TiO₂ nanocrystal wall for high-rate and long-life sodium-ion batteries. Advanced Materials, 2018, 30(46): 1804116

[30] Chao D, Zhu C, Yang P, . Array of nanosheets render ultrafast and high-capacity Na-ion storage by tunable pseudocapacitance. Nature Communications, 2016, 7(1): 12122

[31] Sourisseau C, Cavagnat R, Fouassier M J. The vibrational properties and valence force fields of FeS₂, RuS₂ pyrites and FeS₂ marcasite. Physics and Chemistry of Solids, 1991, 52(3): 537–544

[32] Chen K, Zhang W, Xue L, . Mechanism of capacity fade in sodium storage and the strategies of improvement for FeS₂ anode. ACS Applied Materials & Interfaces, 2017, 9(2): 1536–1541

[33] Hu Z, Zhu Z, Cheng F, . Pyrite FeS₂ for high-rate and long-life rechargeable sodium batteries. Energy & Environmental Science, 2015, 8(4): 1309–1316

[34] Shadike Z, Zhou Y N, Ding F, . The new electrochemical reaction mechanism of Na/FeS₂ cell at ambient temperature. Journal of Power Sources, 2014, 260: 72–76

[35] Yao Q, Zhang J, Shi X, . Rational synthesis of two-dimensional G@porous FeS₂@C composite as high-rate anode materials for sodium/potassium ion batteries. Electrochimica Acta, 2019, 307: 118–128

[36] Wang N, Xu X, Liao T, . Boosting sodium storage of double-shell sodium titanate microspheres constructed from 2D ultrathin nanosheets via sulfur doping. Advanced Materials, 2018, 30(49): 1804157

[37] Zhao Y, Wang J, Ma C, . Interconnected graphene nanosheets with confined FeS₂/FeS binary nanoparticles as anode material of sodium-ion batteries. Chemical Engineering Journal, 2019, 378: 122168

[38] Ren X, Wang J, Zhu D, . Sn−C bonding riveted SnSe nanoplates vertically grown on nitrogen-doped carbon nanobelts for high-performance sodium-ion battery anodes. Nano Energy, 2018, 54: 322–330

[39] Shi H, Fang Z, Zhang X, . Double-network nanostructured hydrogel-derived ultrafine Sn–Fe alloy in three-dimensional carbon framework for enhanced lithium storage. Nano Letters, 2018, 18(5): 3193–3198

[40] Lu Z, Wang N, Zhang Y, . Metal–organic framework-derived sea-cucumber-like FeS₂@C nanorods with outstanding pseudocapacitive Na-ion storage properties. ACS Applied Energy Materials, 2018, 1(11): 6234–6241

[41] Wu C, Maier J, Yu Y. Generalizable synthesis of metal-sulfides/carbon hybrids with multiscale, hierarchically ordered structures as advanced electrodes for lithium storage. Advanced Materials, 2016, 28(1): 174–180

[42] Lu Z, Wang N, Zhang Y, . Pyrite FeS₂@C nanorods as smart cathode for sodium ion battery with ultra-long lifespan and notable rate performance from tunable pseudocapacitance. Electrochimica Acta, 2018, 260: 755–761

[43] Wu X, Guo J, McDonald M J, . Synthesis and characterization of urchin-like Mn_0.33Co_0.67C₂O₄ for Li-ion batteries: Role of SEI layers for enhanced electrochemical properties. Electrochimica Acta, 2015, 163: 93–101

[44] Muller G A, Cook J B, Kim H S, . High performance pseudocapacitor based on 2D layered metal chalcogenide nanocrystals. Nano Letters, 2015, 15(3): 1911–1917

[45] Brezesinski T, Wang J, Tolbert S H, . Ordered mesoporous α-MoO₃ with iso-oriented nanocrystalline walls for thin-film pseudocapacitors. Nature Materials, 2010, 9(2): 146–151

[46] Kim H S, Cook J B, Lin H, . Oxygen vacancies enhance pseudocapacitive charge storage properties of MoO_3−x. Nature Materials, 2017, 16(4): 454–460

RIGHTS & PERMISSIONS

Higher Education Press