Effects of pyrolyzed semi-char blend ratio on coal combustion and pollution emission in a 0.35 MW pulverized coal-fired furnace

Abstract

The effects of blend ratio on combustion and pollution emission characteristics for co-combustion of Shenmu pyrolyzed semi-char (SC), i.e., residuals of the coal pyrolysis chemical processing, and Shenhua bituminous coal (SB) were investigated in a 0.35 MW pilot-scale pulverized coal-fired furnace. The gas temperature and concentrations of gaseous species (O₂, CO, CO₂, NO_x and HCN) were measured in the primary combustion zone at different blend ratios. It is found that the standoff distance of ignition changes monotonically from 132 to 384 mm with the increase in pyrolyzed semi-char blend ratio. The effects on the combustion characteristics may be neglected when the blend ratio is less than 30%. Above the 30% blend ratio, the increase in blend ratio postpones ignition in the primary stage and lowers the burnout rate. With the blend ratio increasing, NO_x emission at the furnace exit is smallest for the 30% blend ratio and highest for the 100% SC. The NO_x concentration was 425 mg/m³ at 6% O₂ and char burnout was 76.23% for the 45% blend ratio. The above results indicate that the change of standoff distance and NO_x emission were not obvious when the blend ratio of semi-char is less than 45%, and carbon burnout changed a little at all blend ratios. The goal of this study is to achieve blending combustion with a large proportion of semi-char without great changes in combustion characteristics. So, an SC blend ratio of no more than 45% can be suitable for the burning of semi-char.

Key words： pulverized-coal combustion; pyrolyzed semi-char; ignition characteristics; pollution emission; char burnout; blend ratio

Acknowledgment

This work was supported by the National Key R&D Program of China (No. 2017YFB0602002).

References

1 Gong Z, Liu Z, Zhou T, Lu Q, Sun Y. Combustion and NO emission of Shenmu char in a 2 MW circulating fluidized bed. Energy & Fuels, 2015, 29(2): 1219–1226

2 Yao Y, Lü Q, Zhu J, Ouyang Z, Zhou Z. Experimental study on preheating process of fine char in a circulating fluidized bed. Proceedings of CSEE, 35(17): 4417–4422 (in Chinese)

3 de Foy B, Lu Z, Streets D G. Satellite NO₂ retrievals suggest China has exceeded its NO_x reduction goals from the twelfth Five-Year Plan. Scientific Reports, 2016, 6(1): 35912

4 Ulloa C, Borrego A G, Helle S, Gordon A L, García X. Char characterization and DTF assays as tools to predict burnout of coal blends in power plants. Fuel, 2005, 84(2–3): 247–257

5 Wang P, Wang C, Tao Z, Yuan M, Du Y, Zhang J, Che D. Co-combustion characteristics of semi-coke and coal under air condition. In: Proceedings of ASME 2018 Power Conference, Lake Buena Vista, FL, USA, 2018

6 Zhang J, Jia X, Wang C, Zhao N, Wang P, Che D. Experimental investigation on combustion and NO formation characteristics of semi-coke and bituminous coal blends. Fuel, 2019, 247(7): 87–96

7 Huang Q, Li S, Li G, Zhao Y, Yao Q. Reduction of fine particulate matter by blending lignite with semi-char in a down-fired pulverized coal combustor. Fuel, 2016, 181(10): 1162–1169

8 Liu G, Liu Q, Zhu B, Ren S, Meng F, Lin F. Co-combustion characteristics and reaction kinetics of pine char and anthracite blends. Journal of Iron & Steel Research, 2016, 28(5): 11–17 (in Chinese)

9 Wang P, Wang G, Zhang J, Lee J Y, Li Y, Wang C. Co-combustion characteristics and kinetic study of anthracite coal and palm kernel shell char. Applied Thermal Engineering, 2018, 143(10): 736–745

10 Clements B R, Zhuang Q, Pomalis R, Wong J, Campbell D. Ignition characteristics of co-fired mixtures of petroleum coke and bituminous coal in a pilot-scale furnace. Fuel, 2012, 97(6): 315–320

11 Wang H, Zhang J, Wang G, Xu R, Zhang P, Liu S, Song T. Characteristics and kinetic analysis of co-combustion of brown coal and anthracite. Journal of Thermal Analysis and Calorimetry, 2016, 126(2): 447–454

12 Faúndez J, Arias B, Rubiera F, Arenillas A, García X, Gordon A L, Pis J J. Ignition characteristics of coal blends in an entrained flow furnace. Fuel, 2007, 86(14): 2076–2080

13 Sahu S G, Mukherjee A, Kumar M, Adak A K, Sarkar P, Biswas S, Tiwari H P, Das A, Banerjee P K. Evaluation of combustion behaviour of coal blends for use in pulverized coal injection (PCI). Applied Thermal Engineering, 2014, 73(1): 1014–1021

14 Zeng G, Sun S, Yang X, Zhao Y, Zhao Z, Ye Z, Gao J. Effect of the primary-air velocity on ignition characteristics of bias pulverized-coal jets. Energy & Fuels, 2017, 31(3): 3182–3195

15 Li Z, Liu Y, Chen Z, Zhu Q, Jia J, Li J, Wang Z, Qin Y. Effect of the air temperature on combustion characteristics and NO_x emissions from a 0.5 MW pulverized coal-fired furnace with deep air staging. Energy & Fuels, 2012, 26(4): 2068–2074

16 Prationo W, Zhang J, Cui J, Wang Y, Zhang L. Influence of inherent moisture on the ignition and combustion of wet Victorian brown coal in air-firing and oxy-fuel modes: part 1: the volatile ignition and flame propagation. Fuel Processing Technology, 2015, 138(10): 670–679

17 Liu C, Li Z, Zhao Y, Chen Z. Influence of coal-feed rates on bituminous coal ignition in a full-scale tiny-oil ignition burner. Fuel, 2010, 89(7): 1690–1694

18 Faúndez J, Arenillas A, Rubiera F, García X, Gordon A L, Pis J J. Ignition behaviour of different rank coals in an entrained flow reactor. Fuel, 2005, 84(17): 2172–2177

19 Molina A, Murphy J J, Winter F, Haynes B S, Blevins L G, Shaddix C R. Pathways for conversion of char nitrogen to nitric oxide during pulverized coal combustion. Combustion and Flame, 2009, 156(3): 574–587

20 Jovanovic R, Milewska A, Swiatkowski B, Goanta A, Spliethoff H. Sensitivity analysis of different devolatilisation models on predicting ignition point position during pulverized coal combustion in O₂/N₂ and O₂/CO₂ atmospheres. Fuel, 2012, 101(11): 23–37

21 Riaza J, Khatami R, Levendis Y A, Alvarez L, Gil M V, Pevida C, Rubiera F, Pis J J. Single particle ignition and combustion of anthracite, semi-anthracite and bituminous coals in air and simulated oxy-fuel conditions. Combustion and Flame, 2014, 161(4): 1096–1108

22 Park D C, Day S J, Nelson P F. Nitrogen release during reaction of coal char with O₂, CO₂, and H₂O. Proceedings of the Combustion Institute, 2005, 30(2): 2169–2175

23 Glarborg P, Jensen A D, Johnsson J E. Fuel nitrogen conversion in solid fuel fired systems. Progress in Energy and Combustion Science, 2003, 29(2): 89–113

24 Lin J Y, Zhang S, Zhang L, Min Z, Tay H, Li C Z. HCN and NH₃ formation during coal/char gasification in the presence of NO. Environmental Science & Technology, 2010, 44(10): 3719–3723