Review on thermal-science fundamental research of pressurized oxy-fuel combustion technology
Received date: 07 Oct 2023
Accepted date: 06 Dec 2023
Copyright
As the next-generation oxy-fuel combustion technology for controlling CO2 emissions, pressurized oxy-fuel combustion (POC) technology can further reduce system energy consumption and improve system efficiency compared with atmospheric oxy-fuel combustion. The oxy-fuel combustion causes high CO2 concentration, which has a series of effects on the combustion reaction process, making the radiation and reaction characteristics different from air-fuel conditions. Under the pressurized oxy-fuel condition, the combustion reaction characteristics are affected by the coupling effect of pressure and atmosphere. The radiation and heat transfer characteristics of the combustion medium are also affected by pressure. In recent years, there have been many studies on POC. This review pays attention to the thermal-science fundamental research. It summarizes several typical POC systems in the world from the perspective of system thermodynamic construction. Moreover, it reviews, in detail, the current research results of POC in terms of heat transfer characteristics (radiant heat transfer and convective heat transfer), combustion characteristics, and pollutant emissions, among which the radiation heat transfer and thermal radiation model are the focus of this paper. Furthermore, it discusses the development and research direction of POC technology. It aims to provide references for scientific research and industrial application of POC technology.
Xinran Wang , Shiquan Shan , Zhihua Wang , Zhijun Zhou , Kefa Cen . Review on thermal-science fundamental research of pressurized oxy-fuel combustion technology[J]. Frontiers in Energy, . DOI: 10.1007/s11708-024-0931-y
1 |
Liu Z, Deng Z, He G.
|
2 |
Ma Q, Wang S, Fu Y.
|
3 |
Zheng Y, Gao L, He S.
|
4 |
ShanS, Chen B, ZhouZ, et al. A review on fundamental research of oxy-coal combustion technology. Thermal Science, 2022, 26(2 Part C): 1945–1958
|
5 |
Zhou Z, You Z, Wang Z.
|
6 |
Huang Z, Zhu L, Li A.
|
7 |
Haryanto A, Hong K S. Modeling and simulation of an oxy-fuel combustion boiler system with flue gas recirculation. Computers & Chemical Engineering, 2011, 35(1): 25–40
|
8 |
Dobó Z, Backman M, Whitty K J. Experimental study and demonstration of pilot-scale oxy-coal combustion at elevated temperatures and pressures. Applied Energy, 2019, 252: 113450
|
9 |
Hong J, Chaudhry G, Brisson J G.
|
10 |
Yadav S, Mondal S S. A review on the progress and prospects of oxy-fuel carbon capture and sequestration (CCS) technology. Fuel, 2022, 308: 308
|
11 |
Nakod P, Krishnamoorthy G, Sami M.
|
12 |
Kez V, Liu F, Consalvi J L.
|
13 |
Rahman Z, Wang X, Zhang J.
|
14 |
Jackson A J B, Audus H, Singh R. Gas turbine engine configurations for power generation cycles having CO2 sequestration. Proceedings of the Institution of Mechanical Engineers. Part A, Journal of Power and Energy, 2004, 218(1): 1–13
|
15 |
Richards G A, Casleton K H, Chorpening B T. CO2 and H2O diluted oxy-fuel combustion for zero-emission power. Proceedings of the Institution of Mechanical Engineers. Part A, Journal of Power and Energy, 2005, 219(2): 121–126
|
16 |
Williams T C, Shaddix C R, Schefer R W.
|
17 |
ZhengL, Pomalis R, ClementsB. Technical and Economic Feasibility Study of a Pressurized Oxy-Fuel Approach to Carbon Capture: Part 1: Technical Feasibility Study and Comparison of the Thermoenergy Integrated Power System (TIPS) with a Conventional Power Plant and Other Car-Bon Capture Processes. Technical Report CA1006424. 2007
|
18 |
MalavasiM, Rossetti E. Method and plant for the treatment of materials, in particular waste materials and refuse. US Patent, 9 557 052. 2017-1-31
|
19 |
YangT, Hunt P, LisauskasR, et al. Pressurized oxy-combustion carbon capture power system. In: The 35th International Technical Conference on Clean Coal & Fuel Systems. Florida: American Public Power Association, 2010
|
20 |
Deng S, Hynes R. Thermodynamic analysis and comparison on oxy-fuel power generation process. Journal of Engineering for Gas Turbines and Power, 2009, 131(5): 053001
|
21 |
Gazzino M, Benelli G. Pressurised oxy-coal combustion Rankine-cycle for future zero emission power plants: Process design and energy analysis. Energy Sustainability., 2008, 43208: 269–278
|
22 |
Gazzino M, Riccio G, Rossi N.
