REVIEW ARTICLE

Effect of graphene and its derivatives on thermo-mechanical properties of phase change materials and its applications: a comprehensive review

  • Sumit NAGAR , 1 ,
  • Kamal SHARMA 1 ,
  • A. K. PANDEY 2 ,
  • V. V. TYAGI 3
Expand
  • 1. Department of Mechanical Engineering, GLA University, Mathura (U.P)-281406, India
  • 2. Research Center for Nano-Materials and Energy Technology (RCNMET), School of Engineering and Technology, Sunway University, 47500 Selangor Darul Ehsan, Malaysia
  • 3. School of Energy Management, Shri Mata Vaishno Devi University, Katra 182320, India

Received date: 13 Jan 2021

Accepted date: 15 Jun 2021

Published date: 15 Apr 2022

Copyright

2021 Higher Education Press

Abstract

Phase change materials (PCMs) play a leading role in overcoming the growing need of advanced thermal management for the storage and release of thermal energy which is to be used for different solar applications. However, the effectiveness of PCMs is greatly affected by their poor thermal conductivity. Therefore, in the present review the progress made in deploying the graphene (Gr) in PCMs in the last decade for providing the solution to the aforementioned inadequacy is presented and discussed in detail. Gr and its derivatives ((Gr oxide (GO), Gr aerogel (GA) and Gr nanoplatelets (GNPs)) based PCMs can improve the thermal conductivity and shape stability, which may be attributed to the extra ordinary thermo-physical properties of Gr. Moreover, it is expected from this review that the advantages and disadvantages of using Gr nanoparticles provide a deep insight and help the researchers in finding out the exact basic properties and finally the applications of Gr can be enhanced.

In this work, Gr and its derivatives based PCMs was characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction spectroscopy (XRD), and scanning electron microscopy (SEM) by which crystal structure was known, phase was identified along with the knowledge of surface structure respectively. The increase in the mass fraction (%) of the filler (Gr and its derivatives) led to even better thermo-physical properties and thermal stability. The thermal characterization was also done by differential scanning calorimetry (DSC), thermo gravimetric analysis (TGA) and thermal conductivity tests. The enthalpy of freezing and melting showed that Gr and its derivatives based PCMs had a very high energy storage capability as reflected in its various applications.

Cite this article

Sumit NAGAR , Kamal SHARMA , A. K. PANDEY , V. V. TYAGI . Effect of graphene and its derivatives on thermo-mechanical properties of phase change materials and its applications: a comprehensive review[J]. Frontiers in Energy, 2022 , 16(2) : 150 -186 . DOI: 10.1007/s11708-021-0795-3

1
Wuttig M, Bhaskaran H, Taubner T. Phase-change materials for non-volatile photonic applications. Nature Photonics, 2017, 11(8): 465–476

DOI

2
Lencer D, Salinga M, Wuttig M. Design rules for phase-change materials in data storage applications. Advanced Materials, 2011, 23(18): 2030–2058

DOI

3
Pielichowska K, Pielichowski K. Phase change materials for thermal energy storage. Progress in Materials Science, 2014, 65: 67–123

DOI

4
Zhu Z, Evans P G, Haglund R F Jr, Dynamically reconfigurable metadevice employing nanostructured phase-change materials. Nano Letters, 2017, 17(8): 4881–4885

DOI

5
McCann J T, Marquez M, Xia Y. Melt coaxial electrospinning: a versatile method for the encapsulation of solid materials and fabrication of phase change nanofibers. Nano Letters, 2006, 6(12): 2868–2872

DOI

6
Zdraveva E, Fang J, Mijovic B, Electrospun poly(vinyl alcohol)/phase change material fibers: morphology, heat properties, and stability. Industrial & Engineering Chemistry Research, 2015, 54(35): 8706–8712

DOI

7
Cho H J,, Preston D J, Zhu Y, Nanoengineered materials for liquid–vapour phase-change heat transfer. Nature Reviews. Materials, 2017, 2(2): 16092

