Cathodes with MnO2 catalysts for metal fuel battery
Received date: 15 May 2018
Accepted date: 20 Jul 2018
Published date: 20 Mar 2019
Copyright
A series of cathodes with MnO2 catalysts of metal fuel battery were prepared. The catalyst slurry was treated by ultrasonic dispersion under the ultrasonic time of 20 min, 40 min and 60 min. The cathodes were also dried with the temperature of 90°C, 120°C and 150°C. Besides, the microstructures of the cathodes and discharging performance were investigated. The results indicated that the ultrasonic time and drying temperature had a remarkable influence on the electric current densities, but had little effect on the open-circuit voltage. The effects of oxygen on the current density and voltage of cathode were also studied, and it was found that the method of blowing oxygen to cathode could increase the current density of the metal fuel battery.
Key words: metal fuel battery; cathode; current density; ultrasonic dispersion; oxygen supply
Songbo WEI , He LIU , Ran WEI , Lin CHEN . Cathodes with MnO2 catalysts for metal fuel battery[J]. Frontiers in Energy, 2019 , 13(1) : 9 -15 . DOI: 10.1007/s11708-019-0611-5
1 |
Liu Y, Sun Q, Li W, Adair K R, Li J, Sun X. A comprehensive review on recent progress in aluminum air batteries. Green Energy & Environment, 2017, 2(3): 246–277
|
2 |
Pollet B G, Staffell I, Shang J L. Current status of hybrid, battery and fuel cell electric vehicles: from electrochemistry to market prospects. Electrochimica Acta, 2012, 84: 235–249
|
3 |
Dunn B, Kamath H, Tarascon J M. Electrical energy storage for the grid: a battery of choices. Science, 2011, 334(6058): 928–935
|
4 |
Li Q, Bjerrum N J. Aluminum as anode for energy storage and conversion: a review. Journal of Power Sources, 2002, 110(1): 1–10
|
5 |
Bruce P G, Freunberger S A, Hardwick L J, Tarascon J M. Li-O2 and Li-S batteries with high energy storage. Nature Materials, 2012, 11(1): 19–29
|
6 |
Haneda T, Ono Y, Ikegami T, Akisawa A. Technological assessment of residential fuel cells using hydrogen supply systems for fuel cell vehicles. International Journal of Hydrogen Energy, 2017, 42(42): 26377–26388
|
7 |
Eriksson E L V, Gray E M. Optimization and integration of hybrid renewable energy hydrogen fuel cell energy systems –– a critical review. Applied Energy, 2017, 202: 348–364
|
8 |
Wu G. Current challenge and perspective of PGM-free cathode catalysts for PEM fuel cells. Frontiers in Energy, 2017, 11(3): 286–298
|
9 |
Moghaddam R B, Shahgaldi S, Li X. A facile synthesis of high activity cube-like Pt/carbon composites for fuel cell application. Frontiers in Energy, 2017, 11(3): 245–253
|
10 |
Zhang C, Shen X, Pan Y, Peng Z. A review of Pt-based electrocatalysts for oxygen reduction reaction. Frontiers in Energy, 2017, 11(3): 268–285
|
11 |
Rahman M A, Wang X, Wen C. High energy density metal-air batteries: a review. Journal of the Electrochemical Society, 2013, 160(10): A1759–A1771
|
12 |
Cheng F, Chen J. Metal-air batteries: from oxygen reduction electrochemistry to cathode catalysts. Chemical Society Reviews, 2012, 41(6): 2172–2192
|
13 |
Danner T, Eswara S, Schulz V P, Latz A. Characterization of gas diffusion electrodes for metal-air batteries. Journal of Power Sources, 2016, 324: 646–656
|
14 |
Mokhtar M, Talib M Z M, Majlan E H, Tasirin S M, Ramli W M F W, Daud W R W, Sahari J. Recent developments in materials for aluminum–air batteries: a review. Journal of Industrial and Engineering Chemistry, 2015, 32: 1–20
|
15 |
Liu Y, Sun Q, Li W, Adair K R, Li J, Sun X. A comprehensive review on recent progress in aluminum air batteries. Green Energy & Environment, 2017, 2(3): 246–277
|
16 |
Liu K, Peng Z, Wang H, Ren Y, Liu D, Li J, Tang Y, Zhang N. Fe3C@Fe/N doped graphene-like carbon sheets as a highly efficient catalyst in al-air batteries. Journal of the Electrochemical Society, 2017, 164(6): F475–F483
|
17 |
Wang X, Sebastian P J, Smit M A, Yang H, Gamboa S A. Studies on the oxygen reduction catalyst for zinc–air battery electrode. Journal of Power Sources, 2003, 124(1): 278–284
|
18 |
Mori R. Electrochemical properties of a rechargeable aluminum–air battery with a metal–organic framework as air cathode material. RSC Advances, 2017, 7(11): 6389–6395
|
19 |
Lima F H B, Calegaro M L, Ticianelli E A. Electrocatalytic activity of manganese oxides prepared by thermal decomposition for oxygen reduction. Electrochimica Acta, 2007, 52(11): 3732–3738
|
20 |
Cheng F, Su Y, Liang J, Tao Z, Chen J. MnO2-based nanostructures as catalysts for electrochemical oxygen reduction in alkaline media. Chemistry of Materials, 2010, 22(3): 898–905
|
21 |
Byon H R, Suntivich J, Shao-Horn Y. Graphene-based non-noble-netalcatalysts for oxygen reduction reaction in acid. Chemistry of Materials, 2011, 23(15): 3421–3428
|
22 |
Yu L. Preparation of PTFE microporous fiber with catalytic capability. Dissertation for the Master’s Degree. Hangzhou: Zhejiang Sci-Tech University, 2009 (in Chinese)
|
23 |
Yang W, Li Y, Li B. Influence of ultrasonic pretreatment on modification effect of nano-sized titanium dioxide. Inorganic Chemicals Industry, 2008, 40(8): 27–29
|
24 |
Wang Y, Zeng X, Liu H, Song S. Effect of preparation conditions of catalyst in on the electrochemical properties of Pt/C catalyst. Chinese Journal of Catalysis, 2011, 32(1): 184–188
|
25 |
Cui C. Research and preparation of air electrode for zinc-air battery. Dissertation for the Master’s Degree. Harbin: Harbin Institute of Technology, 2013 (in Chinese)
|
26 |
Wang X, Sebastian P J, Smit M A, Yang H, Gamboa S A. Studies on the oxygen reduction catalyst for zinc–air battery electrode. Journal of Power Sources, 2003, 124(1): 278–284
|
27 |
Yan B. Preparation and characterization of air cathode for aluminum-air battery. Dissertation for the Master’s Degree. Harbin: Harbin Institute of Technology, 2010 (in Chinese)
|
/
〈 | 〉 |