Freeze-Derived Microporous Biomaterials for Tissue Engineering Applications

Abstract

Tissue engineering holds immense promise to revolutionize regenerative medicine by enabling the fabrication of functional, patient-specific tissues and organs for clinical translation, yet it continues to face persistent challenges in designing scaffolds that simultaneously recapitulate native tissue architecture, support cell viability, and enable efficient mass transport. Traditional fabrication has moved the field forward, yet routinely falls short of producing hierarchical, anisotropic, biomimetic structures under gentle conditions. Ice-templating (or freeze-casting), which is based on freeze-induced microphase separation, reframes the problem as crystal-growth engineering. This review summarizes current fabrication strategies and their underlying mechanism of ice-templating technology from physical and chemical perspectives. We then highlight recent advances in ice-templating for tissue engineering application fields such as 3D cell culture, wound healing, bone regeneration, nerve repair, and liver support, emphasizing the relationship between microstructure and biomedical functional performance. Finally, we discuss the key challenges in translating ice-templated biomaterials from laboratory research to clinical practice and outline future directions to fully harness this versatile biomedical strategy.

Keywords

biomedical / freeze-casting / ice-template / scaffolds / tissue engineering

References

[1] U. G. K. Wegst, P. H. Kamm, K. Yin, and F. García-Moreno, “Freeze Casting,” Nature Reviews Methods Primers 4 (2024): 28.

[2] M. Hua, S. Wu, Y. Ma, et al., “Strong Tough Hydrogels via the Synergy of Freeze-Casting and Salting out,” Nature 590 (2021): 594–599.

[3] W. Gu, S. Yang, D. Zhao, et al., “Concentric Ice-Templating of Ultracompressible Tough Hydrogels With Bioinspired Circumferentially Aligned Architecture,” Science Advances 11 (2025): eadv7786.

[4] W. H. Zhang, M. J. Yin, Q. Zhao, et al., “Graphene Oxide Membranes With Stable Porous Structure for Ultrafast Water Transport,” Nature Nanotechnology 16 (2021): 337–343.

[5] K. Yin, K. Ji, L. S. Littles, R. Trivedi, A. Karma, and U. G. K. Wegst, “Hierarchical Structure Formation by Crystal Growth-Front Instabilities During Ice Templating,” Proceedings of the National Academy of Sciences of the United States of America 120 (2023): e2210242120.

[6] S. Mohseni Taromsari, M. Salari, H. H. Shi, et al., “PEDOT: PSS-Facilitated Directionally 3-D Assembled Mxene-Based Aerogel for High-Performance Chemoresistive Sensing & Breath Analysis,” Advanced Materials 37 (2025): 2406349.

[7] L. Sun, Y. Wang, D. Xu, and Y. Zhao, “Emerging Technologies for Cardiac Tissue Engineering and Artificial Hearts,” Smart Medicine 2 (2023): e20220040.

[8] R. K. Kankala, J. Zhao, C. G. Liu, et al., “Highly Porous Microcarriers for Minimally Invasive In Situ Skeletal Muscle Cell Delivery,” Small 15 (2019): 1901397.

[9] Z. Guo, W. Li, H. Wu, et al., “Reverse Filling Approach to Mixed Matrix Covalent Organic Framework Membranes for Gas Separation,” Nature Communications 16 (2025): 3617.

[10] Z. Xu, M. Wu, Q. Ye, D. Chen, K. Liu, and H. Bai, “Spinning From Nature: Engineered Preparation and Application of High-Performance Bio-Based Fibers,” Engineering 14 (2022): 100–112.

[11] H. Wang, F. Wang, S. Zhang, et al., “Ice-Templated Synthesis of Atomic Cluster Cocatalyst With Regulable Coordination Number for Enhanced Photocatalytic Hydrogen Evolution,” Advanced Materials 36 (2024): 2400764.

[12] Y. Hu, J. L. Gottfried, R. Pesce-Rodriguez, et al., “Releasing Chemical Energy in Spatially Programmed Ferroelectrics,” Nature Communications 13 (2022): 6959.

[13] X. Duan, Y. Mi, T. Lei, et al., “Highly Elastic Spongelike Hydrogels for Impedance-Based Multimodal Sensing,” ACS Nano 19 (2025): 2909–2921.

[14] C. Zhu, Q. Wang, J. Li, et al., “Synergistic Prestress and Interfacial Interactions Reinforce Layered Brushite/Sodium Alginate Composites,” Advanced Functional Materials 36 (2026): e13381.

[15] S. Deville, “Wood-Like Polymeric Materials by Ice Templating,” National Science Review 6 (2019): 184–185.

[16] Y. Liang, N. Zhao, W. Gao, and H. Bai, “Mechanically and Thermally Guided, Honeycomb-Like Nanocomposites With Strain-Insensitive High Thermal Conductivity for Stretchable Electronics,” ACS Nano 18 (2024): 8199–8208.

[17] B. Wicklein, A. Kocjan, G. Salazar-Alvarez, et al., “Thermally Insulating and Fire-Retardant Lightweight Anisotropic Foams Based on Nanocellulose and Graphene Oxide,” Nature Nanotechnology 10 (2015): 277–283.

[18] Y. Liu, J. Zhou, C. Li, et al., “Interfacial Coupling Effects in Two-Dimensional Ordered Arrays for Microwave Attenuation,” Nature Communications 16 (2025): 202.

[19] Y. Si, J. Yu, X. Tang, J. Ge, and B. Ding, “Ultralight Nanofibre-Assembled Cellular Aerogels With Superelasticity and Multifunctionality,” Nature Communications 5 (2014): 5802.

[20] A. Wat, J. I. Lee, C. W. Ryu, et al., “Bioinspired Nacre-Like Alumina With a Bulk-Metallic Glass-Forming Alloy as a Compliant Phase,” Nature Communications 10 (2019): 961.

[21] F. Bouville, E. Maire, S. Meille, B. Van de Moortele, A. J. Stevenson, and S. Deville, “Strong, Tough and Stiff Bioinspired Ceramics From Brittle Constituents,” Nature Materials 13 (2014): 508–514.

[22] J. Peng, A. P. Tomsia, L. Jiang, B. Z. Tang, and Q. Cheng, “Stiff and Tough PDMS-MMT Layered Nanocomposites Visualized by AIE Luminogens,” Nature Communications 12 (2021): 4539.