DOI

8
Fallahi A, Guldentops G, Tao M, Review on solid-solid phase change materials for thermal energy storage: molecular structure and thermal properties. Applied Thermal Engineering, 2017, 127: 1427–1441

DOI

9
Ke H. Investigation of the effects of nano-graphite on morphological structure and thermal performances of fatty acid ternary eutectics/polyacrylonitrile/nano-graphite form-stable phase change composite fibrous membranes for thermal energy storage. Solar Energy, 2018, 173: 1197–1206

DOI

10
Liu C, Li F, Ma L, Advanced materials for energy storage. Advanced Materials, 2010, 22(8): E28–E62

DOI

11
Singh R P, Sharma K, Mausam K. Dispersion and stability of metal oxide nanoparticles in aqueous suspension: a review. Materials Today: Proceedings, 2020, 26: 2021–2025

DOI

12
Kant K, Shukla A, Sharma A. Advancement in phase change materials for thermal energy storage applications. Solar Energy Materials and Solar Cells, 2017, 172: 82–92

DOI

13
Graham M, Coca-Clemente J A, Shchukina E, Nanoencapsulated crystallohydrate mixtures for advanced thermal energy storage. Journal of Materials Chemistry A, Materials for Energy and Sustainability, 2017, 5(26): 13683–13691

DOI

14
Vélez C, Khayet M, Ortiz de Zárate J M. Temperature-dependent thermal properties of solid/liquid phase change even-numbered n-alkanes: n-hexadecane, n-octadecane and n-eicosane. Applied Energy, 2015, 143: 383–394

DOI

15
Mohamed S A, Al-Sulaiman F A, Ibrahim N I, A review on current status and challenges of inorganic phase change materials for thermal energy storage systems. Renewable & Sustainable Energy Reviews, 2017, 70: 1072–1089

DOI

16
Joybari M M, Haghighat F, Seddegh S. Natural convection characterization during melting of phase change materials: development of a simplified front tracking method. Solar Energy, 2017, 158: 711–720

DOI

17
Amaral C, Vicente R, Marques P A A P, Phase change materials and carbon nanostructures for thermal energy storage: a literature review. Renewable & Sustainable Energy Reviews, 2017, 79: 1212–1228

DOI

18
Bharadwaj G, Sharma K, Tiwari A K. Performance analysis of hybrid PCM by doping Graphene. Materials Today: Proceedings, 2020, 26: 850–853

DOI

19
Alva G, Lin Y, Liu L, Synthesis, characterization and applications of microencapsulated phase change materials in thermal energy storage: a review. Energy and Building, 2017, 144: 276–294

DOI

20
Jamekhorshid A, Sadrameli S M, Farid M. A review of microencapsulation methods of phase change materials (PCMs) as a thermal energy storage (TES) medium. Renewable & Sustainable Energy Reviews, 2014, 31: 531–542

DOI

21
Su W, Darkwa J, Kokogiannakis G. Review of solid-liquid phase change materials and their encapsulation technologies. Renewable & Sustainable Energy Reviews, 2015, 48: 373–391

DOI

22
Song S, Dong L, Qu Z, Microencapsulated capric-stearic acid with silica shell as a novel phase change material for thermal energy storage. Applied Thermal Engineering, 2014, 70(1): 546–551

DOI

23
Sarı A, Alkan C, Karaipekli A, Microencapsulated n-octacosane as phase change material for thermal energy storage. Solar Energy, 2009, 83(10): 1757–1763

DOI

24
Sarı A, Alkan C, Karaipekli A. Preparation, characterization and thermal properties of PMMA/n-heptadecane microcapsules as novel solid-liquid micro PCM for thermal energy storage. Applied Energy, 2010, 87(5): 1529–1534

DOI

25
Graham M, Shchukina E, de Castro P F, Nanocapsules containing salt hydrate phase change materials for thermal energy storage. Journal of Materials Chemistry A, Materials for Energy and Sustainability, 2016, 4(43): 16906–16912

DOI

26
Sarı A, Alkan C, Bilgin C. Micro/nano encapsulation of some paraffin eutectic mixtures with poly(methyl methacrylate) shell: preparation, characterization and latent heat thermal energy storage properties. Applied Energy, 2014, 136: 217–227

