Micro/nanofluidics-enabled energy conversion and its implemented devices

Abstract

Most people were not aware of the role of energy as a basic force that drives the development and economic growth of the world until the two great oil crises occurred. According to the conservation law, energy not only exists in various forms but is also capable of being converted from one form to another. The common forms of energy are mechanical energy, chemical energy, internal energy, electrical energy, atomic energy, and electromagnetic energy, among others. The fluids in nature serve as the most common carriers and media in the energy conversion process. Following the rapid development of microelectromechanical systems (MEMS) technology, the energy supply and conversion issue in micro/nano scale has also been introduced in research laboratories worldwide. With unremitting efforts, great quantities of micro/nano scale energy devices have been investigated. Micro/nanofluid shows distinct features in transporting and converting energy similar to their counterpart macroscale tasks. In this paper, a series of micro/nanofluid-enabled energy conversion devices is reviewed based on the transformation between different forms of energy. The evaluation and contradistinction of their performances are also examined. The role of micro/nanofluid as media in micro/nano energy devices is summarized. This contributes to the establishment of a comprehensive and systematic structure in the relationship between energy conversion and fluid in the micro/nano scale. Some fundamental and practical issues are outlined, and the prospects in this challenging area are explored.

Keywords

micro/nanofluid / different energy forms / energy conversion / medium role

References

[1] Jiang Z M. Reflections on energy issues in China. Journal of Shanghai Jiaotong University, 2008, 42(3): 345–359 (in Chinese)

[2] Chen H S. Japan energy supply, demand and structural changes. Contemporary Economy of Japan, 2009, 167(5): 24–28(in Chinese)

[3] Dai Y D, Ren D M. Review the status and effects of renewable energy of China in term of the energy issues faced by China during the national economy development. Renewable Energy, 2005, 120(2): 4–8 (in Chinese)

[4] Ye X D. Outlet of predicament: basic experience of Denmark in dealing with energy source problems and revelation. China Population Resources and Environment, 2006, 16(1): 92–95(in Chinese)

[5] Zhang J Y. Development of energy in Thailand. Southeast Asian Affairs, 2009, 137(1): 12–18(in Chinese)

[6] Yang Z H. Energy issue and Sino-American relations. Coal, 2006, 15(6): 16–17 (in Chinese)

[7] Jiang M Y, Wang C M. Rational countermeasures to the issue of Chinese energy. Journal of Shandong University of Science and Technology (Social Sciences), 2007, 9(1): 56–61 (in Chinese)

[8] Parker S P. McGraw-Hill Encyclopedia of Energy. Columbus, OH, USA: McGraw-Hill Companies, Inc, 1980

[9] Li M, Dai L R. Biophysics: energy, information and life. Shanghai: Science & Technology Press of Shanghai, 2006 (in Chinese)

[10] Li F Z. The World of Energy. Changchun: Jilin Publishing Group Ltd, 2009 (in Chinese)

[11] Cheng L. Energy Source. Jinan: Shandong Science & Technology Press, 2008 (in Chinese)

[12] Kellermayer M S Z, Smith S B, Granzier H L, Bustamante C. Folding-unfolding transitions in singletitin molecules characterized with laser tweezers. Science, 1997, 276(5315): 1112–1116

[13] Fernandez J M, Chu S, Oberhauser A F. RNA structure: Pulling on hair (pins). Science, 2001, 292(5517): 653–654

[14] Sato T. Micro/nano manipulation world. In: Proc IROS. 1996, 834–841

[15] Jager E W H, Inganäs O, Lundström I. Microrobots for micrometer-size objects in aqueous media: potential tools for single-cell manipulation. Science, 2000, 288(5475): 2335–2338

[16] Lu J H, Li H K, An H J, Wang G H, Wang Y, Li M Q, Zhang Y, Hu J. Positioning isolation and biochemical analysis of single DNA molecules based on nanomanipulation and single-molecule PCR. J Am Chem Soc, 2004, 126(36): 11136–11137

