RESEARCH ARTICLE

Numerical study of thermal characteristics of double skin facade system with middle shade

  • Shaoning LIU ,
  • Xiangfei KONG ,
  • Hua YANG ,
  • Minchao FAN ,
  • Xin ZHAN
Expand
  • School of Energy and Environmental Engineering, Hebei University of Technology, Tianjin 300401, China

Received date: 19 Jul 2016

Accepted date: 05 Sep 2016

Published date: 15 Mar 2021

Copyright

2021 Higher Education Press

Abstract

Architectural shade is an effective method for improving building energy efficiency. A new shade combined with the double skin façade (DSF) system, called middle shade (MS), was introduced and developed for buildings. In this paper, a 3D dynamic simulation was conducted to analyze the influence of MS combined with DSF on the indoor thermal characteristics. The research on MS for DSF involves the temperature, the ventilation rate, the velocity distribution of the air flow duct, and the indoor temperature. The results show that the angle and position of the shade in the three seasons are different, and different conditions effectively enhance the indoor thermal characteristics. In summer, the appearance of MS in DSF makes the indoor temperature significantly lower. The indoor temperature is obviously lower than that of the air flow duct, and the temperature of the air flow duct is less affected by MS. The influence of the position of blinds on indoor temperature and ventilation rate is greater than the influence of the angle of blinds. According to the climate characteristics of winter and transition season, in winter, early spring, and late autumn, the indoor temperature decreases with the increase of the position of blinds at daytime, but the opposite is true at night. The results found in this paper can provide reference for the design and use of MS combined with DSF in hot summer and cold winter zone.

Cite this article

Shaoning LIU , Xiangfei KONG , Hua YANG , Minchao FAN , Xin ZHAN . Numerical study of thermal characteristics of double skin facade system with middle shade[J]. Frontiers in Energy, 2021 , 15(1) : 222 -234 . DOI: 10.1007/s11708-017-0480-8

Acknowledgements

This work was supported by the National Natural Science Foundation of China (Grant No. 51408184), Tianjin Natural Science Foundation (15JCQNJC07800) and Excellent Youth Foundation of Hebei Educational Committee (YQ2014005).
1
Poirazis H. ÅkeBlomsterberg, Wall M. Energy simulations for glazed office buildings in Sweden. Energy & Buildings,  2008,  40(7):1161–1170

2
Zhang S M, Da-Lei M A, Ran C Y, BaiL. The influence analysis of the building outside window on the building energy-saving. Journal of Jilin Institute of Architectural & Civil Engineering, 2008, 25(4):49–52

3
Wang Z Y. Research on energy saving for the case analysis of building energy conservation in Xichang city. Advanced Materials Research, 2014, 886: 478–483

DOI

4
Wan L Q, Peng X Y. Comparison of evaluation methods for energy saving effect of building sunshade outside the window. Building Energy & Environment, 2013, 32(2):46–48

5
Xiao Y Q, Ren T. The layout and form design research on BIPV external sun-shading skin in hot-humid areas. Advanced Materials Research, 2011, 374–377: 220–229

6
Kim M, Leigh S B, Kim T, Cho S. A study on external shading devices for reducing cooling loads and improving daylighting in office buildings. Journal of Asian Architecture and Building Engineering, 2015, 14(3): 687–694

DOI

7
Zheng Q R, Ding Y F, Teng-Fei W U. Analysis of the energy saving potential of horizontal external shading in Guangzhou buildings. Journal of Guangzhou University, 2008, 7(6):69–72

8
Cui Y Q, Sun N, Peng Y L, Wang Y. Simulation analysis on sun-shading design case of buildings in cold regions. Applied Mechanics & Materials, 2014, 638–640: 1656–1659

DOI

9
Zeng X D, Huang F A. A study of the optimization of building external shading methods in Chongqing area. Advanced Materials Research, 2011, 368–373: 3753–3756

10
Sun L P. The sun-shading technologies of the existing traditional dwellings in China. Advanced Materials Research, 2013, 689: 163–166

DOI

11
He Y D, Li N P, Liu W B, Zheng D X. Building sun-shading in Changsha area. Building Energy Efficiency, 2014, 42(3):60–62

12
Ye Y, Xu P, Mao J, Ji Y. Experimental study on the effectiveness of internal shading devices. Energy and Building, 2016, 111: 154–163

DOI

13
Kirimtat A, Koyunbaba B K, Chatzikonstantinou I, Sariyildiz S. Review of simulation modeling for shading devices in buildings. Renewable & Sustainable Energy Reviews, 2016, 53: 23–49

DOI

14
Nielsen M V, Svendsen S, Jensen L B. Quantifying the potential of automated dynamic solar shading in office buildings through integrated simulations of energy and daylight. Solar Energy, 2011, 85(5): 757–768

DOI

15
David M, Donn M, Garde F, Lenoir A. Assessment of the thermal and visual efficiency of solar shades. Building and Environment, 2011, 46(7): 1489–1496

DOI

16
Freewan A A Y. Impact of external shading devices on thermal and daylighting performance of offices in hot climate regions. Solar Energy, 2014, 102(4): 14–30

DOI

17
Karlsen L, Heiselberg P, Bryn I, Johra H.Solar shading control strategy for office buildings in cold climate. Energy and Buildings, 2016, 118:316–328

18
Manz H. Total solar energy transmittance of glass double facades with free convection. Energy and Building, 2004, 36(2): 127–136

DOI

19
Gratia E, De Herde A. The most efficient position of shading devices in a double-skin facade. Energy and Building, 2007, 39(3): 364–373

DOI

20
Park C S, Augenbroe G, Messadi T, Thitisawat M, Sadegh N. Calibration of a lumped simulation model for double-skin façade systems. Energy and Buildings, 2004, 36(11):1117–1130

21
Park C S, Augenbroe G, Sadegh N, Thitisawat M, Messadi T. Real-time optimization of a double-skin façade based on lumped modeling and occupant preference. Building and Environment, 2004, 39(8): 939–948

DOI

22
Xu X L, Yang Z. Natural ventilation in the double skin façade with venetian blind. Energy and Building, 2008, 40(8): 1498–1504

DOI

23
Saelens D, Parys W, Roofthooft J, de la Torre A T. Reprint of “Assessment of approaches for modeling louver shading devices in building energy simulation programs”. Energy & Buildings, 2014, 68(Part C): 799–810

24
Gavan V, Woloszyn M, Kuznik F, Roux J J. Experimental study of a mechanically ventilated double-skin facade with Venetian sun-shading device: a full-scale investigation in controlled environment. Solar Energy, 2010, 84(2): 183–195

25
Lee J, Alshayeb M, Chang J D. A study of shading device configuration on the natural ventilation efficiency and energy performance of a double skin façade. Procedia Engineering, 2015, 118: 310–317

DOI

26
Kong X, Liu S, Yang H, Zhong Y, Qi C. An experimental study of all-season operation strategy for a respiration-type double-layer glass curtain wall system in cold zone of China. Building & Environment, 2015, 97:166–176

Outlines

/