DOI

27
Sarı A, Alkan C, Kahraman Döğüşcü D, Micro/nano-encapsulated n-heptadecane with polystyrene shell for latent heat thermal energy storage. Solar Energy Materials and Solar Cells, 2014, 126: 42–50

DOI

28
Konuklu Y, Paksoy H O, Unal M. Nanoencapsulation of n-alkanes with poly(styrene-co-ethylacrylate) shells for thermal energy storage. Applied Energy, 2015, 150: 335–340

DOI

29
Liu Z, Zhang Y, Hu K, Preparation and properties of polyethylene glycol based semi-interpenetrating polymer network as novel form-stable phase change materials for thermal energy storage. Energy and Building, 2016, 127: 327–336

DOI

30
Zheng Z, Jin J, Xu G, Highly stable and conductive microcapsules for enhancement of joule heating performance. ACS Nano, 2016, 10(4): 4695–4703

DOI

31
Shirin-Abadi A R, Mahdavian A R, Khoee S. New approach for the elucidation of PCM nanocapsules through miniemulsion polymerization with an acrylic shell. Macromolecules, 2011, 44(18): 7405–7414

DOI

32
Sánchez L, Sánchez P, de Lucas A, Microencapsulation of PCMs with a polystyrene shell. Colloid & Polymer Science, 2007, 285(12): 1377–1385

DOI

33
Sarı A, Alkan C, Altıntaş A. Preparation, characterization and latent heat thermal energy storage properties of micro-nanoencapsulated fatty acids by polystyrene shell. Applied Thermal Engineering, 2014, 73(1): 1160–1168

DOI

34
Fan L, Khodadadi J M. Thermal conductivity enhancement of phase change materials for thermal energy storage: a review. Renewable & Sustainable Energy Reviews, 2011, 15(1): 24–46

DOI

35
Zheng Z, Chang Z, Xu G, Microencapsulated phase change materials in solar-thermal conversion systems: understanding geometry-dependent heating efficiency and system reliability. ACS Nano, 2017, 11(1): 721–729

DOI

36
Huang X, Chen X, Li A, Shape-stabilized phase change materials based on porous supports for thermal energy storage applications. Chemical Engineering Journal, 2019, 356: 641–661

DOI

37
Feng L, Wang C, Song P, The form-stable phase change materials based on polyethylene glycol and functionalized carbon nanotubes for heat storage. Applied Thermal Engineering, 2015, 90: 952–956

DOI

38
Schiffres S N, Harish S, Maruyama S, Tunable electrical and thermal transport in ice-templated multilayer graphene nanocomposites through freezing rate control. ACS Nano, 2013, 7(12): 11183–11189

DOI

39
Dreyer D R, Park S, Bielawski C W, The chemistry of graphene oxide. Chemical Society Reviews, 2010, 39(1): 228–240

DOI

40
Mao J, Iocozzia J, Huang J, Graphene aerogels for efficient energy storage and conversion. Energy & Environmental Science, 2018, 11(4): 772–799

DOI

41
Zhou Y, Zheng S, Zhang G. A state-of-the-art-review on phase change materials integrated cooling systems for deterministic parametrical analysis, stochastic uncertainty-based design, single and multi-objective optimisations with machine learning applications. Energy and Building, 2020, 220: 110013

DOI

42
Wong-Pinto L S, Milian Y, Ushak S. Progress on use of nanoparticles in salt hydrates as phase change materials. Renewable & Sustainable Energy Reviews, 2020, 122: 109727

DOI

43
Anupam B R, Sahoo U C, Rath P. Phase change materials for pavement applications: a review. Construction & Building Materials, 2020, 247: 118553

DOI

44
Zhou Y, Zheng S, Zhang G. A review on cooling performance enhancement for phase change materials integrated systems—flexible design and smart control with machine learning applications. Building and Environment, 2020, 174: 106786

DOI

45
Min P, Liu J, Li X, Thermally conductive phase change composites featuring anisotropic graphene aerogels for real-time and fast-charging solar-thermal energy conversion. Advanced Functional Materials, 2018, 28(51): 1805365