[23] S. Wu, M. Hua, Y. Alsaid, et al., “Poly (Vinyl Alcohol) Hydrogels With Broad-Range Tunable Mechanical Properties via the Hofmeister Effect,” Advanced Materials 33 (2021): 2007829.

[24] X. Guo, X. Dong, G. Zou, H. Gao, and W. Zhai, “Strong and Tough Fibrous Hydrogels Reinforced by Multiscale Hierarchical Structures With Multimechanisms,” Science Advances 9 (2023): eadf7075.

[25] M. Xie, Y. Zhang, M. J. Kraśny, C. Bowen, H. Khanbareh, and N. Gathercole, “Flexible and Active Self-Powered Pressure, Shear Sensors Based on Freeze Casting Ceramic–Polymer Composites,” Energy & Environmental Science 11 (2018): 2919–2927.

[26] Y. Bai and H. Zhang, “Freeze-Enabled Synthesis of Functional Materials: Fundamental, Progress, and Applications,” Progress in Materials Science 155 (2026): 101523.

[27] J. Yang, W. Yang, W. Chen, and X. Tao, “An Elegant Coupling: Freeze-Casting and Versatile Polymer Composites,” Progress in Polymer Science 109 (2020): 101289.

[28] G. Shao, D. A. H. Hanaor, X. Shen, and A. Gurlo, “Freeze Casting: From Low-Dimensional Building Blocks to Aligned Porous Structures-A Review of Novel Materials, Methods, and Applications,” Advanced Materials 32 (2020): 1907176.

[29] H. Wang, G. Wang, J. Liu, L. Wang, and F. Meng, “Ice-Templating Derived High-Performance Layered Bulk Polymer Nanocomposites,” Small 21 (2025): e05232.

[30] Q. Cheng, C. Huang, and A. P. Tomsia, “Freeze Casting for Assembling Bioinspired Structural Materials,” Advanced Materials 29 (2017): 1703155.

[31] J. S. Yeon, N. Gupta, P. Bhattacharya, and H. S. Park, “A New Era of Integrative Ice Frozen Assembly Into Multiscale Architecturing of Energy Materials,” Advanced Functional Materials 32 (2022): 2112509.

[32] M. A. Shahbazi, M. Ghalkhani, and H. Maleki, “Directional Freeze-Casting: A Bioinspired Method to Assemble Multifunctional Aligned Porous Structures for Advanced Applications,” Advanced Engineering Materials 22 (2020): 2000033.

[33] A. Mi, L. Guo, S. Guo, et al., “Freeze-Casting in Synthetic Porous Materials: Principles, Different Dimensional Building Units and Recent Applications,” Sustainable Materials and Technologies 39 (2024): e00830.

[34] K. C. Lai, L. Y. Lee, B. Y. Z. Hiew, S. Thangalazhy-Gopakumar, and S. Gan, “Environmental Application of Three-Dimensional Graphene Materials as Adsorbents for Dyes and Heavy Metals: Review on Ice-Templating Method and Adsorption Mechanisms,” Journal of Environmental Sciences 79 (2019): 174–199.

[35] Y. Ning, X. Zeng, J. Huang, Z. Y. Shen, Y. Gao, and R. Che, “Multifunctional Electromagnetic Responsive Porous Materials Synthesized by Freeze Casting: Principles, Progress, and Prospects,” Advanced Functional Materials 35 (2025): 2414838.

[36] H. Joukhdar, A. Seifert, T. Jüngst, J. Groll, M. S. Lord, and J. Rnjak-Kovacina, “Ice Templating Soft Matter: Fundamental Principles and Fabrication Approaches to Tailor Pore Structure and Morphology and Their Biomedical Applications,” Advanced Materials 33 (2021): 2100091.

[37] H. Ren, D. Huang, M. Qiu, et al., “Microfluidic 3D Printing Hydrogels Based on Fish Liver Decellularized Extracellular Matrix for Liver Regeneration,” Smart Medicine 3 (2024): e20240056.

[38] X. Yang, Q. Shi, S. Wang, et al., “Constructing a Hierarchical Composite Scaffold With a Honeycomb-Like Micro-Network for Bone Regeneration Using a One-Step Freeze-Casting Strategy,” Ceramics International 51 (2025): 17786–17799.

[39] R. Cai, S. Miao, X. Cao, M. Nie, and Y. Zhao, “Freeze-Derived Anisotropic Porous Microparticles for Engineered Mesenchymal Stem Cell Loading and Wound Healing,” Research 8 (2025): 0668.

[40] D. Peng, D. Deng, J. Lv, et al., “A Novel Macroporous Carboxymethyl Chitosan/Sodium Alginate Sponge Dressing Capable of Rapid Hemostasis and Drug Delivery,” International Journal of Biological Macromolecules 278 (2024): 134943.

[41] S. Guan, B. Xu, Y. Yang, et al., “Gold Nanowire Aerogel-Based Biosensor for Highly Sensitive Ethanol Detection in Simulated Sweat,” ACS Applied Nano Materials 5 (2022): 11091–11099.

[42] L. Li, Z. Ai, J. Wu, et al., “A Robust Polyaniline Hydrogel Electrode Enables Superior Rate Capability at Ultrahigh Mass Loadings,” Nature Communications 15 (2024): 6591.

[43] F. Diaz, N. Forsyth, and A. R. Boccaccini, “Aligned Ice Templated Biomaterial Strategies for the Musculoskeletal System,” Advanced Healthcare Materials 12 (2023): 2203205.

[44] Y. Xu, J. Tan, W. Dong, et al., “Super Strong and Tough Hydrogels Constructed via Network Uniformization of Macromolecular Chains,” Advanced Functional Materials 35 (2024): 2419161.

[45] S. Deville, E. Saiz, R. K. Nalla, and A. P. Tomsia, “Freezing as a Path to Build Complex Composites,” Science 311 (2006): 515–518.

[46] X. Liang, G. Chen, I. M. Lei, et al., “Impact-Resistant Hydrogels by Harnessing 2D Hierarchical Structures,” Advanced Materials 35 (2023): 2207587.

[47] X. Liang, G. Chen, S. Lin, et al., “Anisotropically Fatigue-Resistant Hydrogels,” Advanced Materials 33 (2021): 2102011.

[48] Z. L. Yu, B. Qin, Z. Y. Ma, et al., “Superelastic Hard Carbon Nanofiber Aerogels,” Advanced Materials 31 (2019): 1900651.

[49] Z. L. Yu, B. Qin, Z. Y. Ma, et al., “Emerging Bioinspired Artificial Woods,” Advanced Materials 33 (2021): 2001086.

