One-step electrochemical fabrication of bilayered MgO/polymer coating on magnesium alloy

Abstract

This research demonstrates a novel one-step electrochemical method to fabricate thick bilayer coatings on magnesium alloy in acid phosphate electrolyte containing aniline monomer and styrene-acrylic emulsion (SAE) with pulsed DC voltage. The morphologies, XRD and FTIR results show that the bilayer coating consists of an inner oxide layer and an outer polyaniline (PANI)/SAE composite layer. It is believed that the bilayered structure achieved results from a hybrid process combining electropolymerization (EPM) of aniline, electrophoretic deposition (EPD) of SAE and plasma electrolyte oxidation (PEO) of magnesium alloy substrate. Electrochemical corrosion tests indicate that the bilayer coating can provide superior corrosion protection to the magnesium alloy substrate in 3.5 wt.% NaCl solution.

Keywords

magnesium alloy / bilayer coating / EPD / PEO / corrosion resistance

References

[1] Eliezer D, Aghion E, Froes F H. Magnesium science, technology and applications. Advanced Performance Materials, 1998, 5(3): 201–212

[2] Mordike B L, Ebert T. Magnesium: properties – applications – potential. Materials Science and Engineering A, 2001, 302(1): 37–45

[3] Song G L, Atrens A. Corrosion mechanisms of magnesium alloys. Advanced Engineering Materials, 1999, 1(1): 11–33

[4] Kainer K U, Srinivasan P B, Blawert C, . Corrosion of Magnesium and Its Alloys. Oxford: Elsevier, 2010

[5] Gray J E, Luan B. Protective coatings on magnesium and its alloys — a critical review. Journal of Alloys and Compounds, 2002, 336(1–2): 88–113

[6] Singh R. Surface modification for mitigation of corrosion/localised corrosion of magnesium alloys. Surface Engineering, 2007, 23(5): 319–323

[7] Blawert C, Dietzel W, Ghali E, . Anodizing treatments for magnesium alloys and their effect on corrosion resistance in various environments. Advanced Engineering Materials, 2006, 8(6): 511–533

[8] Walsh F C, Low C T J, Wood R J K, . Plasma electrolytic oxidation (PEO) for production of anodised coatings on lightweight metal (Al, Mg, Ti) alloys. Transactions of the Institute of Metal Finishing, 2009, 87(3): 122–135

[9] Song G L. An irreversible dipping sealing technique for anodized ZE41 Mg alloy. Surface and Coatings Technology, 2009, 203(23): 3618–3625

[10] Duan H P, Du K Q, Yan C W, . Electrochemical corrosion behavior of composite coatings of sealed MAO film on magnesium alloy AZ91D. Electrochimica Acta, 2006, 51(14): 2898–2908

[11] Srinivasan P B, Scharnagl N, Blawert C, . Enhanced corrosion protection of AZ31 magnesium alloy by duplex plasma electrolytic oxidation and polymer coatings. Surface Engineering, 2010, 26(5): 354–360

[12] Guo X H, An M Z. Experimental study of electrochemical corrosion behaviour of bilayer on AZ31B Mg alloy. Corrosion Science, 2010, 52(12): 4017–4027

[13] Lamaka S V, Knornschild G, Snihirova D V, . Complex anticorrosion coating for ZK30 magnesium alloy. Electrochimica Acta, 2009, 55(1): 131–141

[14] Bestetti M, Cavallotti P L, Da Forno A, . Anodic oxidation and powder coating for corrosion protection of AM60B magnesium alloys. Transactions of the IMF, 2007, 85(6): 316–319

[15] Mandelli A, Bestetti M, Da Forno A, . A composite coating for corrosion protection of AM60B magnesium alloy. Surface and Coatings Technology, 2011, 205(19): 4459–4465

[16] Bai K F, Zhang Y, Fu Z Y, . Fabrication of chitosan/magnesium phosphate composite coating and the in vitro degradation properties of coated magnesium alloy. Materials Letters, 2012, 73: 59–61

[17] Wu C J, Wen Z H, Dai C S, . Fabrication of calcium phosphate/chitosan coatings on AZ91D magnesium alloy with a novel method. Surface and Coatings Technology, 2010, 204(20): 3336–3347

[18] Jiang Y F, Yang H S, Bao Y F, . Characterization of composite coatings produced by plasma electrolytic oxidation plus cathodic electrophoretic deposition on magnesium alloy. Advanced Materials Research, 2011, 146–147: 1126–1131

[19] Shang W, Chen B Z, Shi X C, . Electrochemical corrosion behavior of composite MAO/sol–gel coatings on magnesium alloy AZ91D using combined micro-arc oxidation and sol–gel technique. Journal of Alloys and Compounds, 2009, 474(1–2): 541–545

[20] Wang J W, Tang J W, He Y D. Top coating of low-molecular weight polymer MALPB used for enhanced protection on anodized AZ31B Mg alloys. Journal of Coatings Technology and Research, 2010, 7(6): 737–746

[21] Sathiyanarayanan S, Maruthan K, Muthukrishnan S, . High performance polyaniline containing coating system for wet surfaces. Progress in Organic Coatings, 2009, 66(2): 113–117

[22] Yuan D S, Zhou T X, Zhou S L, . Nitrogen-enriched carbon nanowires from the direct carbonization of polyaniline nanowires and its electrochemical properties. Electrochemistry Communications, 2011, 13(3): 242–246

[23] Bhadra S, Khastgir D, Singha N K, . Progress in preparation, processing and applications of polyaniline. Progress in Polymer Science, 2009, 34(8): 783–810

[24] Zhang R H, Liang J, Wang Q. Preparation and characterization of graphite-dispersed styrene-acrylic emulsion composite coating on magnesium alloy. Applied Surface Science, 2012, 258(10): 4360–4364

[25] Sathiyanarayanan S, Muthkrishnan S, Venkatachari G. Corrosion protection of steel by polyaniline blended coating. Electrochimica Acta, 2006, 51(28): 6313–6319

[26] Conroy K G, Breslin C B. The electrochemical deposition of polyaniline at pure aluminium: electrochemical activity and corrosion protection properties. Electrochimica Acta, 2003, 48(6): 721–732

[27] Shao Y W, Huang H, Zhang T, . Corrosion protection of Mg–5Li alloy with epoxy coatings containing polyaniline. Corrosion Science, 2009, 51(12): 2906–2915

RIGHTS & PERMISSIONS

Higher Education Press and Springer-Verlag Berlin Heidelberg