DOI

46
Ghosh S, Calizo I, Teweldebrhan D, Extremely high thermal conductivity of graphene: prospects for thermal management applications in nanoelectronic circuits. Applied Physics Letters, 2008, 92(15): 151911

DOI

47
Xin G, Sun H, Scott S M, Advanced phase change composite by thermally annealed defect-free graphene for thermal energy storage. ACS Applied Materials & Interfaces, 2014, 6(17): 15262–15271

DOI

48
Yang J, Jia Y, Bing N, Reduced graphene oxide and zirconium carbide co-modified melamine sponge/paraffin wax composites as new form-stable phase change materials for photothermal energy conversion and storage. Applied Thermal Engineering, 2019, 163: 114412

DOI

49
Kumar K, Sharma K, Verma S, Experimental investigation of graphene-paraffin wax nanocomposites for thermal energy storage. Materials Today: Proceedings, 2019, 18: 5158–5163

DOI

50
Qin M, Xu Y, Cao R, Efficiently controlling the 3D thermal conductivity of a polymer nanocomposite via a hyperelastic double-continuous network of graphene and sponge. Advanced Functional Materials, 2018, 28(45): 1805053

DOI

51
Mu B, Li M. Fabrication and characterization of polyurethane-grafted reduced graphene oxide as solid-solid phase change materials for solar energy conversion and storage. Solar Energy, 2019, 188: 230–238

DOI

52
Zhao Q, He F, Zhang Q, Microencapsulated phase change materials based on graphene Pickering emulsion for light-to-thermal energy conversion and management. Solar Energy Materials and Solar Cells, 2019, 203: 110204

DOI

53
Zhou M, Lin T, Huang F, Highly conductive porous graphene/ceramic composites for heat transfer and thermal energy storage. Advanced Functional Materials, 2013, 23(18): 2263–2269

DOI

54
Zhu Y, Qin Y, Liang S, Graphene/SiO2/n-octadecane nanoencapsulated phase change material with flower like morphology, high thermal conductivity, and suppressed supercooling. Applied Energy, 2019, 250: 98–108

DOI

55
Xia Y, Zhang H, Huang P, Graphene-oxide-induced lamellar structures used to fabricate novel composite solid-solid phase change materials for thermal energy storage. Chemical Engineering Journal, 2019, 362: 909–920

DOI

56
Wang W, Umair M M, Qiu J, Electromagnetic and solar energy conversion and storage based on Fe3O4-functionalised graphene/phase change material nanocomposites. Energy Conversion and Management, 2019, 196: 1299–1305

DOI

57
Li X, Xu G, Peng G, Efficiency enhancement on the solar steam generation by wick materials with wrapped graphene nanoparticles. Applied Thermal Engineering, 2019, 161: 114195

DOI

58
Mu B, Li M. Synthesis of novel form-stable composite phase change materials with modified graphene aerogel for solar energy conversion and storage. Solar Energy Materials and Solar Cells, 2019, 191: 466–475

DOI

59
Zhao G, Feng C, Cheng H, In situ thermal conversion of graphene oxide films to reduced graphene oxide films for efficient dye-sensitized solar cells. Materials Research Bulletin, 2019, 120: 110609

DOI

60
Cao L, Zhang D. Styrene-acrylic emulsion/graphene aerogel supported phase change composite with good thermal conductivity. Thermochimica Acta, 2019, 680: 178351

DOI

61
Zhang Y, Wang K, Tao W, Preparation of microencapsulated phase change materials used graphene oxide to improve thermal stability and its incorporation in gypsum materials. Construction & Building Materials, 2019, 224: 48–56

DOI

62
Feng J, Liu Z, Zhang D, Phase change materials coated with modified graphene-oxide as fillers for silicone rubber used in thermal interface applications. New Carbon Materials, 2019, 34(2): 188–195

DOI

63
Vivekananthan M, Amirtham V A. Characterisation and thermophysical properties of graphene nanoparticles dispersed erythritol PCM for medium temperature thermal energy storage applications. Thermochimica Acta, 2019, 676: 94–103

