DFIG sliding mode control fed by back-to-back PWM converter with DC-link voltage control for variable speed wind turbine
Received date: 06 Aug 2013
Accepted date: 27 Oct 2013
Published date: 09 Sep 2014
Copyright
This paper proposes an indirect power control of doubly fed induction generator (DFIG) with the rotor connected to the electric grid through a back-to-back pulse width modulation (PWM) converter for variable speed wind power generation. Appropriate state space model of the DFIG is deduced. An original control strategy based on a variable structure control theory, also called sliding mode control, is applied to achieve the control of the active and reactive power exchanged between the stator of the DFIG and the grid. A proportional-integral-(PI) controller is used to keep the DC-link voltage constant for a back-to-back PWM converter. Simulations are conducted for validation of the digital controller operation using Matlab/Simulink software.
Youcef BEKAKRA , Djilani BEN ATTOUS . DFIG sliding mode control fed by back-to-back PWM converter with DC-link voltage control for variable speed wind turbine[J]. Frontiers in Energy, 2014 , 8(3) : 345 -354 . DOI: 10.1007/s11708-014-0330-x
| 1 |
Datta R, Rangathan V T. Variable-speed wind power generation using doubly fed wound rotor induction machine-a comparison with alternative schemes. IEEE Transactions on Energy Conversion, 2002, 17(3): 414-421
|
| 2 |
Fan L, Yin H, Miao Z. A novel control scheme for DFIG-based wind energy systems under unbalanced grid conditions. Electric Power Systems Research, 2011, 81(2): 254-262
|
| 3 |
Wu G Q, Ni H J, Wu G X, Zhou J L, Zhu W N, Mao J F, Cao Y. On maximum power point tracking control strategy for variable speed constant frequency wind power generation. Journal of Chongqing University (English Edition), 2010, 9(1): 21-28
|
| 4 |
Hazzab A, Ismail Khalil B, Kamli M, Rahli M. Adaptive fuzzy PI-sliding mode controller for induction motor speed control. International Journal of Emerging Electric Power System, 2005, 4(1): 1-13
|
| 5 |
Benchouia M T, Zouzou S E, Golea A, Ghamri A. Modelling and simulation of variable speed drive system with different regulators. In: The International Conference on Electrical Machines and Systems (ICEMS 2004). Seoul, Korea, 2004
|
| 6 |
Aouzellag D, Ghedamsi K, Berkouk E M. Network power flux control of a wind generator. Renewable Energy, 2009, 34(3): 615-622
|
| 7 |
Abdin E S, Xu W. Control design and dynamic performance analysis of a wind turbine-induction generator unit. IEEE Transactions on Energy Conversion, 2000, 15(1): 91-96
|
| 8 |
El Aimani S, François B, Minne F, Robyns B. Comparison analysis of control structures for variable speed wind turbine. In: Proceedings of CESA: Computational Engineering in Systems Applications. Lille, France, 2003
|
| 9 |
Machmoum M, Poitiers F. Sliding mode control of a variable speed wind energy conversion system with DFIG. In: International Conference and Exhibition on Ecologic Vehicles and Renewable Energies. Monaco, 2009
|
| 10 |
Yao J, Li H, Liao Y, Chen Z. An improved control strategy of limiting the DC-Link voltage fluctuation for a doubly fed induction wind generator. IEEE Transactions on Power Electronics, 2008, 23(3): 1205-1213
|
| 11 |
Bekakra Y, Ben Attous D. A sliding mode speed and flux control of a doubly fed induction machine. IEEE Conference on Electrical and Electronics Engineering. Bursa, Turkey, 2009, 174-178
|
| 12 |
Lo J, Kuo Y. Decoupled fuzzy sliding mode control. IEEE Transactions on Fuzzy Systems, 1998, 6(3): 426-435
|
/
| 〈 |
|
〉 |