Optimizing environmental insulationthickness of buildings with CHP-based district heating system based on amount of energy and energy grade

Abstract

The increase of insulation thickness (IT) results in the decrease of the heat demand and heat medium temperature. A mathematical model on the optimum environmental insulation thickness (OEIT) for minimizing the annual total environmental impact was established based on the amount of energy and energy grade reduction. Besides, a case study was conducted based on a residential community with a combined heat and power (CHP)-based district heating system (DHS) in Tianjin, China. Moreover, the effect of IT on heat demand, heat medium temperature, exhaust heat, extracted heat, coal consumption, carbon dioxide (CO₂) emissions and sulfur dioxide (SO₂) emissions as well as the effect of three types of insulation materials (i.e., expanded polystyrene, rock wool and glass wool) on the OEIT and minimum annual total environmental impact were studied. The results reveal that the optimization model can be used to determine the OEIT. When the OEIT of expanded polystyrene, rock wool and glass wool is used, the annual total environmental impact can be reduced by 84.563%, 83.211%, and 86.104%, respectively. It can be found that glass wool is more beneficial to the environment compared with expanded polystyrene and rock wool.

Graphical abstract

Keywords

optimum environmental insulation thickness / heat medium temperature / energy grade / extracted heat / exhaust heat

References

[1] Sayegh M A, Jadwiszczak P, Axcell B P, Niemierka E, Bry K, Jouhara H. Heat pump placement, connection and operational modes in European district heating. Energy and Buildings, 2018, 166: 122–144

[2] Lidberg T, Gustafsson M, Myhren J A, Olofsson T, Ödlund (former Trygg) L.. Environmental impact of energy refurbishment of buildings within different district heating systems. Applied Energy, 2018, 227: 231–238

[3] Badami M, Gerboni R, Portoraro A. Determination and assessment of indices for the energy performance of district heating with cogeneration plants. Energy, 2017, 127: 697–703

[4] Werner S. International review of district heating and cooling. Energy, 2017, 137: 617–631

[5] Frederiksen S, Werner S. District Heating and Cooling. Lund: Studentlitteratur, 2013

[6] Mazhar A R, Liu S L, Shukla A. A state of art review on the district heating systems. Renewable & Sustainable Energy Reviews, 2018, 96: 420–439

[7] Building Energy Research Center of Tsinghua University. 2019 Annual Report on China Building Energy Efficiency. Beijing: China Architecture and Building Press, 2019

[8] Brand M, Svendsen S. Renewable-based low-temperature district heating for existing buildings in various stages of refurbishment. Energy, 2013, 62: 311–319

[9] Sağlam N G, Yılmaz A Z, Becchio C, Corgnati S P. A comprehensive cost-optimal approach for energy retrofit of existing multi-family buildings: application to apartment blocks in Turkey. Energy and Buildings, 2017, 150: 224–238

[10] Monetti V, Fabrizio E, Filippi M. Impact of low investment strategies for space heating control: application of thermostatic radiators valves to an old residential building. Energy and Buildings, 2015, 95: 202–210

[11] Roberti F, Oberegger U F, Lucchi E, Troi A. Energy retrofit and conservation of a historic building using multi-objective optimization and an analytic hierarchy process. Energy and Buildings, 2017, 138: 1–10

[12] Ding Y, Tian Z, Wu Y, Zhu N. Achievements and suggestions of heat metering and energy efficiency retrofit for existing residential buildings in northern heating regions of China. Energy Policy, 2011, 39(9): 4675–4682

[13] Yildiz A, Gürlek G, Erkek M, Özbalta N. Economical and environmental analyses of thermal insulation thickness in buildings. Journal of Thermal Science and Technology, 2008, 28(2): 25–34

[14] Lee J, Kim J, Song D, Kim J, Jang C. Impact of external insulation and internal thermal density upon energy consumption of buildings in a temperate climate with four distinct seasons. Renewable & Sustainable Energy Reviews, 2017, 75: 1081–1088

[15] Biswas K, Patel T, Shrestha S, Smith D, Desjarlais A. Whole building retrofit using vacuum insulation panels and energy performance analysis. Energy and Buildings, 2019, 203: 109430

[16] Fang Z S, Li N, Li B Z, Luo G, Huang Y. The effect of building envelope insulation on cooling energy consumption in summer. Energy and Buildings, 2014, 77: 197–205

[17] Yang J M, Wu H J, Wang M R, He S Q, Huang H K. Prediction and optimization of radiative thermal properties of ultrafine fibrous insulations. Applied Thermal Engineering, 2016, 104: 394–402

[18] Alla S A, Bianco V, Tagliafico L A, Scarpa F. Life-cycle approach to the estimation of energy efficiency measures in the buildings sector. Applied Energy, 2020, 264: 114745

[19] Dlimi M, Iken O, Agounoun R, Zoubir A, Kadiri I, Sbai K. Energy performance and thickness optimization of hemp wool insulation and air cavity layers integrated in Moroccan building walls. Sustainable Production and Consumption, 2019, 20: 273–288

[20] Evin D, Ucar A. Energy impact and eco-efficiency of the envelope insulation in residential buildings in Turkey. Applied Thermal Engineering, 2019, 154: 573–584

[21] Cuce E, Cuce P M, Wood C J, Riffat S B. Optimizing insulation thickness and analysing environmental impacts of aerogel-based thermal superinsulation in buildings. Energy and Buildings, 2014, 77: 28–39

