Influence of dicalcium phosphate dihydrate coating on the in vitro degradation of Mg-Zn alloy

Abstract

To reduce the degradation rate and further to improve the biocompatibility of magnesium alloy, dicalcium phosphate dihydrate (CaHPO₄·2H₂O, DCPD) has been fabricated on a kind of magnesium-zinc alloy by way of electrodeposition method. The experimental results of XRD, SEM and EDS showed that the electrodeposited coating on the Mg-Zn alloy mainly contains the flake-like DCPD, along with some octacalcium phosphate (Ca₈(HPO₄)₂(PO₄)₄·4H₂O, OCP). After the in vitro degradation of the coated alloy in modified-simulated body fluid (m-SBF), it was proved that the coating could reduce the degradation rate effectively, and the samples were covered by calcium phosphate salts with a higher Ca/P ratio. Therefore, it indicates that compared with the bare alloy, the DCPD coating rendered a more biocompatible surface, and is a promising coating candidate for biomedical magnesium materials.

Keywords

biodegradable / magnesium / corrosion / coating / DCPD