Hydrothermal treatment of MSWI fly ash for simultaneous dioxins decomposition and heavy metal stabilization

Abstract

Researches on the hydrothermal treatment of municipal solid waste incineration (MSWI) fly ash were conducted to eliminate dioxins and stabilize heavy metals. In order to enhance decomposing polychlorinated dibenzo-dioxins (PCDDs) and polychlorinated dibenzo-furans (PCDFs) during hydrothermal process, a strong reductant carbohydrazide (CHZ) is introduced. A hydrothermal reactor was set up by mixing raw MSWI fly ash or the pre-treated fly ash with water and then heated to a pre-set temperature; CHZ was spiked into solution according to specially defined dosage. Experimental results showed that under the temperatures of 518K and 533K, the decomposition rates of PCDDs/PCDFs were over 80% and 90%, respectively, by total concentration. However, their toxic equivalent (TEQ) decreased only slightly or even increased due to the rising in concentration of congeners 2, 3, 7, 8-TCDD/TCDF, which might be resulted from the highly chlorinated congeners losing their chlorine atoms and being degraded during the hydrothermal process. Better results of TEQ reduction were also obtained under the higher tested temperature of 533K and reactor with addition of 0.1%wt CHZ was corresponded to the best results. Good stabilization of heavy metals was also obtained in the same hydrothermal process especially when ferrous sulphate was added as auxiliary agent.

Keywords

municipal solid wastes incineration (MSWI) / fly ashes / polychlorinated dibenzo-dioxins (PCDDs) / polychlorinated dibenzo-furans (PCDFs) / hydrothermal / heavy metal stabilization