[22] Jie P F, Yan F C, Li J, Zhang Y M, Wen Z M. Optimizing the insulation thickness of walls of existing buildings with CHP-based district heating systems. Energy, 2019, 189: 116262

[23] Ozel M. Cost analysis for optimum thicknesses and environmental impacts of different insulation materials. Energy and Buildings, 2012, 49: 552–559

[24] Dylewski R, Adamczyk J. The environmental impacts of thermal insulation of buildings including the categories of damage: a Polish case study. Journal of Cleaner Production, 2016, 137: 878–887

[25] Küçüktopcu E, Cemek B. A study on environmental impact of insulation thickness of poultry building walls. Energy, 2018, 150: 583–590

[26] Ashouri M, Astaraei F R, Ghasempour R, Ahmadi M H, Feidt M. Optimum insulation thickness determination of a building wall using exergetic life cycle assessment. Applied Thermal Engineering, 2016, 106: 307–315

[27] Açıkkalp E, Kandemir S Y. A method for determining optimum insulation thickness: combined economic and environmental method. Thermal Science and Engineering Progress, 2019, 11: 249–253

[28] Braulio-Gonzalo M, Bovea M D. Environmental and cost performance of building’s envelope insulation materials to reduce energy demand: thickness optimization. Energy and Buildings, 2017, 150: 527–545

[29] Dylewski R, Adamczyk J. Economic and environmental benefits of thermal insulation of building external walls. Building and Environment, 2011, 46(12): 2615–2623

[30] Özel G, Açıkkalp E, Görgün B, Yamık H, Caner N. Optimum insulation thickness determination using the environmental and life cycle cost analyses based entransy approach. Sustainable Energy Technologies and Assessments, 2015, 11: 87–91

[31] Rad E A, Fallahi E. Optimizing the insulation thickness of external wall by a novel 3E (energy, environmental, economic) method. Construction & Building Materials, 2019, 205: 196–212

[32] Jie P F, Zhang F H, Fang Z, Wang H B, Zhao Y F. Optimizing the insulation thickness of walls and roofs of existing buildings based on primary energy consumption, global cost and pollutant emissions. Energy, 2018, 159: 1132–1147

[33] Huang H K, Zhou Y J, Huang R D, Wu H J, Sun Y J, Huang G S, Xu T. Optimum insulation thicknesses and energy conservation of building thermal insulation materials in Chinese zone of humid subtropical climate. Sustainable Cities and Society, 2020, 52: 101840

[34] Bianco V, Rosa M D, Scarpa F, Tagliafico L A. Implementation of a cogeneration plant for a food processing facility: a case study. Applied Thermal Engineering, 2016, 102: 500–512

[35] Lund H, Ostergaard P A, Chang M, Werner S, Svendsen S, Sorknæs P, Thorsen J E, Hvelplund F, Mortensen B O G, Mathiesen B V, Bojesen C, Duic N, Zhang X L, Möller B. The status of 4th generation district heating: research and results. Energy, 2018, 164: 147–159

[36] Wang X Y, Zhao X L, Fu L. Entransy analysis of secondary network flow distribution in absorption heat exchanger. Energy, 2018, 147: 428–439

[37] Wang H C, Lahdelma R, Wang X, Jiao W L, Zhu C Z, Zou P H. Analysis of the location for peak heating in CHP based combined district heating systems. Applied Thermal Engineering, 2015, 87: 402–411

[38] Ostergaard D S, Svendsen S. Case study of low-temperature heating in an existing single-family house–a test of methods for simulation of heating system temperatures. Energy and Buildings, 2016, 126: 535–544

[39] Xu J L. Study on the effect of heat exchange equipment margin on thermal conditions in heating system. Dissertation for the Master Degree. Harbin: Harbin Institute of Technology, 2018 (in Chinese)

[40] Xie X Y, Jiang Y. An ideal model of absorption heat pump with ideal solution circulation. Journal of Refrigeration, 2015, 36(1): 1–12 (in Chinese)

[41] Xie X Y, Jiang Y. The ideal process model for absorption heat pumps with real solution. Journal of Refrigeration, 2015, 36(1): 13–23 (in Chinese)

[42] Kecebas A. Determination of optimum insulation thickness in pipe for exergetic life cycle assessment. Energy Conversion and Management, 2015, 105: 826–835

[43] China Academy of Building Research. Design Code for Heating Ventilation and Air Conditioning of Civil Buildings (GB 50736–2012). Beijing: China architecture and Building Press, 2012

[44] Hammond G, Jones C. Inventory of Carbon and Energy (ICE). Version 1.6a. Bath: University of Bath, 2008

[45] Jie P F, Yan F C, Wen Z M, Li J. Evaluation of the biomass gasification-based combined cooling, heating and power system using the maximum generalized entropy principle. Energy Conversion and Management, 2019, 192: 150–160

[46] Xu X C, Lye J F, Zhang H. Combustion Theory and Combustion Equipment. Beijing: Science Press, 2012

[47] Eco-indicator 99 Manual for Designers: A Damage Oriented Method for Life Cycle Impact Assessment. 2013–10–28, available at website of pre-sustainability

[48] The Eco-indicator 95: Manual for designers. 2013–10–29, available at website of pre-sustainability

[49] Lian L M, Tan Y F, Wu J Z, Zhu D. Engineering Thermodynamics. Beijing: China Architecture and Building Press, 2007

[50] Jie P F, Zhu N, Li D Y. Operation optimization of existing district heating systems. Applied Thermal Engineering, 2015, 78: 278–288

RIGHTS & PERMISSIONS

Higher Education Press