2027-03-15 2027, Volume 21 Issue 3

  • Select all
  • REVIEW ARTICLE
    Jie-Yu Chang, Bei Chen, Xiao-Qing Xu, Xing Gao, Hao-Ran Zhou, Bin Huang, Wei-Ming Liu, Ning Huang, Huan He, Ai-Jun Miao

    Nanoplastics (NPs, < 1 μm) have emerged as contaminants of global critical concern due to their ubiquitous presence in different water bodies, including drinking water, freshwater (e.g., lakes, rivers), seawater, and wastewater. Compared to microplastics, NPs exhibit higher mobility and bioavailability, leading to more pronounced toxicological effects. Such effects may cascade to higher trophic organisms and ultimately human health through drinking water or dietary exposure. This highlights the urgent need for robust detection and monitoring methodologies to support water quality surveillance and to clarify NP bioaccumulation, ecological toxicity, and associated human health risks within aquatic food webs. This review focuses exclusively on the aqueous phase; the analysis of sediments and biota, which presents distinct methodological complexities, has been comprehensively addressed in prior studies. Herein, we systematically synthesize current analytical methodologies for NPs in aqueous samples, outlining the core workflow steps: sample pretreatment (digestion, enrichment, and separation) followed by characterization, identification, and quantification (microscopy, light scattering, vibrational spectroscopy, and mass spectrometry). We critically evaluate the strengths, limitations, and practical field applicability of each technique. Furthermore, we highlight the key challenges encountered in real-world aquatic environments: matrix interference, ultra-trace NP detection, and the lack of harmonized standardization. Emerging technologies and future research directions—such as AI-assisted analysis, hybrid detection systems, and in situ online monitoring—are thus discussed, with the aim of providing guidance for water quality management and ultimately supporting the mitigation of NP-related environmental and human health risks.

  • RESEARCH ARTICLE
    Tanyu Li, Wei Zhang, Ni Zhou, Yuxuan Xie, Xiaojin Zhang, Pengfei Lin, Jun Wang, Xiaojian Zhang, Chao Chen

    The spills of volatile organic compounds (VOCs) occur frequently in source water and threaten the drinking water safety greatly, especially in rapidly industrializing countries. The VOC contaminants in water can be cost-effectively removed by air stripping. Aeration stripping can be more quickly applied in the field under emergency situation than packed-tower stripping. However, few studies have been conducted to establish a model for aeration stripping process. In this study, a model for VOC removal by aeration stripping was built on basis of the Henry’s Law and then verified by batch tests of eight VOCs including four halogenated hydrocarbons, two alkenyl halides and two benzene chemicals. Another model was established to describe the VOC removal by aeration stripping in continuous operation and verified by continuous flow tests with chloroform as representative contaminant. With these quantitative models, the air-water ratio required for a certain removal proportion can be determined according to the chemical’s basic properties, especially the constant of Henry’s Law. These models are very helpful to guide the emergency response on addressing the VOC spills in water source.