Enhanced biocompatibility and osseointegration of calcium titanate coating on titanium screws in rabbit femur

Zi-li Wang , Rong-zhen He , Bin Tu , Xu Cao , Jin-shen He , Han-song Xia , Chi Liang , Min Zou , Song Wu , Zhen-jun Wu , Kun Xiong

Current Medical Science ›› 2017, Vol. 37 ›› Issue (3) : 362 -370.

PDF
Current Medical Science ›› 2017, Vol. 37 ›› Issue (3) : 362 -370. DOI: 10.1007/s11596-017-1741-9
Article

Enhanced biocompatibility and osseointegration of calcium titanate coating on titanium screws in rabbit femur

Author information +
History +
PDF

Abstract

This study aimed to examine the biocompatibility of calcium titanate (CaTiO3) coating prepared by a simplified technique in an attempt to assess the potential of CaTiO3 coating as an alternative to current implant coating materials. CaTiO3-coated titanium screws were implanted with hydroxyapatite (HA)-coated or uncoated titanium screws into medial and lateral femoral condyles of 48 New Zealand white rabbits. Imaging, histomorphometric and biomechanical analyses were employed to evaluate the osseointegration and biocompatibility 12 weeks after the implantation. Histology and scanning electron microscopy revealed that bone tissues surrounding the screws coated with CaTiO3 were fully regenerated and they were also well integrated with the screws. An interfacial fibrous membrane layer, which was found in the HA coating group, was not noticeable between the bone tissues and CaTiO3-coated screws. X-ray imaging analysis showed in the CaTiO3 coating group, there was a dense and tight binding between implants and the bone tissues; no radiation translucent zone was found surrounding the implants as well as no detachment of the coating and femoral condyle fracture. In contrast, uncoated screws exhibited a fibrous membrane layer, as evidenced by the detection of a radiation translucent zone between the implants and the bone tissues. Additionally, biomechanical testing revealed that the binding strength of CaTiO3 coating with bone tissues was significantly higher than that of uncoated titanium screws, and was comparable to that of HA coating. The study demonstrated that CaTiO3 coating in situ to titanium screws possesses great biocompatibility and osseointegration comparable to HA coating.

Keywords

calcium titanate (CaTiO3) / hydroxyapatite (HA) / coating / biocompatibility / osseointegration / femoral condyles

Cite this article

Download citation ▾
Zi-li Wang, Rong-zhen He, Bin Tu, Xu Cao, Jin-shen He, Han-song Xia, Chi Liang, Min Zou, Song Wu, Zhen-jun Wu, Kun Xiong. Enhanced biocompatibility and osseointegration of calcium titanate coating on titanium screws in rabbit femur. Current Medical Science, 2017, 37(3): 362-370 DOI:10.1007/s11596-017-1741-9

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

BilliF, CampbellP. Nanotoxicology of metal wear particles in total joint arthroplasty: a review of current concepts. J Appl Biomater Biomech, 2010, 8(1): 1-6 PMID: 20740415

[2]

SistiKE, de RossiR, AntoniolliAM, et al. . Surface and biomechanical study of Titanium implants modified by laser with and without hydroxyapatite coating in rabbits. J Oral Implantol, 2012, 38(3): 231-237 PMID: 20690851

[3]

ZartmanKC, BerletGC, HyerCF, et al. . Combining dissimilar metals in orthopaedic implants: revisited. Foot Ankle Spec, 2011, 4(5): 318-323 PMID: 21926357

[4]

SiddharthanA S, KumarTS, SeshadriSK. In situ composite coating of titania-hydroxyapatite on commercially pure titanium by microwave processing. Surf Coat Tech, 2010, 204(11): 1755-1763

[5]

NayabSN, JonesFH, OlsenI. Effects of calcium ion implantation on human bone cell interaction with titanium. Biomaterials, 2005, 26(23): 4717-4727 PMID: 15763251

[6]

RoguskaA, PisarekM, AndrzejczukM, et al. . Surface characterization of Ca-P/Ag/TiO2 nanotube composite layers on Ti intended for biomedical application. J Biomed Mater Res A, 2012, 100(8): 1954-1962 PMID: 22528961

[7]

SatoM, SlamovichEB, WebsterTJ. Enhanced osteoblast adhesion on hydrothermally treated hydroxyapatite/titania/ poly(lactide-co-glycolide) sol-gel titanium coatings. Biomaterials, 2005, 26(12): 1349-1357 PMID: 15482822

[8]

TomaszekaR, PawlowskiaL, GengembrebL, et al. . Microstructure of suspension plasma sprayed multilayer coatings of hydroxyapatite and titanium oxide. Surf Coat Tech, 2007, 201(16–17): 7432-7440

[9]

NarayananR, SeshadriSK. Synthesis and corrosion of functionally gradient TiO2 and hydroxyapatite coatings on Ti-6Al-4V. Mater Chem Phys, 2007, 106(2–3): 406-411

[10]

OhtsuN, SatoK, YanagawaA, et al. . CaTiO(3) coating on titanium for biomaterial application-Optimum thickness and tissue response. J Biomed Mater Res A, 2007, 82(2): 304-315 PMID: 17279562

[11]

JingH, LanL, XiaoDQ, et al. . Biocompatibility of calcium-titanate coating prepared by thermochemical treatment. J Clin Rehab Tissue Eng Res (Chinese), 2011, 16: 2901-2904

[12]

YanJJ, HuJ, LvXW, et al. . Study on osteoblast compatibility of CaTiO3 coating fabricated by laser rapid forming. J Clin Stomatol (Chinese), 2011, 27(12): 715-717

[13]