DOI

64
Zhang Y, Wang J, Qiu J, Ag-graphene/PEG composite phase change materials for enhancing solar-thermal energy conversion and storage capacity. Applied Energy, 2019, 237: 83–90

DOI

65
Liu L, Zheng K, Yan Y, Graphene Aerogels Enhanced Phase Change Materials prepared by one-pot method with high thermal conductivity and large latent energy storage. Solar Energy Materials and Solar Cells, 2018, 185: 487–493

DOI

66
Xue F, Lu Y, Qi X, Melamine foam-templated graphene nanoplatelet framework toward phase change materials with multiple energy conversion abilities. Chemical Engineering Journal, 2019, 365: 20–29

DOI

67
Song X, Cai Y, Wang W, Thermal behavior and shape-stabilization of fatty acid eutectics/electrospun carbon nano-felts composite phase change materials enhanced by reduced graphene oxide. Solar Energy Materials and Solar Cells, 2019, 191: 306–315

DOI

68
Li S, Kong L, Wang H, Thermal performance and shape-stabilization of comb-like polymeric phase change materials enhanced by octadecylamine-functionalized graphene oxide. Energy Conversion and Management, 2018, 168: 119–127

DOI

69
Zou D, Ma X, Liu X, Thermal performance enhancement of composite phase change materials (PCM) using graphene and carbon nanotubes as additives for the potential application in lithium-ion power battery. International Journal of Heat and Mass Transfer, 2018, 120: 33–41

DOI

70
Sze J Y, Mu C, Ayachi F, Highly efficient nanofiller based on carboxylated graphene oxide in phase change materials for cold thermal energy storage. Energy Procedia, 2018, 152: 198–203

DOI

71
Liang K, Shi L, Zhang J, Fabrication of shape-stable composite phase change materials based on lauric acid and graphene/graphene oxide complex aerogels for enhancement of thermal energy storage and electrical conduction. Thermochimica Acta, 2018, 664: 1–15

DOI

72
Chen D, Qin S, Tsui G C P, Fabrication, morphology and thermal properties of octadecylamine-grafted graphene oxide-modified phase-change microcapsules for thermal energy storage. Composites Part B, Engineering, 2019, 157: 239–247

DOI

73
Ramakrishnan S, Wang X, Sanjayan J. Thermal enhancement of paraffin/hydrophobic expanded perlite granular phase change composite using graphene nanoplatelets. Energy and Building, 2018, 169: 206–215

DOI

74
Hussain A, Abidi I H, Tso C Y, Thermal management of lithium ion batteries using graphene coated nickel foam saturated with phase change materials. International Journal of Thermal Sciences, 2018, 124: 23–35

DOI

75
Zhou Y, Liu X, Sheng D, Graphene oxide/polyurethane-based solid-solid phase change materials with enhanced mechanical properties. Thermochimica Acta, 2017, 658: 38–46

DOI

76
Liu X, Rao Z. Experimental study on the thermal performance of graphene and exfoliated graphite sheet for thermal energy storage phase change material. Thermochimica Acta, 2017, 647: 15–21

DOI

77
Liu C, Yu W, Chen C, Remarkably reduced thermal contact resistance of graphene/olefin block copolymer/paraffin form stable phase change thermal interface material. International Journal of Heat and Mass Transfer, 2020, 163: 120393

DOI

78
Cao B, Zou J, Hu G, Enhanced thermal transport across multilayer graphene and water by interlayer functionalization. Applied Physics Letters, 2018, 112(4): 041603

DOI

79
Zou J, Cao B. Phonon thermal properties of graphene on h-BN from molecular dynamics simulations. Applied Physics Letters, 2017, 110(10): 103106

DOI

80
Shahid U B, Abdala A. A critical review of phase change material composite performance through Figure-of-Merit analysis: graphene vs boron nitride. Energy Storage Materials, 2021, 34: 365–387

DOI

81
Li G, Hong G, Dong D, Multiresponsive graphene-aerogel-directed phase-change smart fibers. Advanced Materials, 2018, 30(30): 1801754