[17] Curran S, Carroll D L, Ajayan P M, Redlich P, Roth S, Rühle M, Blau W. Picking needles from the nanotube-haystack. Adv Mater, 1998, 10(4): 311–313

[18] Fu L M, Yang R J, Lin C H, Chien Y S. A novel microfluidic mixer utilizing electrokinetic driving forces under low switching frequency. Electrophoresis, 2005, 5(9): 1814–1824

[19] John T, Mezić I. Maximizing mixing and alignment of orientable particles for reaction enhancement. Phys Fluids, 2007, 19(12): 123602–123617

[20] Khatavkar V, Anderson P D, Toonder J M J, Meijer H E H. Active micromixer based on artificial cilia. Phys Fluids, 2007, 19(8): 083605–083608

[21] Tai R H. MEMS & Microsystems-Design and Manufacture. Columbus, OH, USA: McGraw-Hill Companies, Inc, 2002

[22] Nowak R. A DARPA perspective on small fuel cells for the military. Solid State Energy Conversion Alliance (SECA) Workshop, Arlington, VA, 2001

[23] Dyer C. Fuel cells for portable applications. Journal of Power Sources, 2002, 106(1,2): 31–34

[24] Hoogers G. Fuel Cell Technology Handbook. Boca Raton: CRC Press, 2002

[25] Tarascon J M, Armand M. Issues and challenges facing rechargeable lithium batteries. Nature, 2001, 414(6861): 359–367

[26] Dhar S K, Ovshinsky S R, Gifford P R, Corrigan D A, Fetcenko M A, Venkatesan S. Nickel/metal hydride technology for consumer and electric vehicle batteries-a review and up-date. Journal of Power Sources, 1997, 65(1,2): 1–7

[27] Maynard H L, Meyers J P. Miniature fuel cells for portable power: design considerations and challenges. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, 2002, 20(4): 1287–1297

[28] Service R F. Shrinking fuel cells promise power in your pocket. Science, 2002, 296(5571): 1222–1224

[29] Larminie J, Dicks A. Fuel Cell Systems Explained. 2nd ed. Chichester: John Wiley & Sons Ltd, 2003

[30] Kelley S C, Deluga G A, Smyrl W H. Miniature fuel cells fabricated on silicon substrates. J Am Inst Chem Eng, 2002, 48(5): 1071–1082

[31] Narayanan S R, Valdez T I, Clara F. Development of a miniature fuel cell for portable applications. In: Proceedings of the 199th Meeting on Direct Methanol Fuel Cell. Washington, DC, USA, 2001, 254–263

[32] Chang H, Kim J R, Cho J H, Kim H K, Choi K H. Materials and processes for small fuel cells. Solid State Ionics, 2002, 148(3): 601–606

[33] Bostaph J, Koripella R, Fisher A, Zindel D, Hallmark J, Neutzler J, Bai L. Microfluidic fuel delivery system for 100 mW DMFC. In: Proceedings of the 199th Meeting on Direct Methanol Fuel Cell. Washington, DC, USA, 2001, 274–285

[34] Lu G Q, Wang C Y, Yen T J, Zhang X. Development and characterization of a silicon-based micro direct methanol fuel cell. Electrochim Acta, 2004, 49(5): 821–828

[35] Yao S C, Tang X, Hsieh C C, Alyousef Y, Vladimer M, Fedder G K, Amon C H. Micro-electro-mechanical systems (MEMS)-based micro-scale direct methanol fuel cell development. Energy, 2006, 31(5): 636–649

[36] Yen T J, Fang N, Zhang X, Lu G Q, Wang C Y. A micro methanol fuel cell operating at near room temperature. Applied Physics Letters, 2003, 83(19): 4056–4068

[37] Phirani J, Basu S. Analyses of fuel utilization in microfluidic fuel cell. Journal of Power Sources, 2008, 175(1–3): 261–265