[50] D. Li, X. Bu, Z. Xu, Y. Luo, and H. Bai, “Bioinspired Multifunctional Cellular Plastics With a Negative Poisson's Ratio for High-Energy Dissipation,” Advanced Materials 32 (2020): 2001222.

[51] K. Wu, L. Zhang, Y. Yuan, et al., “An Iron-Decorated Carbon Aerogel for Rechargeable Flow and Flexible Zn–Air Batteries,” Advanced Materials 32 (2020): 2002292.

[52] Y. Zhou, Y. Wang, M. Li, et al., “Ultra-High Thermal Conductivity Multifunctional Composites With Uniaxially Oriented Boron Nitride Sheets for Future Wireless Charging Technology,” Advanced Composites and Hybrid Materials 8 (2025): 237.

[53] Z. Chen, J. Wang, X. Liu, et al., “Crafting Hollow Spheres via Bulk Ice Melting With ppb-Level Gas Sensing Performance,” Journal of the American Chemical Society 147 (2025): 3478–3487.

[54] C. Cai, Y. Chen, F. Cheng, Z. Wei, W. Zhou, and Y. Fu, “Biomimetic Dual Absorption–Adsorption Networked MXene Aerogel-Pump for Integrated Water Harvesting and Power Generation System,” ACS Nano 18 (2024): 4376–4387.

[55] E. Munch, M. E. Launey, D. H. Alsem, E. Saiz, A. P. Tomsia, and R. O. Ritchie, “Tough, Bio-Inspired Hybrid Materials,” Science 322 (2008): 1516–1520.

[56] S. Miao, Y. Wang, M. Lu, X. Liu, Y. Chen, and Y. Zhao, “Freezing-Derived Functional Materials,” Materials Today 74 (2024): 235–268.

[57] Y. Cao, L. Lewis, W. Y. Hamad, and M. J. MacLachlan, “Pressure-Responsive Hierarchical Chiral Photonic Aerogels,” Advanced Materials 31 (2019): 1808186.

[58] N. Zhao, M. Li, H. Gong, and H. Bai, “Controlling Ice Formation on Gradient Wettability Surface for High-Performance Bioinspired Materials,” Science Advances 6 (2020): eabb4712.

[59] H. Bai, Y. Chen, B. Delattre, A. P. Tomsia, and R. O. Ritchie, “Bioinspired Large-Scale Aligned Porous Materials Assembled With Dual Temperature Gradients,” Science Advances 1 (2015): e1500849.

[60] A. Garg, S. S. Yerneni, P. Campbell, P. R. LeDuc, and O. B. Ozdoganlar, “Freeform 3D Ice Printing (3D-ICE) at the Micro Scale,” Advanced Science 9 (2022): 2201566.

[61] W. Yang, J. Yang, J. J. Byun, et al., “3D Printing of Freestanding MXene Architectures for Current-Collector-Free Supercapacitors,” Advanced Materials 31 (2019): 1902725.

[62] S. Miao, X. Liu, and Y. Chen, “Freezing as a Path to Build Micro-Nanostructured Icephobic Coatings,” Advanced Functional Materials 33 (2023): 2212245.

[63] B. D. Mattos, Y. Zhu, B. L. Tardy, et al., “Versatile Assembly of Metal–Phenolic Network Foams Enabled by Tannin–Cellulose Nanofibers,” Advanced Materials 35 (2023): 2209685.

[64] Z. Lin, J. Dong, X. Wang, et al., “Twin-Structured Graphene Metamaterials With Anomalous Mechanical Properties,” Advanced Materials 34 (2022): 2200444.

[65] N. Baccile, G. Ben Messaoud, T. Zinn, and F. M. Fernandes, “Soft Lamellar Solid Foams From Ice-Templating of Self-Assembled Lipid Hydrogels: Organization Drives the Mechanical Properties,” Materials Horizons 6 (2019): 2073–2086.

[66] A. Knöeller, S. Kilper, A. M. Diem, et al., “Ultrahigh Damping Capacities in Lightweight Structural Materials,” Nano Letters 18 (2018): 2519–2524.

[67] Z. Zeng, H. Jin, M. Chen, et al., “Microstructure Design of Lightweight, Flexible, and High Electromagnetic Shielding Porous Multiwalled Carbon Nanotube/Polymer Composites,” Small 13 (2017): 1701388.

[68] P. Xue, S. Liu, X. Shi, et al., “A Hierarchical Silver-Nanowire-Graphene Host Enabling Ultrahigh Rates and Superior Long-Term Cycling of Lithium-Metal Composite Anodes,” Advanced Materials 30 (2018): 1804165.

[69] J. Yang, L. S. Tang, R. Y. Bao, et al., “An Ice-Templated Assembly Strategy to Construct Graphene Oxide/Boron Nitride Hybrid Porous Scaffolds in Phase Change Materials With Enhanced Thermal Conductivity and Shape Stability for Light–Thermal–Electric Energy Conversion,” Journal of Materials Chemistry A 4 (2016): 18841–18851.

[70] X. Li, Z. Yang, Y. Peng, et al., “Self-Powered Aligned Porous Superhydrophobic Sponge for Selective and Efficient Absorption of Highly Viscous Spilled Oil,” Journal of Hazardous Materials 435 (2022): 129018.

[71] S. Wu, R. B. Ladani, J. Zhang, et al., “Strain Sensors With Adjustable Sensitivity by Tailoring the Microstructure of Graphene Aerogel/PDMS Nanocomposites,” ACS Applied Materials & Interfaces 8 (2016): 24853–24861.

[72] L. Qiu, J. Z. Liu, S. L. Y. Chang, Y. Wu, and D. Li, “Biomimetic Superelastic Graphene-Based Cellular Monoliths,” Nature Communications 3 (2012): 1241.

[73] G. Wang, J. Feng, Z. Zhou, et al., “Low-Cost Hyperelastic Fuller-Dome-Structured Nanocellulose Aerogels by Dual Templates for Personal Thermal Management,” Advanced Materials 37 (2025): 2414896.

[74] A. Gondolini, E. Mercadelli, S. Casadio, and A. Sanson, “Freeze Cast Support for Hydrogen Separation Membrane,” Journal of the European Ceramic Society 42 (2022): 1053–1060.

[75] L. Su, H. Wang, M. Niu, et al., “Anisotropic and Hierarchical SiC@SiO2 Nanowire Aerogel With Exceptional Stiffness and Stability for Thermal Superinsulation,” Science Advances 6 (2020): eaay6689.