DOI

82
Wei X, Xue F, Qi X, Photo- and electro-responsive phase change materials based on highly anisotropic microcrystalline cellulose/graphene nanoplatelet structure. Applied Energy, 2019, 236: 70–80

DOI

83
Li Y, Chen Y, Huang X, Anisotropy-functionalized cellulose-based phase change materials with reinforced solar-thermal energy conversion and storage capacity. Chemical Engineering Journal, 2021, 415: 129086

DOI

84
Tang Y, Jia Y, Alva G, Synthesis, characterization and properties of palmitic acid/high density polyethylene/graphene nanoplatelets composites as form-stable phase change materials. Solar Energy Materials and Solar Cells, 2016, 155: 421–429

DOI

85
Silakhori M, Fauzi H, Mahmoudian M R, Preparation and thermal properties of form-stable phase change materials composed of palmitic acid/polypyrrole/graphene nanoplatelets. Energy and Building, 2015, 99: 189–195

DOI

86
Mehrali M, Tahan Latibari S, Mehrali M, Preparation of nitrogen-doped graphene/palmitic acid shape stabilized composite phase change material with remarkable thermal properties for thermal energy storage. Applied Energy, 2014, 135: 339–349

DOI

87
He L, Wang H, Yang F, Preparation and properties of polyethylene glycol/unsaturated polyester resin/graphene nanoplates composites as form-stable phase change materials. Thermochimica Acta, 2018, 665: 43–52

DOI

88
Li Y, Li Y, Huang X, Graphene-CoO/PEG composite phase change materials with enhanced solar-to-thermal energy conversion and storage capacity. Composites Science and Technology, 2020, 195: 108197

DOI

89
Yu C, Yang S H, Pak S Y, Graphene embedded form stable phase change materials for drawing the thermo-electric energy harvesting. Energy Conversion and Management, 2018, 169: 88–96

DOI

90
Jeon J, Park J H, Wi S, Thermal performance enhancement of a phase change material with expanded graphite via ultrasonication. Journal of Industrial and Engineering Chemistry, 2019, 79: 437–442

DOI

91
Zhou Y, Liu X, Sheng D, Graphene size-dependent phase change behaviors of in situ reduced grapehene oxide/polyurethane-based solid-solid phase change composites. Chemical Physics Letters, 2018, 709: 52–59

DOI

92
Zhou Y, Liu X, Sheng D, Polyurethane-based solid-solid phase change materials with in situ reduced graphene oxide for light-thermal energy conversion and storage. Chemical Engineering Journal, 2018, 338: 117–125

DOI

93
Zhou Y, Wang X, Liu X, Polyurethane-based solid-solid phase change materials with halloysite nanotubes-hybrid graphene aerogels for efficient light- and electro-thermal conversion and storage. Carbon, 2019, 142: 558–566

DOI

94
Yang J, Tang L, Bao R, Hybrid network structure of boron nitride and graphene oxide in shape-stabilized composite phase change materials with enhanced thermal conductivity and light-to-electric energy conversion capability. Solar Energy Materials and Solar Cells, 2018, 174: 56–64

DOI

95
Zhang L, Yang W, Jiang Z, Graphene oxide-modified microencapsulated phase change materials with high encapsulation capacity and enhanced leakage-prevention performance. Applied Energy, 2017, 197: 354–363

DOI

96
Cao R, Liu H, Chen S, Fabrication and properties of graphene oxide-grafted-poly(hexadecyl acrylate) as a solid-solid phase change material. Composites Science and Technology, 2017, 149: 262–268

DOI

97
Heu C S, Kim S W, Lee K S, Fabrication of three-dimensional metal-graphene network phase change composite for high thermal conductivity and suppressed subcooling phenomena. Energy Conversion and Management, 2017, 149: 608–615

DOI

98
Li W, Lai-Iskandar S, Tan D, Thermal conductivity enhancement and shape stabilization of phase-change materials using three-dimensional graphene and graphene powder. Energy & Fuels, 2020, 34(2): 2435–2444