[38] Hoogers G. Fuel Cell Technology Handbook. Boca Raton: CRC Press, 2002

[39] Appleby A, Foulkes F. Fuel Cell Handbook. New York: Van Nostrand Reinhold, 1989

[40] Narayanan S R, Valdez T I. Portable direct methanol fuel cell systems. In: Vielstich W, Lamm A, Gasteiger H A, eds. Handbook of Fuel Cells–Fundamentals, Technology and Application, Hoboken, NJ: Wiley, 2003, 1133

[41] Bailey C. Advances in R&D for the commercialization of small fuel cells and battery technologies for use in portable applications. In: Proceedings of the Conference on Advances in R&D for the Commercialization of Small Fuel Cells and Battery Technologies for Use in Portable Application. Bethesda, MD, 1999

[42] Choi J W, Sung W. A planar and membraneless microscale fuel cell using nickel and silver as catalysts. In: Technical Digest of the 13th International Conference on Solid-State Sensors, Actuators, and Microsystems. 2005, 1852–1855

[43] Dyer C K. A novel thin-film electrochemical device for energy conversion. Nature, 1990, 343(6253): 547–548

[44] Shah K, Shin W C, Besser R S. A PDMS micro proton exchange membrane fuel cell by conventional and non-conventional microfabrication techniques. Sensors and Actuators B, 2004, 97(2,3): 157–167

[45] Park B Y, Madou M J. Miniature PEM fuel cell with pyrolyzed carbon microfluidic plates. The Sixth International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, Berkeley, USA, 2006

[46] Mitrovski S M, Elliott L C C, Nuzzo R G. Microfluidic devices for energy conversion: planar integration and performance of a passive, fully immersed H₂–O₂ fuel cell. Langmuir, 2004, 20(17): 6974–6976

[47] Mitrovski S M, Nuzzo R G. A passive microfluidic hydrogen-air fuel cell with exceptional stability and high performance. Lab on a Chip, 2006, 6(3): 353–361

[48] Zhu L, Lin K Y, Morgan R D, Swaminathan V V, Kim H S, Gurau B, Kim D, Bae B, Masel R I, Shannon M A. Integrated micro-power source based on a micro-silicon fuel cell and a micro electromechanical system hydrogen generator. Journal of Power Sources, 2008, 185(2): 1305–1310

[49] Mench M M, Wang Z H, Bhatia K, Wang C Y. Design of a micro direct methanol fuel cell (μDMFC). In: Proceedings of the IMECE’01, International Mechanical Engineering Congress and Exposition (IMECE). New York, USA, 2001

[50] Yao S C, Tang X D, Hsieh C C, Alyousef Y, Vladimer M, Fedder G K, Amon C H. Micro-electro-mechanical systems (MEMS)-based micro-scale direct methanol fuel cell development. Energy, 2006, 31(5): 636–649

[51] Torres N, Santander J, Esquivel J P, Sabaté N, Figueras E, Ivanov P, Fonseca L, Gràcia I, Cané C. Performance optimization of a passive silicon-based micro-direct methanol fuel cell. Sensors and Actuators B, 2008, 132(2): 540–544

[52] Esquivel J P, Sabaté N, Santander J, Torres N, Cané C. Fabrication and characterization of a passive silicon-based direct methanol fuel cell. Microsyst Technol, 2008, 14(4): 535–541

[53] Kamitani A, Morishita S, Kotaki H, Arscott S. Fuel supply optimization in micro fuel cells. Procedia Chemistry, 2009, 1(1): 457–460

[54] Kamitani A, Morishita S, Kotaki H, Arscott S. Improved fuel use efficiency in microchannel direct methanol fuel cells using a hydrophilic macroporous layer. Journal of Power Sources, 2009, 187(1): 148–155

[55] Kamitani A, Morishita S, Kotaki H, Arscott S. Microfabricated microfluidic fuel cells. Sensors and Actuators B: Chemical, 2009in Press)