ZhuYH, WangXK, ZhouYL, et al. . In situ formation of bioactive calcium titanate coatings on titanium screws for medical implants. RSC Advances, 2016, 6: 53182-53187

[14]

HuangY, SongL, HuangT, et al. . Characterization and formation mechanism of nano-structured hydroxyapatite coatings deposited by the liquid precursor plasma spraying process. Biomed Mater, 2010, 5(5): 054113 PMID: 20876965

[15]

PlaczekR, RufferM, DeuretzbacherG, et al. . The fixation strength of hydroxyapatite-coated Schanz screws and standard stainless steel Schanz screws in lower extremity lengthening -A comparison based on a new torque value index: the fixation index. Arch Orthop Traum Su, 2006, 126(6): 369-373

[16]

ZhuW, XiaoJ, WangD, et al. . Experimental study of nano-HA artificial bone with different pore sizes for repairing the radial defect. Int Orthop, 2009, 33(2): 567-571 PMID: 18500516

[17]

LeeKW, BaeCM, JungJY, et al. . Surface characteristics and biological studies of hydroxyapatite coating by a new method. J Biomed Mater Res B Appl Biomater, 2011, 98(2): 395-407 PMID: 21648065

[18]

BaekCH, KoYJ. Characteristics of tissue-engineered cartilage on macroporous biodegradable PLGA scaffold. Laryngoscope, 2006, 116(10): 1829-1834 PMID: 17016212

[19]

KrupaD, BaszkiewiczJ, KozubowskiJA, et al. . Effect of calcium-ion implantation on the corrosion resistance and biocompatibility of titanium. Biomaterials, 2001, 22(15): 2139-2151 PMID: 11432594

[20]

HanawaT, MurakamiK, KiharaS. Calcium phosphate precipitation on calcium-ion-implanted titanium in electrolyte. ASTM STP: Characterization and performance of calcium phosphate coatings for implants, 1994, 1196: 17

[21]

HanawaT, KonM, DoiH, et al. . Amount of hydroxyl radical on calcium-ion-implanted titanium and point of zero charge of constituent oxide of the surface-modified layer. J Mater Sci Mater Med, 1998, 9(2): 89-92 PMID: 15348913

[22]

HanawaT, KamiuraY, YamamotoS, et al. . Early bone formation around calcium-ion-implanted titanium inserted into rat tibia. J Biomed Mater Res A, 1997, 36(1): 131-136

[23]

WebsterTJ, ErgunC, DoremusRH, et al. . Increased osteoblast adhesion on titanium-coated hydroxylapatite that forms CaTiO3. J Biomed Mater Res A, 2003, 67(3): 975-980 PMID: 14613247

[24]

PaitalSR, BunceN, NandwanaP, et al. . Laser surface modification for synthesis of textured bioactive and biocompatible Ca-P coatings on Ti-6Al-4V. J Mater Sci-Mate M, 2011, 22(6): 1393-1406

[25]

OhtsuN, SatoK, SaitoK, et al. . Calcium phosphates formation on CaTiO3 coated titanium. J Mater Sci-Mate M, 2007, 18(6): 1009-1016

[26]

ZhangXM. Preparation of gradient function of biological activity of titanium and titanium alloy by chemical treatment. Titanium Industry Progress (Chinese), 1999, 4: 31-32

[27]

InoueM, RodriguezAP, TakagiT, et al. . Effect of a new titanium coating material (CaTiO3-aC) prepared by thermal decomposition method on osteoblastic cell response. J Biomater Appl, 2010, 24(7): 657-672 PMID: 19726530

[28]

DubeyAK, TripathiG, BasuB. Characterization of hydroxyapatite-perovskite (CaTiO3) composites: Phase evaluation and cellular response. J Biomed Mater Res B, 2010, 95(2): 320-329

[29]

KasemoB, GoldJ. Implant surfaces and interface processes. Adv Dent Res, 1999, 13: 8-20 PMID: 11276751

[30]

YinY, MaBY, XiaTD, et al. . Preparation and bioactivity of hydroxyapatite in medical NiTi-shaped memory alloy. Chin J Tissue Eng Res (Chinese), 2011, 34(15): 6335-6338

[31]

OngJL, CarnesDL, BesshoK. Evaluation of titanium plasma-sprayed and plasma-sprayed hydroxyapatite implants in vivo. Biomaterials, 2004, 25(19): 4601-4606 PMID: 15120505

[32]

OryanA, MeimandiPA, Shafiei-SarvestaniZ, et al. . Effects of combined hydroxyapatite and human platelet rich plasma on bone healing in rabbit model: radiological, macroscopical, hidtopathological and biomechanical evaluation. Cell Tissue Bank, 2012, 13(4): 639-651 PMID: 22180011

[33]

PorterAE, HobbsLW, RosenVB, et al. . The ultrastructure of the plasma-sprayed hydroxyapatite-bone interface predisposing to bone bonding. Biomaterials, 2002, 23(3): 725-733 PMID: 11771693

[34]

HyldahlC, PearsonS, TepicS, et al. . Induction and prevention of pin loosening in external fixation: an in vivo study on sheep tibiae. J Orthop Trauma, 1991, 5(4): 485-492 PMID: 1762013

[35]

LewallenDG, ChaoEY, KasmanRA, et al. . Comparison of the effects of compression plates and external fixators on early bone-healing. J Bone Joint Surg Am, 1984, 66(7): 1084-1091 PMID: 6480637

[36]

LiaoH F, LanaoR v d, BeuckenJJ, et al. . Size matters: effects of PLGA-microsphere size in injectable CPC/PLGA on bone formation. J Tissue Eng Regen Med, 2016, 10(8): 669-678 PMID: 24170734

AI Summary AI Mindmap
PDF

112

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/