Non-toxic, high selectivity process for the extraction of precious metals from waste printed circuit boards

Abstract

● Au, Ag and Pd were recovered from WPCBs with high efficiencies.

● Au leaching is strictly dependent on WPCB size and reagent concentration.

● High Ag extraction efficiencies are achieved regardless of the WPCB size.

● Pd leaching works better with small and medium WPCB sizes.

● The leaching results suggest the possibility of selective recovery of metals.

The work presented here focused on the extraction of gold (Au), silver (Ag) and palladium (Pd) from electronic waste using a solution of ammonium thiosulfate. Thiosulfate was used as a valid alternative to cyanide for precious metal extractions, due to its non-toxicity and high selectivity. The interactions between sodium thiosulfate, total ammonia/ammonium, precious metal concentrations and the particle size of the waste printed circuit boards (WPCBs) were studied by the response surface methodology (RSM) and the principal component analysis (PCA) to maximize precious metal mobilization. Au extraction reached a high efficiency with a granulometry of less than 0.25 mm, but the consumption of reagents was high. On the other hand, Ag extraction depended neither on thiosulfate/ammonia concentration nor granulometry of WPCBs and it showed efficiency of 90% also with the biggest particle size (0.50 < Ø < 1.00 mm). Pd extraction, similarly to Au, showed the best efficiency with the smallest and the medium WPCB sizes, but required less reagents compared to Au. The results showed that precious metal leaching is a complex process (mainly for Au, which requires more severe conditions in order to achieve high extraction efficiencies) correlated with reagent concentrations, precious metal concentrations and WPCB particle sizes. These results have great potentiality, suggesting the possibility of a more selective recovery of precious metals based on the different granulometry of the WPCBs. Furthermore, the high extraction efficiencies obtained for all the metals bode well in the perspective of large-scale applications.

Graphical abstract

Keywords

Thiosulfate / Printed circuit boards / Precious metals / Leaching / Hydrometallurgy

References

[1] Akcil A , Erust C , Gahan C S , Ozgun M , Sahin M , Tuncuk A . (2015). Precious metal recovery from waste printed circuit boards using cyanide and non-cyanide lixiviants: a review. Waste Management (New York, N.Y.), 45: 258–271

[2] Aylmore M G , Muir D M . (2001). Thiosulfate leaching of gold: a review. Minerals Engineering, 14(2): 135–174

[3] Becci A , Amato A , Fonti V , Karaj D , Beolchini F . (2020). An innovative biotechnology for metal recovery from printed circuit boards. Resources, Conservation and Recycling, 153: 104549

[4] Becci A , Amato A , Rodríguez Maroto J M , Beolchini F . (2019). Prediction model for Cu chemical leaching from printed circuit boards. Industrial & Engineering Chemistry Research, 58(45): 20585–20591

[5] Behnamfard A , Salarirad M M , Veglio F . (2013). Process development for recovery of copper and precious metals from waste printed circuit boards with emphasize on palladium and gold leaching and precipitation. Waste Management (New York, N.Y.), 33(11): 2354–2363

[6] Birloaga I , De Michelis I , Ferella F , Buzatu M , Vegliò F . (2013). Study on the influence of various factors in the hydrometallurgical processing of waste printed circuit boards for copper and gold recovery. Waste Management (New York, N.Y.), 33(4): 935–941

[7] Camelino S , Rao J , Padilla R L , Lucci R . (2015). Initial studies about gold leaching from printed circuit boards (PCB’s) of waste cell phones. Procedia Materials Science, 9: 105–112

[8] Cui J, Zhang L (2008). Metallurgical recovery of metals from electronic waste: a review. Journal of Hazardous Materials, 158(2–3): 228–256

[9] Ha V H , Lee J C , Huynh T H , Jeong J , Pandey B D . (2014). Optimizing the thiosulfate leaching of gold from printed circuit boards of discarded mobile phone. Hydrometallurgy, 149: 118–126

[10] Ha V H, Lee J C, Jeong J, Hai H T, Jha M K (2010). Thiosulfate leaching of gold from waste mobile phones. Journal of Hazardous Materials, 178(1–3): 1115–1119

[11] Ibarra-Galvan V , López-Valdivieso A , Tong X , Cui Y Q . (2014). Role of oxygen and ammonium ions in silver leaching with thiosulfate-ammonia-cupric ions. Rare Metals, 33(2): 225–229