[56] Shen M, Walter S, Gijs M A M. Monolithic micro-direct methanol fuel cell in polydimethylsiloxane with microfluidic channel-integrated Nafion strip. Journal of Power Sources, 2009, 193(2): 761–765

[57] Wilson M S. Methanol decomposition fuel processor for portable power applications. International Journal of Hydrogen Energy, 2009, 34(7): 2955–2964

[58] Song Y A, Batist C, Sarpeshkar R, Han J. Rapid fabrication of microfluidic polymer electrolyte membrane fuel cell in PDMS by surface patterning of perfluorinated ion-exchange resin. Journal of Power Sources, 2008, 183(2): 674–677

[59] Wadsworth C J, Yanagisawa N, Dutta D. Nanochannel arrays as supports for proton exchange membranes in microfluidic fuel cells. Journal of Power Sources, 2010, 195(11): 3636–3639

[60] Ferrigno R, Stroock A D, Clark T D, Mayer M, Whitesides G M. Membraneless vanadium redox fuel cell using laminar flow. Journal of the American Chemical Society, 2002, 124(44): 12930–12931

[61] Kjeang E, Michel R, Harrington D A, Sinton D, Djilali N. An alkaline microfluidic fuel cell based on formate and hypochlorite bleach. Electrochimica Acta, 2008, 54(2): 698–705

[62] Kjeang E, Proctor B T, Brolo A G, Harrington D A, Djilali N, Sinton D. High-performance microfluidic vanadium redox fuel cell. Electrochimica Acta, 2007, 52(15): 4942–4946

[63] Kjeang E, McKechnie J, Sinton D, Djilali N. Planar and three-dimensional microfluidic fuel cell architectures based on graphite rod electrodes. Journal of Power Sources, 2007, 168(2): 379–390

[64] Kjeang E, Michel R, Harrington D A, Djilali N, Sinton D. A Microfluidic fuel cell with flow-through porous electrodes. Journal of the American Chemical Society, 2008, 130(12): 4000–4006

[65] Sung W, J W Choi. A membraneless microscale fuel cell using non-noble catalysts in alkaline solution. Journal of Power Sources, 2007, 172(1): 198–208

[66] Choban E R, Markoski L J, Wieckowski A, Kenis P J A. Microfluidic fuel cell based on laminar flow. Journal of Power Sources, 2004, 128(1): 54–60

[67] Jayashree R S, Gancs L, Choban E R, Primak A, Natarajan D, Markoski L J, Kenis P J A. Air-breathing laminar flow-based microfluidic fuel cell. Journal of the American Chemical Society, 2005, 127(48): 16758–16759

[68] Sun M H, Casquillas G V, Guo S S, Shi J, Ji H, Ouyang Q, Chen Y. Characterization of microfluidic fuel cell based on multiple laminar flow. Microelectronic Engineering, 2007, 84(5–8): 1182–1185

[69] Salloum K S, Hayes J R, Friesen C A, Posner J D. Sequential flow membraneless microfluidic fuel cell with porous electrodes. Journal of Power Sources, 2008, 180(1): 243–252

[70] Katz E, Filanovsky B, Willner I. A biofuel cell based on two immiscible solvents and glucose oxidase and microperoxidase-11 monolayer-functionalized electrodes. New Journal of Chemistry, 1999, 23: 481–487

[71] Togo M, Takamura A, Asai T, Kaji H, Nishizawa M. Structural studies of enzyme-based microfluidic biofuel cells. Journal of Power Sources, 2008, 178(1): 53–58

[72] Chau L H, Ip J S C, Leung K C F, Li W J, Wong K W. Development of a bio-energy generation system based on microfluidic platform. In: 2008 International Conference on Information and Automation (ICIA 2008). Changsha, China, 2008, 1379–1382