DOI

99
Mayilvelnathan V, Valan Arasu A. Experimental investigation on thermal behavior of graphene dispersed erythritol PCM in a shell and helical tube latent energy storage system. International Journal of Thermal Sciences, 2020, 155: 106446

DOI

100
Aslfattahi N, Saidur R, Arifutzzaman A, Improved thermo-physical properties and energy efficiency of hybrid PCM/graphene-silver nanocomposite in a hybrid CPV/thermal solar system. Journal of Thermal Analysis and Calorimetry, 2020, online, https://doi.org/10.1007/s10973-020-10390-x

DOI

101
Lin Y, Cong R, Chen Y, Thermal properties and characterization of palmitic acid/nano silicon dioxide/graphene nanoplatelet for thermal energy storage. International Journal of Energy Research, 2020, 44(7): 5621–5633

DOI

102
Liao H, Chen W, Liu Y, A phase change material encapsulated in a mechanically strong graphene aerogel with high thermal conductivity and excellent shape stability. Composites Science and Technology, 2020, 189: 108010

DOI

103
Padya B, Ravikiran N, Kali R, High thermal energy storage and thermal conductivity of few-layer graphene platelets loaded phase change materials: a thermally conductive additive for thermal energy harvesting. Energy Storage, 2021, 3(1): e199

DOI

104
Azadmanjiri J, Srivastava V K, Kumar P, Two- and three-dimensional graphene-based hybrid composites for advanced energy storage and conversion devices. Journal of Materials Chemistry A, Materials for Energy and Sustainability, 2018, 6(3): 702–734

DOI

105
Darzi M E, Golestaneh S I, Kamali M, Thermal and electrical performance analysis of co-electrospun-electrosprayed PCM nanofiber composites in the presence of graphene and carbon fiber powder. Renewable Energy, 2019, 135: 719–728

DOI

106
Li C, Xie B, Chen D, Ultrathin graphite sheets stabilized stearic acid as a composite phase change material for thermal energy storage. Energy, 2019, 166: 246–255

DOI

107
Mhike W, Focke W W, MacKenzie J, Stearyl alcohol/palm triple pressed acid-graphite nanocomposites as phase change materials. Thermochimica Acta, 2018, 663: 77–84

DOI

108
Tang Y, Lin Y, Jia Y, Improved thermal properties of stearyl alcohol/high density polyethylene/expanded graphite composite phase change materials for building thermal energy storage. Energy and Building, 2017, 153: 41–49

DOI

109
Saeed R M, Schlegel J P, Castano C, Preparation and enhanced thermal performance of novel (solid to gel) form-stable eutectic PCM modified by nano-graphene platelets. Journal of Energy Storage, 2018, 15: 91–102

DOI

110
Liu S, Han L, Xie S, A novel medium-temperature form-stable phase change material based on dicarboxylic acid eutectic mixture/expanded graphite composites. Solar Energy, 2017, 143: 22–30

DOI

111
Qi G, Yang J, Bao R, Hierarchical graphene foam-based phase change materials with enhanced thermal conductivity and shape stability for efficient solar-to-thermal energy conversion and storage. Nano Research, 2017, 10(3): 802–813

DOI

112
Yu C, Youn J R, Song Y S. Encapsulated phase change material embedded by graphene powders for smart and flexible thermal response. Fibers and Polymers, 2019, 20(3): 545–554

DOI

113
Temel U N, Somek K, Parlak M, Transient thermal response of phase change material embedded with graphene nanoplatelets in an energy storage unit. Journal of Thermal Analysis and Calorimetry, 2018, 133(2): 907–918

DOI

114
Jia S, Zhu Y, Wang Z, Improvement of shape stability and thermal properties of PCM using polyethylene glycol (PEG)/sisal fiber cellulose (SFC)/graphene oxide (GO). Fibers and Polymers, 2017, 18(6): 1171–1179

DOI

115
Zhou Y, Liu Z, Zheng S. Influence of novel PCM-based strategies on building cooling performance. In: Eco-efficient Materials for Reducing Cooling Needs in Buildings and Construction. Amsterdam: Elsevier, 2021: 329–353