|
23 |
Hong J, Ghoniem A F, Field R.
|
24 |
Hong J, Field R, Gazzino M.
|
25 |
SchmittJ, Ridens B, MalavasiM. System modelling of a 50 MWth demonstration flameless pressurized oxy-combustion pilot plant. SSRN Electronic Journal, 2019, doi: 10.2139/ssrn.3365705
|
26 |
SchmittJ, Leutloff M, HillsH, et al. Flameless Pressurized Oxy-combustion Large Pilot Design, Construction, and Operation (Final Technical Report). Southwest Research Institute Technical Report DOE-SWRI-FE31580-1. 2022
|
27 |
SchmittJ, Malavasi M. Development of a 25 MWth flameless pressurized oxy-combustion pilot. In: Turbo Expo: Power for Land, Sea, and Air. Online: ASME, 2021, GT2021-60120, V006T03A016
|
28 |
SchmittJ. Pre-project planning for a flameless pressurized oxy-combustion (FPO) pilot plant. In: 2017 NETL CO2 Capture Technology Project Review Meeting. Pittsburg: NETL, 2017
|
29 |
SchmittJ, Malavasi M, MaxsonA, et al. Pre-Project Planning for a Flameless Pressurized Oxy-Combustion Pilot Plant: Final Technical Report. Southwest Research Institute Technical Report DOE-SwRI-27771-2. 2019
|
30 |
Shi Y, Zhong W, Shao Y.
|
31 |
Gopan A, Kumfer B M, Phillips J.
|
32 |
HumeS, Axelbaum R, YangZ, et al. Performance and flexibility improvements of staged pressurized oxy-combustion. In: Proceedings of the 15th Greenhouse Gas Control Technologies Conference. Abu Dhabi: SSRN, 2021, 15–18
|
33 |
Gopan A, Kumfer B M, Axelbaum R L. Effect of operating pressure and fuel moisture on net plant efficiency of a staged, pressurized oxy-combustion power plant. International Journal of Greenhouse Gas Control, 2015, 39: 390–396
|
34 |
Aneke M, Wang M. Process analysis of pressurized oxy-coal power cycle for carbon capture application integrated with liquid air power generation and binary cycle engines. Applied Energy, 2015, 154: 556–566
|
35 |
Ströhle J, Orth M, Epple B. Design and operation of a 1 MWth chemical looping plant. Applied Energy, 2014, 113: 1490–1495
|
36 |
ZanH, ChenX, LuiD, et al. Experimental research on oxygen-enriched combustion at 100 kWth pressurized circulating fluidized bed. Journal of China Coal Society, 2022, 47(10): 3822 (in Chinese)
|
37 |
Li H, Li S, Ren Q.
|
38 |
Li S, Li W, Xu M.
|
39 |
Li W, Li S, Ren Q.
|
40 |
Li S, Li H, Li W.
|
41 |
As K Z, Salvador C, Beigzadeh A. G2 technology for production of power, water or steam and pipeline-ready pressurized CO2. In: 5th Oxyfuel Combustion Research Network Meeting. Wuhan: CanmetENERGY, 2015
|
42 |
CanmetENERGY Ottawa Research Centre. Post-combustion CO2 capture processes and transformative supercritical CO2 power cycles. 2023-1-1, available at website of Government of Canada
|
43 |
Shi Y, Zhong W, Shao Y.
|
44 |
Farooqui A, Bose A, Ferrero D.
|
45 |
ModestM F. Radiative Heat Transfer. Amsterdam: Elsevier, 2013
|
46 |
Niu Z, Qi H, Gao B.
|
47 |
Mishra S C, Roy H K. Solving transient conduction and radiation heat transfer problems using the lattice Boltzmann method and the finite volume method. Journal of Computational Physics, 2007, 223(1): 89–107
|
48 |
Razzaque M M, Howell J R, Klein D E. Coupled radiative and conductive heat transfer in a two-dimensional rectangular enclosure with gray participating media using finite elements. Journal of Heat Transfer, 1984, 106(3): 613–619
|
49 |
Wang C H, Feng Y Y, Yue K.