[73] Zebda A, Renaud L, Cretin M, Pichot F, Innocent C, Ferrigno R, Tingry S. A microfluidic glucose biofuel cell to generate micropower from enzymes at ambient temperature. Electrochemistry Communications, 2009, 11(3): 592–595

[74] Zebda A, Renaud L, Cretin M, Innocent C, Pichot F, Ferrigno R, Tingry S. Electrochemical performance of a glucose/oxygen microfluidic biofuel cell. Journal of Power Sources, 2009, 193(2): 602–606

[75] Moore C M, Minteer S D, Martin R S. Microchip-based ethanol/oxygen biofuel cell. Lab on a Chip, 2005, 5(2): 218–225

[76] Cardenas-Valencia A M, Challa V R, Fries D, Langebrake L, Benson R F, Bhansali S. A micro-fluidic galvanic cell as an on-chip power source. Sensors and Actuators B, 2003, 95(1–3): 406–413

[77] Lyklema J. Fundamentals of Interface and Colloid Science. New York: Academic, 1995

[78] Yang J, Lu F Z, Kostiuk L W, Kwok D Y. Electrokinetic microchannel battery by means of electrokinetic and microfluidic phenomena. Journal of Micromechanics and Microengineering, 2003, 13(6): 963–970

[79] Daiguji H, Yang P, Szeri A J, A Majumdar. Electrochemomechanical energy conversion in nanofluidic channels. Nano Lett, 2004, 4(12): 2315–2321

[80] Lu M C, Satyanarayana S, Karnik R, Majumdar A, Wang C C. A mechanical-electrokinetic battery using a nano-porous membrane. Journal of Micromechanics and Microengineering, 2006, 16(4): 667–675

[81] Osterle J F. Electrokinetic energy conversion. Journal of Applied Mechanics, 1964, 31(1): 161–164

[82] Burgreen D, Nakache F R. Efficiency of pumping and power generation in ultrafine electrokinetic systems. Journal of Applied Mechanics, 1965, 32(3): 675–679

[83] Morrison F A, Osterle J F. Electrokinetic energy conversion in ultrafine capillaries. Journal of Chemical Physics, 1965, 43(6): 2111–2115

[84] Khair A S, Squires T M. Surprising consequences of ion conservation in electro-osmosis over a surface charge discontinuity. Journal of Fluid Mechanics, 2008, 615: 323–334

[85] Joly L, Ybert C, Trizac E, Bocquet L. Hydrodynamics within the electric double layer on slipping surfaces. Physical Review Letters, 2004, 93(25): 257805

[86] Ren C L, Li D Q. Improved understanding of the effect of electrical double layer on pressure-driven flow in microchannels. Analytica Chimica Acta, 2005, 531(1): 15–23

[87] Heyden F H J, Bonthuis D J, Stein D, Meyer C, Dekker C. Electrokinetic energy conversion efficiency in nanofluidic channels. Nano Letters, 2006, 6(10): 2232–2237

[88] Chang C C, Yang R J. Electrokinetic energy conversion in micrometer-length nanofluidic channels. Microfluidics and Nanofluidics, 2010, 9(2–3): 225–241

[89] Ren Y Q, Stein D. Slip-enhanced electrokinetic energy conversion in nanofluidic channels. Nanotechnology, 2008, 19 (19) : 195707-1–195707-6

[90] Chun M S, Shim M S, Choi N W. Fabrication and validation of a multi-channel type microfluidic chip for electrokinetic streaming potential devices. Lab on a Chip, 2006, 6(2): 302–309

[91] Heyden F H J, Bonthuis D J, Stein D, Meyer C, Dekker C. Power generation by pressure-driven transport of ions in nanofluidic channels. Nano Letters, 2007, 7(4): 1022–1025

[92] Borno R T, Steinmeyer J D, Maharbiz M M. Charge-pumping in a synthetic leaf for harvesting energy from evaporation-driven flows. Applied Physics Letters, 2009, 95(1): 013705-1–013705-3