[76] Y. Cui, H. Gong, Y. Wang, D. Li, and H. Bai, “A Thermally Insulating Textile Inspired by Polar Bear Hair,” Advanced Materials 30 (2018): 1706807.

[77] Y. Wang, Y. Cui, Z. Shao, et al., “Multifunctional Polyimide Aerogel Textile Inspired by Polar Bear Hair for Thermoregulation in Extreme Environments,” Chemical Engineering Journal 390 (2020): 124623.

[78] Z. Shao, Y. Wang, and H. Bai, “A Superhydrophobic Textile Inspired by Polar Bear Hair for Both in Air and Underwater Thermal Insulation,” Chemical Engineering Journal 397 (2020): 125441.

[79] S. Barg, F. M. Perez, N. Ni, et al., “Mesoscale Assembly of Chemically Modified Graphene Into Complex Cellular Networks,” Nature Communications 5 (2014): 4328.

[80] Y. C. Yin, Z. L. Yu, Z. Y. Ma, et al., “Bio-Inspired Low-Tortuosity Carbon Host for High-Performance Lithium-Metal Anode,” National Science Review 6 (2019): 247–256.

[81] J. Han, J. Yang, W. Gao, and H. Bai, “Ice-Templated, Large-Area Silver Nanowire Pattern for Flexible Transparent Electrode,” Advanced Functional Materials 31 (2021): 2010155.

[82] Z. L. Yu, N. Yang, L. C. Zhou, et al., “Bioinspired Polymeric Woods,” Science Advances 4 (2018): eaat7223.

[83] Y. Cui, Y. Wang, Z. Shao, A. Mao, W. Gao, and H. Bai, “Smart Sponge for Fast Liquid Absorption and Thermal Responsive Self-Squeezing,” Advanced Materials 32 (2020): 1908249.

[84] Z. Xu, M. Wu, W. Gao, and H. Bai, “A Sustainable Single-Component Silk Nacre,” Science Advances 8 (2022): eabo0946.

[85] L. B. Mao, H. L. Gao, H. B. Yao, et al., “Synthetic Nacre by Predesigned Matrix-Directed Mineralization,” Science 354 (2016): 107–110.

[86] C. Yang, H. Wang, J. Bai, et al., “Transfer Learning Enhanced Water-Enabled Electricity Generation in Highly Oriented Graphene Oxide Nanochannels,” Nature Communications 13 (2022): 6819.

[87] Z. Ju, S. Checko, X. Xu, et al., “Densified Vertically Lamellar Electrode Architectures for Compact Energy Storage,” Proceedings of the National Academy of Sciences of the United States of America 120 (2023): e2308009120.

[88] H. L. Gao, Y. B. Zhu, L. B. Mao, et al., “Super-Elastic and Fatigue Resistant Carbon Material With Lamellar Multi-Arch Microstructure,” Nature Communications 7 (2016): 12920.

[89] Y. Si, X. Wang, L. Dou, J. Yu, and B. Ding, “Ultralight and Fire-Resistant Ceramic Nanofibrous Aerogels With Temperature-Invariant Superelasticity,” Science Advances 4 (2018): eaas8925.

[90] Z. Sun, S. Tian, Z. Guo, et al., “Multi-Stage Anisotropic Cellulose-Based Aerogels via “Foam-Flake-Fiber” Interweaving for Versatile Microwave Absorbers,” Advanced Functional Materials 35 (2025): 2508255.

[91] X. Sun, R. F. Guo, A. Shaga, et al., “Preparation and Characterization of High Damage-Tolerance Nacre-Inspired Magnesium Alloy Matrix Composites With High Carbon Nanotube Contents,” Carbon 162 (2020): 382–391.

[92] G. Du, A. Mao, J. Yu, et al., “Nacre-Mimetic Composite With Intrinsic Self-Healing and Shape-Programming Capability,” Nature Communications 10 (2019): 800.

[93] Z. Bo, H. Zhu, C. Ying, et al., “Tree-Inspired Radially Aligned, Bimodal Graphene Frameworks for Highly Efficient and Isotropic Thermal Transport,” Nanoscale 11 (2019): 21249–21258.

[94] L. Fan, J. L. Li, Z. Cai, and X. Wang, “Creating Biomimetic Anisotropic Architectures With Co-Aligned Nanofibers and Macrochannels by Manipulating Ice Crystallization,” ACS Nano 12 (2018): 5780–5790.

[95] D. D. Athayde, B. M. Sousa, A. C. A. Dolabella, et al., “Manufacture of Highly Porous Tubular Alumina Substrates With Anisotropic Pore Structure by Freeze-Casting,” Advanced Engineering Materials 22 (2020): 1901432.

[96] H. Bai, D. Wang, B. Delattre, et al., “Biomimetic Gradient Scaffold From Ice-Templating for Self-Seeding of Cells With Capillary Effect,” Acta Biomaterialia 20 (2015): 113–119.

[97] C. Wang, X. Chen, B. Wang, et al., “Freeze-Casting Produces a Graphene Oxide Aerogel With a Radial and Centrosymmetric Structure,” ACS Nano 12 (2018): 5816–5825.

[98] S. Zhang, C. Zhang, S. Wu, X. Zhou, Z. He, and J. Wang, “Ion-Specific Effects on the Growth of Single Ice Crystals,” Journal of Physical Chemistry Letters 12 (2021): 8726–8731.

[99] S. Wu, L. Li, H. Xue, et al., “Size Controllable, Transparent, and Flexible 2D Silver Meshes Using Recrystallized Ice Crystals as Templates,” ACS Nano 11 (2017): 9898–9905.

[100] S. Wu, C. Zhu, Z. He, et al., “Ion-Specific Ice Recrystallization Provides a Facile Approach for the Fabrication of Porous Materials,” Nature Communications 8 (2017): 15154.

[101] X. Shan, Z. Yin, Y. Jia, et al., “Ion-Regulated Water Activation in Plasmonic Aerogels for Highly Efficient and Salt-Resistive Solar Desalination,” Advanced Functional Materials 36 (2025): e14279.

[102] X. Song, H. Tetik, T. Jirakittsonthon, et al., “Biomimetic 3D Printing of Hierarchical and Interconnected Porous Hydroxyapatite Structures With High Mechanical Strength for Bone Cell Culture,” Advanced Engineering Materials 21 (2019): 1800678.