|
50 |
Stamnes K, Tsay S C, Wiscombe W.
|
51 |
Sakami M, Charette A, Le Dez V. Application of the discrete ordinates method to combined conductive and radiative heat transfer in a two-dimensional complex geometry. Journal of Quantitative Spectroscopy & Radiative Transfer, 1996, 56(4): 517–533
|
52 |
Paul M C. Performance of the various Sn approximations of DOM in a 3D combustion chamber. Journal of Heat Transfer, 2008, 130(7): 072701
|
53 |
Chu H, Gu M, Consalvi J L.
|
54 |
DuX, ChenM, LiuL, et al. Effect of furnace pressure on thermal parameters of booster boiler. Journal of Engineering for Thermal Energy and Power, 2010, 25(06): 635–638+687 (in Chinese)
|
55 |
MiC, YanW. A wide band correlated-k distribution model for the gas radiative property under pressurized oxygen-enriched combustion. Proceedings of the CSEE, 2010, 30(29): 62–68 (in Chinese)
|
56 |
Gao Z, Xia R, Yan W.
|
57 |
Modest M F. The treatment of nongray properties in radiative heat transfer: From past to present. Journal of Heat Transfer, 2013, 135(6): 061801
|
58 |
Rothman L S, Gordon I E, Barber R J.
|
59 |
Goutiere V, Liu F, Charette A. An assessment of real-gas modelling in 2D enclosures. Journal of Quantitative Spectroscopy & Radiative Transfer, 2000, 64(3): 299–326
|
60 |
Chu H, Liu F, Zhou H. Calculations of gas thermal radiation transfer in one-dimensional planar enclosure using LBL and SNB models. International Journal of Heat and Mass Transfer, 2011, 54(21–22): 4736–4745
|
61 |
Xia F, Yang Z, Adeosun A.
|
62 |
Denison M K, Webb B W. A spectral line-based weighted-sum-of-gray-gases model for arbitrary RTE solvers. Journal of Heat and Mass Transfer, 1993, 115: 1004–1012
|
63 |
Modest M F, Zhang H. The full-spectrum correlated-k distribution for thermal radiation from molecular gas-particulate mixtures. Journal of Heat Transfer, 2002, 124(1): 30–38
|
64 |
Wang C, He B, Modest M F.
|
65 |
Chu H, Liu F, Zhou H. Calculations of gas radiation heat transfer in a two-dimensional rectangular enclosure using the line-by-line approach and the statistical narrow-band correlated-k model. International Journal of Thermal Sciences, 2012, 59: 66–74
|
66 |
Chu H, Consalvi J L, Gu M.
|
67 |
Chu H, Gu M, Consalvi J L.
|
68 |
Qi C, Zheng S, Zhou H. Calculations of thermal radiation transfer of C2H2 and C2H4 together with H2O, CO2, and CO in a one-dimensional enclosure using LBL and SNB models. Journal of Quantitative Spectroscopy & Radiative Transfer, 2017, 197: 45–50
|
69 |
ZhaoJ, Zhou H, CenK. Radiation characteristics of syngas in radiation waste heat boiler at high temperature and high pressure. Journal of Zhejiang University (Engineering Science), 2010, 44(09): 1781–1786 (in Chinese)
|
70 |
LiH, YanW, SunJ, et al. Analysis and calculation on radiative heat transfer of flue gas at high pressure and carbon dioxide concentration. Journal of Xi’an Jiaotong University, 2011, 45(5) 17–22 (in Chinese)
|
71 |
ModestM F, Haworth D C. Radiative heat transfer in high-pressure combustion systems. In: Michael F. Modest M F, Haworth D C, eds. Radiative Heat Transfer in Turbulent Combustion Systems. Cham: Springer, 2016, 137–148
|
72 |
Shan S, Zhou Z, Chen L.
|
73 |
Shan S, Qian B, Zhou Z.
|
74 |
Coelho F R, França F H R. WSGG correlations based on HITEMP2010 for gas mixtures of H2O and CO2 in high total pressure conditions. International Journal of Heat and Mass Transfer, 2018, 127: 105–114
|
75 |
Guo J, Shen L, Wan J.
|
76 |
Pal G, Modest M F. k-Distribution methods for radiation calculations in high-pressure combustion. Journal of Thermophysics and Heat Transfer, 2013, 27(3): 584–587
|
77 |
Pearson J T, Webb B W, Solovjov V P.