[93] Namasivayam V, Larson R G, Burke D T, Burns M A. Transpiration-based micropump for delivering continuous ultra-low flow rates. Journal of Micromechanics and Microengineering, 2003, 13(2): 261–271

[94] Goedecke N, Eijkel J, Manz A. Evaporation driven pumping for chromatography application. Lab on a Chip, 2002, 2(4): 219–223

[95] Wheeler T D, Stroock A D. Transpiration at negative pressures in a synthetic tree. Nature (London), 2008, 455(7210): 208–212

[96] Herrault F, Ji C H, Kim S H, Wu X S, Allen M G, A microfluidic-electric package for power mems generators. In: MEMS 2008. Tucson, AZ, USA, 2008, 112–115

[97] Wang X D, Liu J, Song J H, Wang Z L. Integrated nanogenerators in biofluid. Nano Letters, 2007, 7(8): 2475–2479

[98] Hunter R J. Zeta Potential in Colloid Science, Principles and Applications. New York: Academic Press, 1981

[99] Piyasena M E, Lopez G P, Petsev D N. An electrokinetic cell model for analysis and optimization of electroosmotic microfluidic pumps. Sensors and Actuators B: Chemical, 2006, 113(1): 461–467

[100] Paul P H, Arnold D W, Rakestraw D J. Electrokinetic generation of high pressures using porous microstructures. In: Proceedings of the-MicroTAS’ 98. Banff, Canada, 1998, 49–52

[101] Paul P H, Arnold D W, Neyer D W, Smith K B. Electrokinetic pump application in micro-total analysis systems; mechanical actuation to HPLC. In: Proceedings of the-MicroTAS’ 00. Enschede, The Netherlands, 2000, 583–590

[102] Chen L X, Wang H L, Ma J P, Wang C X, Guan Y F. Fabrication and characterization of a multi-stage electroosmotic pump for liquid delivery. Sensors and Actuators B, 2005, 104(1): 117–123

[103] Ateya D A, Shah A A, Hua S Z. An electrolytically actuated micropump. Review of Scientific Instruments, 2004, 75(4): 915–920

[104] Koeneman P B, Busch-Vishniac I J, Wood K L. Feasibility of micro power supplies for MEMS. Journal of Microelectromechanical Systems, 1997, 6(4): 355–362

[105] Arana L R, Schaevitz S B, Franz A J, Jensen K F, Schmidt M A. A microfabricated suspended-tube chemical reactor for fuel processing. In: proceedings, IEEE micro electro mechanical systems. IEEE international conference on micro electro mechanical systems No15, Las Vegas NV, ETATS-UNIS, 2002, 232–235

[106] Cao H L, Xu J L. Thermal performance of a micro-combustor for micro-gas turbine system. Energy Conversion and Management, 2007, 48(5): 1569–1578

[107] Kumar S, Maruta K, Minaev S. Experimental investigations on the combustion behavior of methane–air mixtures in a micro-scale radial combustor configuration. Journal of Microelectromechanical Systems, 2007, 17(15): 900–908

[108] Pattekar A V, Kothare M V. A microreactor for hydrogen production in micro fuel cell applications. Journal of Microelectromechanical Systems, 2004, 13(1): 7–18

[109] Lee D H, Kwon S. Heat transfer and quenching analysis of combustion in a micro combustion vessel. Journal of Microelectromechanical Systems, 2002, 12(5): 670–676

[110] Spadaccini C M, Lee J, Lukachko S, Waitz I A, Mehra A, Zhang X. High power density silicon combustion systems for micro gas turbine engines. In: Proceedings of ASME TURBO EXPO 2002 Amsterdam, The Netherlands, 2002

[111] Spadaccini C M, Zhang X, Cadouc C P, Mikia N, Waitz I A. Preliminary development of a hydrocarbon-fueled catalytic micro-combustor. Sensors and Actuators A, 2003, 103(1,2): 219–224

