Alumina modified sodium vanadate cathode for aqueous zinc-ion batteries

Linsong GAN , Fei LIU , Xinhai YUAN , Lijun FU , Yuping WU

Front. Energy ›› 2023, Vol. 17 ›› Issue (6) : 775 -781.

PDF (3273KB)
Front. Energy ›› 2023, Vol. 17 ›› Issue (6) : 775 -781. DOI: 10.1007/s11708-023-0902-8
RESEARCH ARTICLE
RESEARCH ARTICLE

Alumina modified sodium vanadate cathode for aqueous zinc-ion batteries

Author information +
History +
PDF (3273KB)

Abstract

Aqueous zinc-ion batteries (ZIBs) have great prospects for widespread application in massive scale energy storage. By virtue of the multivalent state, open frame structure and high theoretical specific capacity, vanadium (V)-based compounds are a kind of the most developmental potential cathode materials for ZIBs. However, the slow kinetics caused by low conductivity and the capacity degradation caused by material dissolution still need to be addressed for large-scale applications. Therefore, sodium vanadate Na2V6O16·3H2O (NVO) was chosen as a model material, and was modified with alumina coating through simple mixing and stirring methods. After Al2O3 coating modification, the rate capability and long-cycle stability of Zn//NVO@Al2O3 battery have been significantly improved. The discharge specific capacity of NVO@Al2O3 reach up to 228 mAh/g (at 4 A/g), with a capacity reservation rate of approximately 68% after 1000 cycles, and the Coulombic efficiency (CE) is close to 100%. As a comparison, the capacity reservation rate of Zn//NVO battery is only 27.7%. Its superior electrochemical performance is mainly attributed to the Al2O3 coating layer, which can increase zinc-ion conductivity of the material surface, and to some extent inhibit the dissolution of NVO, making the structure stable and improving the cyclic stability of the material. This paper offers new prospects for the development of cathode coating materials for ZIBs.

Graphical abstract

Keywords

cathodes / aqueous zinc-ion batteries / sodium vanadate / alumina / coating

Cite this article

Download citation ▾
Linsong GAN, Fei LIU, Xinhai YUAN, Lijun FU, Yuping WU. Alumina modified sodium vanadate cathode for aqueous zinc-ion batteries. Front. Energy, 2023, 17(6): 775-781 DOI:10.1007/s11708-023-0902-8

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Zhu J, Lu L, Zeng K Y. Nanoscale mapping of lithium-ion diffusion in a cathode within an all-solid-state lithium-ion battery by advanced scanning probe microscopy techniques. ACS Nano, 2013, 7(2): 1666–1675

[2]

Liu S D, Kang L, Henzie J. . Recent advances and perspectives of battery-type anode materials for potassium ion storage. ACS Nano, 2021, 15(12): 18931–18973

[3]

Liu S D, Kang L, Jun S C. Challenges and strategies toward cathode materials for rechargeable potassium-ion batteries. Advanced Materials, 2021, 33(47): 2004689

[4]

Dunn B, Kamath H, Tarascon J M. Electrical energy storage for the grid: A battery of choices. Science, 2011, 334(6058): 928–935

[5]

Pasta M, Wessells C D, Huggins R A. . A high-rate and long cycle life aqueous electrolyte battery for grid-scale energy storage. Nature Communications, 2012, 3(1): 1149

[6]

Qin B, Cai Y F, Wang P C. . Crystalline molybdenum carbide−amorphous molybdenum oxide heterostructures: In situ surface reconfiguration and electronic states modulation for Li–S batteries. Energy Storage Materials, 2022, 47: 345–353

[7]

Qin B, Zhao X M, Wang Q. . A tandem electrocatalyst with dense heterointerfaces enabling the stepwise conversion of polysulfide in lithium–sulfur batteries. Energy Storage Materials, 2023, 55: 445–454

[8]

Qin B, Cai Y F, Si X Q. . Ultra-lightweight ion-sieving membranes for high-rate lithium sulfur batteries. Chemical Engineering Journal, 2022, 430: 132698

[9]

Qin B, Wang Q, Yao W. . Heterostructured Mn3O4-MnS multi-shelled hollow spheres for enhanced polysulfide regulation in lithium–sulfur batteries. Energy & Environmental Materials, 2022, 0: 12475

[10]

Zhang N, Dong Y, Jia M. . Rechargeable aqueous Zn-V2O5 battery with high energy density and long cycle life. ACS Energy Letters, 2018, 3(6): 1366–1372

[11]

Kundu D, Adams B D, Duffort V. . A high-capacity and long-life aqueous rechargeable zinc battery using a metal oxide intercalation cathode. Nature Energy, 2016, 1(10): 16119

[12]

He P, Quan Y, Xu X. . High-performance aqueous zinc-ion battery based on layered H2V3O8 nanowire cathode. Small, 2017, 11(47): 17025

[13]

Bi W, Gao G, Wu G. . Sodium vanadate/PEDOT nanocables rich with oxygen vacancies for high energy conversion efficiency zinc-ion batteries. Energy Storage Materials, 2021, 40: 209–218

[14]

Alfaruqi M H, Mathew V, Song J. . Electrochemical zinc intercalation in lithium vanadium oxide: A high-capacity zinc-ion battery cathode. Chemistry of Materials, 2017, 29(4): 1684–1694

[15]

He P, Zhang G B, Liao X B. . Sodium ion stabilized vanadium oxide nanowire cathode for high-performance zinc-ion batteries. Advanced Energy Materials, 2018, 8(10): 1702463

[16]

Tang B Y, Zhou J, Fang G Z. . Structural modification of V2O5 as high-performance aqueous zinc-ion battery cathode. Journal of the Electrochemical Society, 2019, 166(4): A480–486