|
78 |
Pearson J T, Webb B W, Solovjov V P.
|
79 |
Zhang Q, Shan S, Zhou Z.
|
80 |
Cai X, Shan S, Zhang Q.
|
81 |
Yin C, Johansen L C R, Rosendahl L A.
|
82 |
Yang Z, Gopan A. Improved global model for predicting gas radiative properties over a wide range of conditions. Thermal Science and Engineering Progress, 2021, 22: 100856
|
83 |
Bordbar H, Coelho F R, Fraga G C.
|
84 |
Wang B, Xuan Y. An improved WSGG model for exhaust gases of aero engines within broader ranges of temperature and pressure variations. International Journal of Heat and Mass Transfer, 2019, 136: 1299–1310
|
85 |
Zhou Y, Duan R, Zhu X.
|
86 |
Xu J, Chen R, Meng H. WSGG models for radiative heat transfer calculations in hydrogen and hydrogen-mixture flames at various pressures. International Journal of Hydrogen Energy, 2021, 46(61): 31452–31466
|
87 |
Yin C. Effects of moisture release and radiation properties in pulverized fuel combustion: A CFD modelling study. Fuel, 2016, 165: 252–259
|
88 |
Shan S, Chen C, Loutzenhiser P G.
|
89 |
Hua Y, Flamant G, Lu J.
|
90 |
Bäckström D, Gall D, Pushp M.
|
91 |
Tian X, Zhu Q. Analysis of current research status of particle thermal radiation properties. In: International Conference on Optoelectronic Materials and Devices. Guangzhou: SPIE, 2021, 12164: 84–88
|
92 |
Bahador M, Sundén B. Investigation on the effects of fly ash particles on the thermal radiation in biomass fired boilers. International Journal of Heat and Mass Transfer, 2008, 51(9–10): 2411–2417
|
93 |
Ates C, Selçuk N, Kulah G. Significance of particle concentration distribution on radiative heat transfer in circulating fluidized bed combustors. International Journal of Heat and Mass Transfer, 2018, 117: 58–70
|
94 |
Zeng X, Liang C, Duan L.
|
95 |
Yu M J, Baek S W, Park J H. An extension of the weighted sum of gray gases non-gray gas radiation model to a two phase mixture of non-gray gas with particles. International Journal of Heat and Mass Transfer, 2000, 43(10): 1699–1713
|
96 |
Laubscher R, Rousseau P. An enhanced model of particle radiation properties in high ash gas-particle dispersion flow through industrial gas-to-steam heat exchangers. Fuel, 2021, 285: 119153
|
97 |
Modest M F, Riazzi R J. Assembly of full-spectrum k-distributions from a narrow-band database; effects of mixing gases, gases and nongray absorbing particles, and mixtures with nongray scatterers in nongray enclosures. Journal of Quantitative Spectroscopy & Radiative Transfer, 2005, 90(2): 169–189
|
98 |
Guo J, Hu F, Luo W.
|
99 |
Cao Z, Liang C, Duan L.
|
100 |
Cao Z, Liang C, Zhou X.
|
101 |
Guo J, Hu F, Luo W.
|
102 |
Kim D, Ahn H, Yang W.
|
103 |
Zhou X, Liang C, Cao Z.
|
104 |
Lian G, Zhong W, Liu X. Effects of gas composition and operating pressure on the heat transfer in an oxy-fuel fluidized bed: A CFD–DEM study. Chemical Engineering Science, 2022, 249: 117368
|
105 |
Ma K, Yan W P, Jin F.
|
106 |
YinL, ZhaoH, GaoZ, et al. Study on heat exchange of convection heating surface of a pressurized oxygen enriched coal-fired boiler. In: 5th International Conference on Advanced Design and Manufacturing Engineering. Shenzhen: Atlantis Press, 2015, 641–647
|
107 |
Dong J, Yan W, Zhang C. Enthalpy calculation of flue gas from pressurized oxy-coal combustion based on real gases. Applied Mechanics and Materials, 2013, 325: 340–345
|
108 |
MaK, YanW, GaoZ. Physical properties and convective heat-transfer coefficients of flue gas from pressurized oxy-fuel combustion. Journal of Chinese Society of Power Engineering, 2011, 31(11): 861–868 (in Chinese)
|
109 |
Yan J, Fang M, Lv T.