[112] Shan X C, Wang Z F, Wu M, Hua J. Studies on a micro combustor for gas turbine engines. Journal of Micromechanics and Microengineering, 2008, 15(9): 17–22

[113] Yang W M, Chou S K, Shu C, Li Z W, Xue H. Combustion in micro-cylindrical combustors with and without a backward facing step. Applied Thermal Engineering, 2002, 22(16): 1777–1787

[114] Loverich J J, Kanno I, Kotera H. Concepts for a new class of all-polymer micropumps. Lab on a Chip, 2006, 6: 1147–1154

[115] Good B T, Bowman C N, Davis R H. A water-activated pump for portable microfluidic applications. Journal of Colloid and Interface Science, 2007, 305(2): 239–249

[116] Farahi R H, Passian A, Zahrai S, Lereu A L, Ferrell T L, Thundat T. Microscale marangoni actuation: all-optical and all-electrical methods. Ultramicroscopy, 2006, 106(8,9): 815–821

[117] Oroszi L, Dér A, Kirei H, Ormos P, Rakovics V. Control of electro-osmostic flow by light. Applied Physics Letters, 2006, 89(26): 263508-1–263508-3

[118] Satoh W, Hosono H, Suzuki H. On-chip microfluidic transport and mixing using electrowetting and incorporation of sensing functions. Analytical Chemistry, 2005, 77(21): 6857–6863

[119] Sim W, Oh J, Choi B. Fabrication, experiment of a microactuator using magnetic fluid for micropump application. Microsystem Technologies, 2006, 12(12): 1085–1091

[120] Yun K S, Cho I J, Bu J U, Kim C J, Yoon E. A surface-tension driven micropump for low-voltage and low-power operations. Journal of Microelectromechanical Systems, 2002, 11(5): 454–461

[121] Jung J Y, Kwak H Y. Fabrication and testing of bubble powered micropumps using embedded microheater. Microfluid Nanofluid, 2007, 3(2): 161–169

[122] Tsai J H, Lin L. A thermal-bubble-actuated micronozzlediffuser pump. Journal of Microelectromechanical Systems, 2002, 11(6): 665–671

[123] Gui L, Liu J. Feasibility study on a freeze-thaw phase change peristaltic pump. In: Annual Heat and Mass Transfer Conference of the Chinese Society of Engineering Thermophysics. Jilin, China, 2004, No. 043028 (in Chinese)

[124] Pal R, Burns M A. Self-contained actuation of phase-change pistons in microchannels. Journal of Micromechanics and Microengineering, 2006, 16(4): 786–793

[125] Roundy S, Wright P K, Rabaey J. A study of low level vibrations as a power source for wireless sensor nodes. Computer Communications, 2003, 26(11): 1131–1144

[126] Kulah H, Najafi K. An electromagnetic micro power generator for low-frequency environmental vibrations. 2005-<month>04</month>-<day>11</day>. http://papers.sae.org/2005-01-1896

[127] Sari I, Balkan T, Kulah H. A wideband electromagnetic micro power generator for wireless microsystems. In: International Conference on Solid-State Sensors, Actuators, and Microsystems. Lyon, France, 2007, 275–278

[128] Herrault F, Ji C H, Shafer R H, Kim S HAllen M G. Ultraminiaturized milliwatt-scale permanent magnet generators. In: International Conference on Solid-State Sensors, Actuators, and Microsystems. Lyon, France, 2007, 899–902

[129] Kim S H, Ji C H, Galle P, Herrault F, Wu X S, Lee J H, Choi C A, Allen M G. An electromagnetic energy scavenger from direct airflow. In: Proceedings of Power MEMS 2008+. Sendai, Japan, 2008

Acknowledgements

This work was partially supported by the National Natural Science Foundation of China (Grant No. 50977087) and the Tsinghua-Yue-Yuen Medical Sciences Fund.

RIGHTS & PERMISSIONS

2014 Higher Education Press and Springer-Verlag Berlin Heidelberg