[12] Islam A , Ahmed T , Awual M R , Rahman A , Sultana M , Aziz A A , Monir M U , Teo S H , Hasan M . (2020). Advances in sustainable approaches to recover metals from e-waste: a review. Journal of Cleaner Production, 244: 118815

[13] Jeon S , Tabelin C B , Park I , Nagata Y , Ito M , Hiroyoshi N . (2020). Ammonium thiosulfate extraction of gold from printed circuit boards (PCBs) of end-of-life mobile phones and its recovery from pregnant leach solution by cementation. Hydrometallurgy, 191: 105214

[14] Kaya M (2019). Electronic Waste and Printed Circuit Board Recycling Technologies. Berlin, Germany: Springer

[15] Komnitsas C , Pooley F D . (1991). Optimization of the bacterial okidation of an arsenical gold sulphide concentrate from Olympias, Greece. Minerals Engineering, 4(12): 1297–1303

[16] Kulandaisamy S , Rethinaraj J P , Adaikkalam P , Srinivasan G N , Raghavan M . (2003). The aqueous recovery of gold from electronic scrap. Journal of the Minerals Metals & Materials Society, 55(8): 35–38

[17] Li J Y , Xu X L , Liu W Q . (2012). Thiourea leaching gold and silver from the printed circuit boards of waste mobile phones. Waste Management (New York, N.Y.), 32(6): 1209–1212

[18] Liu R , Li J , Ge Z . (2016). Review on Chromobacterium violaceum for gold bioleaching from e-waste. Procedia Environmental Sciences, 31: 947–953

[19] Oh C J , Lee S O , Yang H S , Ha T J , Kim M J . (2003). Selective leaching of valuable metals from waste printed circuit boards. Journal of the Air & Waste Management Association, 53(7): 897–902

[20] Petter P M H , Veit H M , Bernardes A M . (2014). Evaluation of gold and silver leaching from printed circuit board of cellphones. Waste Management (New York, N.Y.), 34(2): 475–482

[21] Pham V A, Ting Y P (2009). Gold bioleaching of electronic waste by cyanogenic bacteria and its enhancement with bio-oxidation. Advanced Materials Research, 71–73: 661–664

[22] Quinet P , Proost J , Van Lierde A . (2005). Recovery of precious metals from electronic scrap by hydrometallurgical processing routes. Minerals & Metallurgical Processing, 22(01): 17–22

[23] Senanayake G (2004). Analysis of reaction kinetics, speciation and mechanism of gold leaching and thiosulfate oxidation by ammoniacal copper(II) solutions. Hydrometallurgy, 75(1–4): 55–75

[24] Tripathi A , Kumar M , Sau D C , Agrawal A , Chakravarty S , Mankhand T . (2012). Leaching of gold from the waste mobile phone printed circuit boards (PCBs) with ammonium thiosulphate. International Journal of Metallurgical Engineering, 1(2): 17–21

[25] Tyutyunnik O A , Kubrakova I V , Pryazhnikov D V . (2016). Formation and sorption behavior of the palladium thiosulfate complexes under natural conditions (model experiments). Geochemistry International, 54(1): 85–91

[26] Viñals J , Juan E , Ruiz M , Ferrando E , Cruells M , Roca A , Casado J . (2006). Leaching of gold and palladium with aqueous ozone in dilute chloride media. Hydrometallurgy, 81(2): 142–151

[27] Wu Z , Yuan W , Li J , Wang X , Liu L , Wang J . (2017). A critical review on the recycling of copper and precious metals from waste printed circuit boards using hydrometallurgy. Frontiers of Environmental Science & Engineering, 11(5): 8

[28] Zhang X M , Senanayake G . (2016). A review of ammoniacal thiosulfate leaching of gold: an update useful for further research in non-cyanide gold lixiviants. Mineral Processing and Extractive Metallurgy Review, 37(6): 385–411

[29] Zhang Y , Liu S , Xie H , Zeng X , Li J . (2012). Current status on leaching precious metals from waste printed circuit boards. Procedia Environmental Sciences, 16: 560–568

RIGHTS & PERMISSIONS

The Author(s) . This article is published with open access at link.springer.com and journal.hep.com.cn