116
Chauhan D S, Quraishi M A, Ansari K R, Graphene and graphene oxide as new class of materials for corrosion control and protection: present status and future scenario. Progress in Organic Coatings, 2020, 147: 105741

DOI

117
Wang J, Song J, Mu X, Optoelectronic and photoelectric properties and applications of graphene-based nanostructures. Materials Today Physics, 2020, 13: 100196

DOI

118
Preston D J, Mafra D L, Miljkovic N, Scalable graphene coatings for enhanced condensation heat transfer. Nano Letters, 2015, 15(5): 2902–2909

DOI

119
Qian M, Li Z, Fan L, Ultra-light graphene tile-based phase-change material for efficient thermal and solar energy harvest. Applied Energy Materials., 2020, 3(6): 5517–5522

DOI

120
Mofijur M, Mahlia T, Silitonga A, Phase change materials (PCM) for solar energy usages and storage: an overview. Energies, 2019, 12(16): 3167

DOI

121
Kumar P, Kumar Singh P, Nagar S, Effect of different concentration of functionalized graphene on charging time reduction in thermal energy storage system. Materials Today: Proceedings, 2021, 44: 146–152

DOI

122
Ge J, Wang Y, Wang H, Thermal properties and shape stabilization of epoxidized methoxy polyethylene glycol composite PCMs tailored by polydopamine-functionalized graphene oxide. Solar Energy Materials and Solar Cells, 2020, 208: 110388

DOI

123
Sharma A, Tyagi V V, Chen C R, Review on thermal energy storage with phase change materials and applications. Renewable & Sustainable Energy Reviews, 2009, 13(2): 318–345

DOI

124
Xu X, Cui H, Memon S A, Development of novel composite PCM for thermal energy storage using CaCl2·6H2O with graphene oxide and SrCl2·6H2O. Energy and Building, 2017, 156: 163–172

DOI

125
Sayyar M, Weerasiri R R, Soroushian P, Experimental and numerical study of shape-stable phase-change nanocomposite toward energy-efficient building constructions. Energy and Building, 2014, 75: 249–255

DOI

126
Xiao L, Zhao M, Hu H. Study on graphene oxide modified inorganic phase change materials and their packaging behavior. Journal of Wuhan University of Technology (Material Science Edition), 2018, 33(4): 788–792

DOI

127
Prabakaran R, Prasanna Naveen Kumar J, Mohan Lal D, Constrained melting of graphene-based phase change nanocomposites inside a sphere. Journal of Thermal Analysis and Calorimetry, 2020, 139(2): 941–952

DOI

128
Kumar P, Chaudhary D, Varshney P, Critical review on battery thermal management and role of nanomaterial in heat transfer enhancement for electrical vehicle application. Journal of Energy Storage, 2020, 32: 102003

DOI

129
Joseph M, Sajith V. Graphene enhanced paraffin nanocomposite based hybrid cooling system for thermal management of electronics. Applied Thermal Engineering, 2019, 163: 114342

DOI

130
Tariq S L, Ali H M, Akram M A, Experimental investigation on graphene based nanoparticles enhanced phase change materials (GbNePCMs) for thermal management of electronic equipment. Journal of Energy Storage, 2020, 30: 101497

DOI

131
Zhang T, Zhang T, Zhang J, Design of stearic acid/graphene oxide-attapulgite aerogel shape-stabilized phase change materials with excellent thermophysical properties. Renewable Energy, 2021, 165: 504–513

DOI

132
Yuan P, Zhang P, Liang T, Effects of functionalization on energy storage properties and thermal conductivity of graphene/n-octadecane composite phase change materials. Journal of Materials Science, 2019, 54(2): 1488–1501

DOI

133
Wang X, Cheng X, Li Y, Self-assembly of three-dimensional 1-octadecanol/graphene thermal storage materials. Solar Energy, 2019, 179: 128–134

DOI

134
Tu J, Li H, Zhang J, Latent heat and thermal conductivity enhancements in polyethylene glycol/polyethylene glycol-grafted graphene oxide composites. Advanced Composites and Hybrid Materials, 2019, 2(3): 471–480

Outlines

/