[103] Y. W. Moon, I. J. Choi, Y. H. Koh, and H. E. Kim, “Macroporous Alumina Scaffolds Consisting of Highly Microporous Hollow Filaments Using Three-Dimensional Ceramic/Camphene-Based Co-Extrusion,” Journal of the European Ceramic Society 35 (2015): 4623–4627.

[104] H. Tetik, J. Orangi, G. Yang, et al., “3D Printed MXene Aerogels With Truly 3D Macrostructure and Highly Engineered Microstructure for Enhanced Electrical and Electrochemical Performance,” Advanced Materials 34 (2022): 2104980.

[105] Q. Zhang, F. Zhang, S. P. Medarametla, H. Li, C. Zhou, and D. Lin, “3D Printing of Graphene Aerogels,” Small 12 (2016): 1702–1708.

[106] G. Shi, Y. Zhu, M. Batmunkh, et al., “Cytomembrane-Inspired MXene Ink With Amphiphilic Surfactant for 3D Printed Microsupercapacitors,” ACS Nano 16 (2022): 14723–14736.

[107] G. Jia, X. Yue, L. Duan, et al., “Biomimetic Gradient Fibrous Aerogel Pressure Sensor Featuring Ultrawide Sensitive Range and Extraordinary Pressure Resolution for Machine Learning Enabled Posture Recognition,” Advanced Fiber Materials 7 (2025): 1632–1647.

[108] H. Adelnia, R. Ensandoost, S. S. Moonshi, J. N. Gavgani, E. I. Vasafi, and H. T. Ta, “Freeze/Thawed Polyvinyl Alcohol Hydrogels: Present, Past and Future,” European Polymer Journal 164 (2022): 110974.

[109] J. Xiao, Y. Zhou, M. Ye, et al., “Freeze-Thawing Chitosan/Ions Hydrogel Coated Gauzes Releasing Multiple Metal Ions on Demand for Improved Infected Wound Healing,” Advanced Healthcare Materials 10 (2021): 2001591.

[110] T. Luan, L. Wu, H. Zhang, and Y. Wang, “A Study on the Nature of Intermolecular Links in the Cryotropic Weak Gels of Hyaluronan,” Carbohydrate Polymers 87 (2012): 2076–2085.

[111] C. Cao and Y. Li, “Highly Stretchable Calcium Ion/Polyacrylic Acid Hydrogel Prepared by Freezing–Thawing,” Journal of Materials Science 55 (2020): 5340–5348.

[112] L. Ning, J. Zhou, T. Xue, et al., “Freeze-Thawed Polyacrylamide-Polyvinyl Alcohol Double Network With Enhanced Mechanical Properties as Hydrogel Electrolyte for Zinc-Ion Battery,” Journal of Energy Storage 74 (2023): 109508.

[113] X. Dong, X. Guo, Q. Liu, Y. Zhao, H. Qi, and W. Zhai, “Strong and Tough Conductive Organo-Hydrogels via Freeze-Casting Assisted Solution Substitution,” Advanced Functional Materials 32 (2022): 2203610.

[114] X. Dong, X. Guo, Q. Liu, et al., “An Organo-Hydrogel With Extreme Mechanical Performance and Tolerance Beyond Skin,” Materials Today 72 (2024): 25–35.

[115] X. Guo, X. Dong, G. Zou, et al., “Multiscale Toughening Mechanisms in Biomimetic Tendon-Like Hydrogels,” Proceedings of the National Academy of Sciences of the United States of America 122 (2025): e2424124122.

[116] S. A. Bernal-Chávez, S. Alcalá-Alcalá, Y. S. Tapia-Guerrero, J. J. Magaña, M. L. Del Prado-Audelo, and G. Leyva-Gómez, “Cross-Linked Polyvinyl Alcohol-Xanthan Gum Hydrogel Fabricated by Freeze/Thaw Technique for Potential Application in Soft Tissue Engineering,” RSC Advances 12 (2022): 21713–21724.

[117] J. Su, Z. Niu, Y. Hu, et al., “Superelastic Triboelectric Aerogel Enabled by Cross-Scale Fibers and Heterojunction Particles for Wearable Intelligent Neck Guard,” Advanced Functional Materials 36 (2025): e15065.

[118] M. Li, N. Zhao, M. Wang, X. Dai, and H. Bai, “Conch-Shell-Inspired Tough Ceramic,” Advanced Functional Materials 32 (2022): 2205309.

[119] C. Cai, T. Liu, X. Meng, et al., “Lightweight and Mechanically Robust Cellulosic Triboelectric Materials for Wearable Self-Powered Rehabilitation Training,” ACS Nano 19 (2025): 396–405.

[120] Y. Wang, H. Qin, Z. Li, J. Dai, H. P. Cong, and S. H. Yu, “Highly Compressible and Environmentally Adaptive Conductors With High-Tortuosity Interconnected Cellular Architecture,” Nature Synthesis 1 (2022): 975–986.

[121] B. Yu, Z. Sun, Y. Liu, Z. Zhang, Y. Wu, and F. Zhou, “Improving Anti-Icing and De-Icing Performances via Thermal-Regulation With Macroporous Xerogel,” ACS Applied Materials & Interfaces 13 (2021): 37609–37616.

[122] D. Chen, Y. Zhang, C. Ni, et al., “Drilling by Light: Ice-Templated Photo-Patterning Enabled by a Dynamically Crosslinked Hydrogel,” Materials Horizons 6 (2019): 1013–1019.

[123] M. Barrow, A. Eltmimi, A. Ahmed, P. Myers, and H. Zhang, “Frozen Polymerization for Aligned Porous Structures With Enhanced Mechanical Stability, Conductivity, and as Stationary Phase for HPLC,” Journal of Materials Chemistry 22 (2012): 11615–11620.

[124] H. Bai, A. Polini, B. Delattre, and A. P. Tomsia, “Thermoresponsive Composite Hydrogels With Aligned Macroporous Structure by Ice-Templated Assembly,” Chemistry of Materials 25 (2013): 4551–4556.

[125] S. Miao, Y. Wang, L. Sun, and Y. Zhao, “Freeze-Derived Heterogeneous Structural Color Films,” Nature Communications 13 (2022): 4044.

[126] Y. Song, X. Song, X. Wang, et al., “Two-Dimensional Metal–Organic Framework Superstructures From Ice-Templated Self-Assembly,” Journal of the American Chemical Society 144 (2022): 17457–17467.

[127] H. Ma, Y. Gao, Y. Li, et al., “Ice-Templating Synthesis of Polyaniline Microflakes Stacked by One-Dimensional Nanofibers,” Journal of Physical Chemistry C 113 (2009): 9047–9052.