|
110 |
Ying Z, Zheng X, Cui G. Pressurized oxy-fuel combustion performance of pulverized coal for CO2 capture. Applied Thermal Engineering, 2016, 99: 411–418
|
111 |
Wang C, Lei M, Yan W.
|
112 |
Qiu Y, Zhong W, Yu A. Simulations on pressurized oxy-coal combustion and gasification by molecular dynamics method with ReaxFF. Advanced Powder Technology, 2022, 33(5): 103557
|
113 |
Babiński P, Łabojko G, Kotyczka-Morańska M.
|
114 |
Li L, Duan L, Yang Z.
|
115 |
Chen Q, Wang Y, Li J.
|
116 |
Qin D, Chen Q, Li J.
|
117 |
Geng C, Zhong W, Bian Z.
|
118 |
Ying Z, Zheng X, Cui G. Pressurized oxy-fuel combustion performance of pulverized coal for CO2 capture. Applied Thermal Engineering, 2016, 99: 411–418
|
119 |
Pang L, Shao Y, Zhong W.
|
120 |
Li L, Duan L, Yang Z.
|
121 |
Yang Z, Duan L, Li L.
|
122 |
Liu Q, Zhong W, Yu A.
|
123 |
Yan J, Fang M, Lv T.
|
124 |
LeiM, WangC, YanW, et al. NO emission characteristics of pressurized oxy-fuel bubbling fluidized bed. Journal of Combustion Science and Technology, 2014, 20(05): 377–382 (in Chinese)
|
125 |
WangC, Lei M, YanW, et al. Experimental study on NO(x) release characteristics during pressurized oxy-fuel combustion of pulverized coal. Proceedings of the CSEE, 2012, 32(20): 27–33 (in Chinese) 10.3901/JME.2012.22.027
|
126 |
Lei M, Huang X, Wang C.
|
127 |
Liang X, Wang Q, Luo Z.
|
128 |
Kameda T, Uchiyama N, Yoshioka T. Removal of HCl, SO2, and NO by treatment of acid gas with Mg–Al oxide slurry. Chemosphere, 2011, 82(4): 587–591
|
129 |
Duan Y, Duan L, Hu H.
|
130 |
Lasek J A, Głód K, Janusz M.
|
131 |
Liang X, Wang Q, Luo Z.
|
132 |
Pang L, Shao Y, Zhong W.
|
133 |
Ajdari S, Normann F, Andersson K.
|
134 |
Ajdari S, Normann F, Andersson K.
|
135 |
Tumsa T Z, Lee S H, Normann F.
|
136 |
Wu H, Chen W, Wu J.
|
137 |
Liu Q, Zhong W, Yu A.
|
138 |
Tang R, Liu Q, Zhong W.
|
139 |
Sahu P, Prabu V. Techno-economic analysis on oxy-fuel based steam turbine power system using municipal solid waste and coals with ultrasonicator sulfur removal. Waste Disposal & Sustainable Energy, 2022, 4(2): 131–147
|
140 |
Pang L, Shao Y, Zhong W.
|
141 |
Pang L, Shao Y, Zhong W.
|
142 |
Lasek J A, Janusz M, Zuwała J.
|
143 |
Gu J, Shao Y, Zhong W. 3D simulation on pressurized oxy-fuel combustion of coal in fluidized bed. Advanced Powder Technology, 2020, 31(7): 2792–2805
|
144 |
Duan Y, Duan L, Wang J.
|
145 |
Svoboda K, Pohořelý M. Influence of operating conditions and coal properties on NOx and N2O emissions in pressurized fluidized bed combustion of subbituminous coals. Fuel, 2004, 83(7–8): 1095–1103
|
146 |
Zan H, Chen X, Ma J.
|
147 |
Liang X, Wang Q, Luo Z.
|
148 |
MalavasiM, Allouis C, D’AnnaA. Flameless technology for particulate emissions suppression. In: Italian Section of the Combustion Institute, Combustion Colloquia. 2009
|
149 |
Qiu X, Wang Y, Zhou Z.
|
150 |
DongJ. Emission forms of trace elements during oxygen-enriched combustion at high pressure. Thermal Power Generation, 2016, 45(10): 50–53 (in Chinese)
|
151 |
Xue Z, Zhong Z, Lai X. Investigation on gaseous pollutants emissions during co-combustion of coal and wheat straw in a fluidized bed combustor. Chemosphere, 2020, 240: 124853
|
/
〈 | 〉 |