[17]

Guo X, Fang G Z, Zhang W Y. . Mechanistic insights of Zn2+ storage in sodium vanadates. Advanced Energy Materials, 2018, 8(27): 1801819

[18]

Wan F, Niu Z Q. Design strategies for vanadium-based aqueous zinc-ion batteries. Angewandte Chemie International Edition, 2019, 58(46): 16358–16367

[19]

Xing Z Y, Xu G F, Han J W. . Facing the capacity fading of vanadium-based zinc-ion batteries. Trends in Chemistry, 2023, 5(5): 380–392

[20]

Peng Z, Li Y H, Ruan P C. . Metal-organic frameworks and beyond: The road toward zinc-based batteries. Coordination Chemistry Reviews, 2023, 488: 215190

[21]

Yan M, He P, Chen Y. . Water-lubricated intercalation in V2O5·nH2O for high-capacity and high-rate aqueous rechargeable zinc batteries. Advanced Materials, 2018, 30(1): 1703725

[22]

Wan F, Zhang L L, Dai X. . Aqueous rechargeable zinc/sodium vanadate batteries with enhanced performance from simultaneous insertion of dual carriers. Nature Communications, 2018, 9(1): 1656

[23]

Pang Q, Sun C L, Yu Y H. . H2V3O8 nanowire/graphene electrodes for aqueous rechargeable zinc-ion batteries with high rate capability and large capacity. Advanced Energy Materials, 2018, 8(19): 1800144

[24]

Kawabata K, Yoshimatsu H, Fujii E. . Fluidity of a slurry of the graphite powder coated with Al2O3-based metal oxides. Journal of Materials Science Letters, 2001, 20(9): 851–853

[25]

Jung Y S, Cavanagh A S, Gedvilas L. . Improved functionality of lithium-ion batteries enabled by atomic layer deposition on the porous microstructure of polymer separators and coating electrodes. Advanced Energy Materials, 2012, 2(8): 1022–1027

[26]

Kim D S, Kim Y E, Kim H. Improved fast charging capability of graphite anodes via amorphous Al2O3 coating for high power lithium ion batteries. Journal of Power Sources, 2019, 422: 18–24

[27]

Zhang W, Chi Z X, Mao W X. . One-nanometer-precision control of Al2O3 nanoshells through a solution-based synthesis route. Angewandte Chemie International Edition, 2014, 53(47): 12776–12780

[28]

Xu Y, Sun D. Structure and catalytic activity of MoZnAlO catalyst for degradation of cationic red GTL under room conditions. Chemical Engineering Journal, 2012, 183: 332–338

[29]

Bin D, Huo W C, Yuan Y B. . Organic-inorganic-induced polymer intercalation into layered composites for aqueous zinc-ion battery. Chem, 2020, 6(4): 968–984

[30]

Zhu K, Wu T, Huang K. NaCa0.6V6O16·3H2O as an ultra-stable cathode for Zn-ion batteries: The roles of pre-inserted dual-cations and structural water in V3O8 layer. Advanced Energy Materials, 2019, 9(38): 1901968

[31]

Zheng J, Liu C, Tian M. . Fast and reversible zinc-ion intercalation in Al-ion modified hydrated vanadate. Nano Energy, 2020, 70: 104519

[32]

Wang X K, Zhang X X, Zhao G. . Ether−water hybrid electrolyte contributing to excellent Mg ion storage in layered sodium vanadate. ACS Nano, 2022, 16(4): 6093–6102

[33]

Kong L P, Zhang C F, Wang J T. . Free-standing T-Nb2O5/graphene composite papers with ultrahigh gravimetric/volumetric capacitance for Li-ion intercalation pseudocapacitor. ACS Nano, 2015, 9(11): 11200–11208

[34]

Wang J, Polleux J, Lim J. . Pseudocapacitive contributions to electrochemical energy storage in TiO2 (anatase) nanoparticles. Journal of Physical Chemistry C, 2007, 111(40): 14925–14931

[35]

Liu S D, Kang L, Zhang J. . Structural engineering and surface modification of MOF-derived cobalt-based hybrid nanosheets for flexible solid-state supercapacitors. Energy Storage Materials, 2020, 32: 167–177

[36]

Liu S D, Kang L, Zhang J. . Carbonaceous anode materials for non-aqueous sodium- and potassium-ion hybrid capacitors. ACS Energy Letters, 2021, 6(11): 4127–4154

[37]

Liu S D, Kang L, Hu J. . Realizing superior redox kinetics of hollow bimetallic sulfide nanoarchitectures by defect-induced manipulation toward flexible solid-state supercapacitors. Small, 2022, 18(5): 2104507

[38]

Li X, Li Y, Zhao X. . Elucidating the charge storage mechanism of high-performance vertical graphene cathodes for zinc-ion hybrid supercapacitors. Energy Storage Materials, 2022, 53: 505–513

[39]

Dong L B, Yang W, Yang W. . High-power and ultralong-life aqueous zinc-ion hybrid capacitors based on pseudocapacitive charge storage. Nano-Micro Letters, 2019, 11(1): 94

[40]

Dang Z Q, Li X, Li Y. . Heteroatom-rich carbon cathodes toward high-performance flexible zinc-ion hybrid supercapacitors. Journal of Colloid and Interface Science, 2023, 644: 221–229

[41]

Li Y, Peng X Y, Li X. . Functional ultrathin separators proactively stabilizing zinc anodes for zinc-based energy storage. Advanced Materials, 2023, 35(18): 2300019

RIGHTS & PERMISSIONS

Higher Education Press

AI Summary AI Mindmap
PDF (3273KB)

Supplementary files

FEP-23044-OF-GLS_suppl_1

3376

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/