[128] I. Y. Choi, J. Lee, H. Ahn, J. Lee, H. C. Choi, and M. J. Park, “High-Conductivity Two-Dimensional Polyaniline Nanosheets Developed on Ice Surfaces,” Angewandte Chemie International Edition 54 (2015): 10497–10501.

[129] Y. Zhang, H. Wang, J. Guo, et al., “Ice-Confined Synthesis of Highly Ionized 3D-Quasilayered Polyamide Nanofiltration Membranes,” Science 382 (2023): 202–206.

[130] H. Wei, K. Huang, L. Zhang, et al., “Ice Melting to Release Reactants in Solution Syntheses,” Angewandte Chemie 130 (2018): 3412–3417.

[131] L. Zhou, Y. Tan, J. Wang, et al., “3D Self-Assembly of Aluminium Nanoparticles for Plasmon-Enhanced Solar Desalination,” Nature Photonics 10 (2016): 393–398.

[132] H. Zhou, L. Han, M. Yang, et al., “Architecting Janus Hydrogel-Fabric Coupled Evaporator for Eliminating Salt Accumulation and Highly Efficient Solar-Driven Brine Desalination,” Desalination 556 (2023): 116567.

[133] X. Han, S. Ding, L. Fan, Y. Zhou, and S. Wang, “Janus Biocomposite Aerogels Constituted of Cellulose Nanofibrils and MXenes for Application as Single-Module Solar-Driven Interfacial Evaporators,” Journal of Materials Chemistry A 9 (2021): 18614–18622.

[134] Y. Tian, X. Liu, S. Xu, et al., “Recyclable and Efficient Ocean Biomass-Derived Hydrogel Photothermal Evaporator for Thermally-Localized Solar Desalination,” Desalination 523 (2022): 115449.

[135] W. Gao, Z. Lei, W. Chen, and Y. Chen, “Hierarchically Anisotropic Networks to Decouple Mechanical and Ionic Properties for High-Performance Quasi-Solid Thermocells,” ACS Nano 16 (2022): 8347–8357.

[136] J. Wang, W. Zhang, and C. Zhang, “Versatile Fabrication of Anisotropic and Superhydrophobic Aerogels for Highly Selective Oil Absorption,” Carbon 155 (2019): 16–24.

[137] X. Zhang, Y. Lei, C. Li, G. Sun, and B. You, “Superhydrophobic and Multifunctional Aerogel Enabled by Bioinspired Salvinia Leaf-Like Structure,” Advanced Functional Materials 32 (2022): 2110830.

[138] J. Li, S. Chen, X. Li, et al., “Anisotropic Cellulose Nanofibril Aerogels Fabricated by Directional Stabilization and Ambient Drying for Efficient Solar Evaporation,” Chemical Engineering Journal 453 (2023): 139844.

[139] Y. Ni, X. Zhou, J. Gong, L. Xue, and Q. Zhao, “Lyophilization-Free Engineering of Polyelectrolyte Monolith by an Ice-Dissolving-Complexation Method,” Advanced Functional Materials 31 (2021): 2103818.

[140] J. Feng, Y. Zhou, Z. Zhuang, H. Xiong, and C. Li, “Superstrong Alginate Aerogels,” Advanced Functional Materials 35 (2025): 2501094.

[141] Y. Du, B. Wu, R. Xia, and J. Qian, “Thermally Conductive Epoxy Composites With Efficient Heat Transfer Pathways by In-Situ Growth of CNTs on Oriented BNNS,” Composites Communications 41 (2023): 101636.

[142] Y. C. Gao, B. Qin, S. M. Wen, et al., “Ambient Pressure Drying of Freeze-Cast Ceramics From Aqueous Suspension,” Nano Letters 23 (2023): 9011–9019.

[143] J. M. Holzwarth and P. X. Ma, “Biomimetic Nanofibrous Scaffolds for Bone Tissue Engineering,” Biomaterials 32 (2011): 9622–9629.

[144] M. Yang, Y. Shuai, K. S. Sunderland, and C. Mao, “Ice-Templated Protein Nanoridges Induce Bone Tissue Formation,” Advanced Functional Materials 27 (2017): 1703726.

[145] L. Zhang, Y. Shang, J. Gan, Z. Wu, and Y. Zhao, “Engineering Biomimetic Scaffolds for Cultivated Meats,” Biomedical Technology 12 (2025): 100113.

[146] S. Cao, S. Wu, X. Dong, et al., “Biosafe Saccharomyces Cerevisiae Immobilized Nanofibrous Aerogels for Integrated Lead Removal in Human Body,” Advanced Functional Materials 33 (2023): 2215059.

[147] L. Qi, L. Mu, X. Guo, et al., “Fast Expandable Chitosan-Fibers Cryogel From Ambient Drying for Noncompressible Bleeding Control and In Situ Tissue Regeneration,” Advanced Functional Materials 33 (2023): 2212231.

[148] H. Maleki, M. A. Shahbazi, S. Montes, et al., “Mechanically Strong Silica-Silk Fibroin Bioaerogel: A Hybrid Scaffold With Ordered Honeycomb Micromorphology and Multiscale Porosity for Bone Regeneration,” ACS Applied Materials & Interfaces 11 (2019): 17256–17269.

[149] M. C. Serrano, S. Nardecchia, C. García-Rama, et al., “Chondroitin Sulphate-Based 3D Scaffolds Containing MWCNTs for Nervous Tissue Repair,” Biomaterials 35 (2014): 1543–1551.

[150] Z. Wang, C. Liu, Y. Xiao, et al., “Remodeling of a Cell-Free Vascular Graft With Nanolamellar Intima Into a Neovessel,” ACS Nano 13 (2019): 10576–10586.

[151] E. R. Shamir and A. J. Ewald, “Three-Dimensional Organotypic Culture: Experimental Models of Mammalian Biology and Disease,” Nature Reviews Molecular Cell Biology 15 (2014): 647–664.

[152] N. Davidenko, J. J. Campbell, E. S. Thian, C. J. Watson, and R. E. Cameron, “Collagen–Hyaluronic Acid Scaffolds for Adipose Tissue Engineering,” Acta Biomaterialia 6 (2010): 3957–3968.

[153] L. Figueiredo, R. Pace, C. D'Arros, et al., “Assessing Glucose and Oxygen Diffusion in Hydrogels for the Rational Design of 3D Stem Cell Scaffolds in Regenerative Medicine,” Journal of Tissue Engineering and Regenerative Medicine 12 (2018): 1238–1246.

