An improved delta-star switching scheme for reactive power saving in three-phase induction motors

Abstract

It is proposed that a capacitor can be connected permanently across each phase winding of a three-phase induction motor along with the conventional delta-star switching, for further saving in VARh at reduced loads on the motor. The method of choosing a suitable value for the capacitor and the criteria to be adopted for calculating the power output at which the star to delta switching is to be made are also explained. The experimental results on a 3-phase, 4-pole, 415 V, 50 Hz, 3.3 kW induction motor verify the advantages in adding the capacitor to the phase winding of the motor. Compared to using only a single delta connected stator winding or a delta-star switching, the advantages of the proposed addition of a capacitor, are also demonstrated through a case study conducted on a 400 V, 250 kW motor. Any further improvement in grid side power factor can be achieved by employing a static synchronous compensator (STATCOM) of reduced VAR rating.

Key words： delta-star switching; induction motor; power factor; steady-state analysis

Acknowledgments

The authors wish to thank the authorities of the National Institute of Technology, Tiruchirappalli, Tamil Nadu, India for all the facilities provided for the preparation of this paper.

References

1 Ferreira J T E, de Almeida A T, Ge B, Faria S P, Marques J M. Automatic change of the stator-winding connection of variable-load three-phase induction motors to improve the efficiency and power factor. In: IEEE International Conference on Industrial Technology (ICIT). Hong Kong, China, 2005

2 Ammasai Gounden N, Subbiah M, Krishnamurthy M R. Operating cost optimisation of speed-changing induction motors. IEE Proceedings, 1988, 135(1): 33–38

3 Mohan N. Improvement in energy efficiency of induction motors by means of voltage control. IEEE Transactions on Power Apparatus and Systems, 1980, PAS-99(4): 1466–1471

4 Rowan T M, Lipo T A. A quantitative analysis of induction motor performance by SCR voltage control. IEEE Transactions on Industry Applications, 1983, IA-19(4): 545–553

5 Blaabjerg F, Pedersen J K, Rise S, Hansen H H, Trzynadlowski A M. Can soft starters help save energy? IEEE Industry Applications Magazine, 1997, 3(5): 56–66

6 Kostic M M, Radakovic J. Induction motors with YY/Δ connection change for efficiency and power factor increasing at partial loads. Facta Universitatis-series, lectronics and Energetics, 2006, 19(1): 85–98

7 Karthigaivel R, Kumaresan N, Subbiah M. A three stage stator switching scheme for MWh and MVARh saving in induction motors. In: IEEE International Conference on Power Engineering (IPEC). Singapore, 2007, 1103–1108

8 Kumaresan N, Ammasaigounden N, Subbiah M. A new four-stage power controller for improved energy efficiency and saving in reactive power for three-phase induction motors and wind-driven grid-connected induction generators. Indian Patent No. 234172, 2009

9 Ferreira F J T E, de Almeida A T. Novel multiflux level, three-phase, squirrel-cage induction motor for efficiency and power factor maximization. IEEE Transactions on Energy Conversion, 2008, 23(1): 101–109

10 Ferreira F J T E, de Almeida A T. Method for in-filed evaluation of the stator winding connection of three-phase induction motors to maximize efficiency and power factor. IEEE Transactions on Energy Conversion, 2006, 21(2): 370–379

11 Raja P, Kumaresan N, Subbiah M. Grid-connected induction generators using delta-star switching of the stator winding with a permanently connected capacitor. Wind Engineering, 2012, 36(2): 219–231