The two cycle dynamical results, such as the bearing load, the piston thrust, and the load spatial distribution etc., were obtained by hybrid dynamical simulation of the flexible assembly of the block and crank-train. The finite element model of the block was validated by modal test. The frequency response of the block was calculated using the finite element method (FEM). Finally, the radiated noise such as sound power level and efficiency in the out sound field were obtained using the direct boundary element method (BEM).
GUO Lei, HAO Zhiyong, XU Hongmei, LIU Lianyun
. Integrated virtual-design methods for forecasting
radiated noise of single cylinder diesel block[J]. Frontiers in Energy, 2008
, 2(4)
: 416
-421
.
DOI: 10.1007/s11708-008-0097-z
1. Ma D Y . Noise Control Manual. Beijing: Science Press, 2000 (in Chinese)
2. Hao Z Y . Crank-train dynamical performance simulation and experimental analysis. Internal Combustion Engine Engineering, 2006, 27(1): 38–40 (in Chinese)
3. Zhang G Q . Crankshaft fatigue assessment based on the FEM and MBD analysis. Internal Combustion Engine Engineering, 2006, 27(1): 41–44 (in Chinese)
4. Zhang J H . Vibration and noise of internal combustion engine characteristicsanalysis by using MBD method. China MechanicalEngineering, 2006, 17(1): 25–28 (in Chinese)
5. Cui Z Q . Dynamical performance analysis on the connecting interface of thecomplex structure. Journal of Huabei Collegeof Engineering, 2001, 22(3): 180–182 (in Chinese)
6. Liu Y H . Engine noise source identification with different methods. Transactions of Tianjin University, 2002, 8(3): 174–177