[154] K. Qin, C. Parisi, and F. M. Fernandes, “Recent Advances in Ice Templating: From Biomimetic Composites to Cell Culture Scaffolds and Tissue Engineering,” Journal of Materials Chemistry B 9 (2021): 889–907.

[155] K. M. Pawelec, A. Husmann, S. M. Best, and R. E. Cameron, “A Design Protocol for Tailoring Ice-Templated Scaffold Structure,” Journal of the Royal Society Interface 11 (2014): 20130958.

[156] M. Maher, M. Castilho, Z. Yue, et al., “Shaping Collagen for Engineering Hard Tissues: Towards a Printomics Approach,” Acta Biomaterialia 131 (2021): 41–61.

[157] A. Dewle, N. Pathak, P. Rakshasmare, and A. Srivastava, “Multifarious Fabrication Approaches of Producing Aligned Collagen Scaffolds for Tissue Engineering Applications,” ACS Biomaterials Science & Engineering 6 (2020): 779–797.

[158] D. Yang, Z. Zhao, F. Bai, S. Wang, A. P. Tomsia, and H. Bai, “Promoting Cell Migration in Tissue Engineering Scaffolds With Graded Channels,” Advanced Healthcare Materials 6 (2017): 1700472.

[159] P. Beri, B. F. Matte, L. Fattet, D. Kim, J. Yang, and A. J. Engler, “Biomaterials to Model and Measure Epithelial Cancers,” Nature Reviews Materials 3 (2018): 418–430.

[160] J. J. Campbell, A. Husmann, R. D. Hume, C. J. Watson, and R. E. Cameron, “Development of Three-Dimensional Collagen Scaffolds With Controlled Architecture for Cell Migration Studies Using Breast Cancer Cell Lines,” Biomaterials 114 (2017): 34–43.

[161] H. H. Oh, Y. G. Ko, H. Lu, N. Kawazoe, and G. Chen, “Preparation of Porous Collagen Scaffolds With Micropatterned Structures,” Advanced Materials 24 (2012): 4311–4316.

[162] C. Rieu, C. Parisi, G. Mosser, et al., “Topotactic Fibrillogenesis of Freeze-Cast Microridged Collagen Scaffolds for 3D Cell Culture,” ACS Applied Materials & Interfaces 11 (2019): 14672–14683.

[163] Z. Zhao, Z. K. Moay, H. Y. Lai, et al., “Characterization of Anisotropic Human Hair Keratin Scaffolds Fabricated via Directed Ice Templating,” Macromolecular Bioscience 21 (2021): 2000314.

[164] W. Zhang, L. Cai, J. Gan, and Y. Zhao, “Photothermal Responsive Porous Hollow Microneedles as Chinese Medicine Versatile Delivery System for Wound Healing,” Smart Medicine 3 (2024): e20240007.

[165] X. Zhu, L. Cai, Y. Wang, H. Chen, C. Yu, and Y. Zhao, “Pollen Integrated Hydrogel Patches With Hierarchical Structures and Spatio-Temporal Actives Release for Wound Healing,” Smart Medicine 4 (2025): e70017.

[166] N. Li, H. Chen, D. Xu, and Y. Zhao, “Bio-Inspired Hierarchical Particles for Bioassays,” Biomedical Technology 6 (2024): 17–25.

[167] Y. Fang, L. Ouyang, T. Zhang, C. Wang, B. Lu, and W. Sun, “Optimizing Bifurcated Channels Within an Anisotropic Scaffold for Engineering Vascularized Oriented Tissues,” Advanced Healthcare Materials 9 (2020): 2000782.

[168] J. V. John, A. McCarthy, H. Wang, et al., “Freeze-Casting With 3D-Printed Templates Creates Anisotropic Microchannels and Patterned Macrochannels Within Biomimetic Nanofiber Aerogels for Rapid Cellular Infiltration,” Advanced Healthcare Materials 10 (2021): 2100238.

[169] Y. Liu, K. Yuan, Y. Lin, et al., “Directional Freeze-Casting Cryogel Loaded With Quaternized Chitosan Modified Gallium Metal–Organic Frameworks to Capture and Eradicate the Resistant Bacteria for Guided Regeneration in Infected Bone Defects,” Advanced Materials 37 (2025): 2414437.

[170] Y. Shuai, T. Yang, M. Zheng, et al., “Oriented Cortical-Bone-Like Silk Protein Lamellae Effectively Repair Large Segmental Bone Defects in Pigs,” Advanced Materials 37 (2025): 2414543.

[171] Z. Yuan, X. Yuan, Y. Zhao, et al., “Injectable GelMA Cryogel Microspheres for Modularized Cell Delivery and Potential Vascularized Bone Regeneration,” Small 17 (2021): 2006596.

[172] X. Feng, P. Xu, T. Shen, Y. Zhang, J. Ye, and C. Gao, “Influence of Pore Architectures of Silk Fibroin/Collagen Composite Scaffolds on the Regeneration of Osteochondral Defects In Vivo,” Journal of Materials Chemistry B 8 (2020): 391–405.

[173] Z. Xia, X. Yu, X. Jiang, H. D. Brody, D. W. Rowe, and M. Wei, “Fabrication and Characterization of Biomimetic Collagen–Apatite Scaffolds With Tunable Structures for Bone Tissue Engineering,” Acta Biomaterialia 9 (2013): 7308–7319.

[174] S. J. Jiang, M. H. Wang, Z. Y. Wang, et al., “Radially Porous Nanocomposite Scaffolds With Enhanced Capability for Guiding Bone Regeneration In Vivo,” Advanced Functional Materials 32 (2022): 2110931.

[175] D. Xu, H. Zhang, Y. Wang, et al., “Piezoelectric Biomaterials for Neural Tissue Engineering,” Smart Medicine 2 (2023): e20230002.

[176] E. Serger, L. Luengo-Gutierrez, J. S. Chadwick, et al., “The Gut Metabolite Indole-3 Propionate Promotes Nerve Regeneration and Repair,” Nature 607 (2022): 585–592.

[177] H. Zhang, J. Guo, Y. Wang, L. Shang, R. Chai, and Y. Zhao, “Natural Polymer-Derived Bioscaffolds for Peripheral Nerve Regeneration,” Advanced Functional Materials 32 (2022): 2203829.

[178] W. Zhou, M. S. U. Rahman, C. Sun, et al., “Perspectives on the Novel Multifunctional Nerve Guidance Conduits: From Specific Regenerative Procedures to Motor Function Rebuilding,” Advanced Materials 36 (2024): 2307805.

[179] M. Zhang, H. An, Z. Gu, et al., “Mimosa-Inspired Stimuli-Responsive Curling Bioadhesive Tape Promotes Peripheral Nerve Regeneration,” Advanced Materials 35 (2023): 2212015.

[180] Y. Qian, H. Lin, Z. Yan, J. Shi, and C. Fan, “Functional Nanomaterials in Peripheral Nerve Regeneration: Scaffold Design, Chemical Principles and Microenvironmental Remodeling,” Materials Today 51 (2021): 165–187.

[181] B. Xia, X. Gao, J. Qian, et al., “A Novel Superparamagnetic Multifunctional Nerve Scaffold: A Remote Actuation Strategy to Boost In Situ Extracellular Vesicles Production for Enhanced Peripheral Nerve Repair,” Advanced Materials 36 (2024): 2305374.

[182] H. Zhang, K. Wang, D. Xu, et al., “Conductive Nerve Conduits With Orientated Topological Structures From Ice-Templating Technology,” Smart Medicine 4 (2025): e70012.

[183] K. Yin, P. Divakar, J. Hong, et al., “Freeze-Cast Porous Chitosan Conduit for Peripheral Nerve Repair,” MRS Advances 3 (2018): 1677–1683.

[184] S. L. Lindsay, G. A. McCanney, A. G. Willison, and S. C. Barnett, “Multi-Target Approaches to CNS Repair: Olfactory Mucosa-Derived Cells and Heparan Sulfates,” Nature Reviews Neurology 16 (2020): 229–240.

[185] W. Wu, S. Jia, H. Xu, et al., “Supramolecular Hydrogel Microspheres of Platelet-Derived Growth Factor Mimetic Peptide Promote Recovery From Spinal Cord Injury,” ACS Nano 17 (2023): 3818–3837.

[186] T. Yuan, W. Li, M. Zhou, X. Wang, B. Wang, and Y. Zhao, “Biomimetic Multichannel Silk Nerve Conduits With Multicellular Spatiotemporal Distributions for Spinal Cord Injury Repair,” Advanced Materials 36 (2024): 2411628.

[187] H. Zhang, D. Xu, Y. Zhang, M. Li, and R. Chai, “Silk Fibroin Hydrogels for Biomedical Applications,” Smart Medicine 1 (2022): e20220011.

[188] J. Wang, D. Huang, H. Ren, and L. Shang, “Biomimic Trained Immunity-MSCs Delivery Microcarriers for Acute Liver Failure Regeneration,” Small 18 (2022): 2200858.

[189] X. Lin, J. Li, J. Wang, A. M. Filppula, H. Zhang, and Y. Zhao, “Ion-Specific Hydrogel Microcarriers With Biomimetic Niches for Bioartifical Liver System,” Advanced Functional Materials 34 (2024): 2402999.

[190] H. Lagus, M. Sarlomo-Rikala, T. Böhling, and J. Vuola, “Prospective Study on Burns Treated With Integra®, a Cellulose Sponge and Split Thickness Skin Graft: Comparative Clinical and Histological study—Randomized Controlled Trial,” Burns 39 (2013): 1577–1587.

[191] D. K. Chang, M. R. Louis, A. Gimenez, and E. M. Reece, “The Basics of Integra Dermal Regeneration Template and its Expanding Clinical Applications,” Seminars in Plastic Surgery 33 (2019): 185–189.

[192] J. H. Min, I. S. Yun, D. H. Lew, T. S. Roh, and W. J. Lee, “The Use of Matriderm and Autologous Skin Graft in the Treatment of Full Thickness Skin Defects,” Archives of Plastic Surgery 41 (2014): 330–336.

[193] H. Ryssel, E. Gazyakan, G. Germann, and M. Öhlbauer, “The Use of Matriderm in Early Excision and Simultaneous Autologous Skin Grafting in Burns—A Pilot Study,” Burns 34 (2008): 93–97.

[194] M. Geiger, R. H. Li, and W. Friess, “Collagen Sponges for Bone Regeneration With rhBMP-2,” Advanced Drug Delivery Reviews 55 (2003): 1613–1629.

[195] S. Govender, C. Csimma, H. K. Genant, et al., “Recombinant Human Bone Morphogenetic Protein-2 for Treatment of Open Tibial Fractures: A Prospective, Controlled, Randomized Study of Four Hundred and Fifty Patients,” JBJS 84 (2002): 2123–2134.

[196] F. Gottrup, B. M. Cullen, T. Karlsmark, M. Bischoff-Mikkelsen, L. Nisbet, and M. C. Gibson, “Randomized Controlled Trial on Collagen/Oxidized Regenerated Cellulose/Silver Treatment,” Wound Repair and Regeneration 21 (2013): 216–225.

[197] O. Kloeters, F. Unglaub, E. de Laat, M. van Abeelen, and D. Ulrich, “Prospective and Randomised Evaluation of the Protease-Modulating Effect of Oxidised Regenerated Cellulose/Collagen Matrix Treatment in Pressure Sore Ulcers,” International Wound Journal 13 (2016): 1231–1236.

[198] P. K. Narotam, S. José, N. Nathoo, C. Taylon, and Y. Vora, “Collagen Matrix (Duragen) in Dural Repair: Analysis of a New Modified Technique,” Spine 29 (2004): 2861–2867.

[199] J. H. Cheon, E. S. Yoon, J. W. Kim, S. H. Park, and B. I. Lee, “A Comparative Study Between Sterile Freeze-Dried and Sterile Pre-Hydrated Acellular Dermal Matrix in Tissue Expander/Implant Breast Reconstruction,” Archives of Plastic Surgery 46 (2019): 204–213.

[200] H. Yim, Y. S. Cho, C. H. Seo, et al., “The Use of Alloderm on Major Burn Patients: Alloderm Prevents Post-Burn Joint Contracture,” Burns 36 (2010): 322–328.

[201] I. V. Yannas, J. F. Burke, P. L. Gordon, C. Huang, and R. H. Rubenstein, “Design of an Artificial Skin. II. Control of Chemical Composition,” Journal of Biomedical Materials Research 14 (1980): 107–132.

Rights & permissions

2026 The Author(s). Smart Medicine published by Wiley-VCH GmbH on behalf of Wenzhou Institute, University of Chinese Academy of Sciences.