Readily prepared and processed multifunctional MXene nanocomposite hydrogels for smart electronics

Abstract

Booming sophisticated robotics and prosthetics put forward high requirements on soft conductive materials that can bridge electronics and biology, those soft conductive materials should imitate the mechanical properties of biological tissues and build information transmission networks. Until now, it remains a great challenge to handle the trade-off among ease of preparation, high conductivity, processability, mechanical adaptability, and external stimuli responsiveness. Herein, a kind of readily prepared and processed multifunctional MXene nanocomposite hydrogel is reported, which is prepared via the fast gelation of cationic monomer initiated by delaminated MXene sheets. The gelation time can be adjusted (several seconds to minutes) based on the MXene loadings. By adjusting the MXene ratio, the resulting nanocomposites are ultrastretchable (>5000%), three-dimensional (3D) printable, and show outstanding mechanical and electrical self-healing. As expected, the integration of multifunctional systems onto various substrates (e.g., gloves and masks) is further demonstrated via 3D printing and could achieve diverse sensory capabilities toward strain, pressure, and temperature, showing great prospects as smart flexible electronics.

Keywords

3D printable / electronics / MXene / polymeric hydrogels / stretchable and conductive

References

[1] Lei Z, Wu P. A highly transparent and ultra-stretchable conductor with stable conductivity during large deformation. Nat Commun. 2019;10(1):3429.

[2] Wang C, He K, Li J, Chen X. Conformal electrodes for on-skin digitalization. SmartMat. 2021;2(3):252-262.

[3] Choi S, Han SI, Kim D, Hyeon T, Kim D-H. High-performance stretchable conductive nanocomposites: materials, processes, and device applications. Chem Soc Rev. 2019;48(6):1566-1595.

[4] Wang S, Xu J, Wang W, et al. Skin electronics from scalable fabrication of an intrinsically stretchable transistor array. Nature. 2018;555(7694):83-88.

[5] Ding Q, Zhou Z, Wang H, et al. Self-healable, recyclable, ultrastretchable, and high-performance NO₂ sensors based on an organohydrogel for room and sub-zero temperature and wireless operation. SmartMat. 2023;4(1):e1141.

[6] Yao S, Ren P, Song R, et al. Nanomaterial-enabled flexible and stretchable sensing systems: processing, integration, and applications. Adv Mater. 2020;32(15):1902343.

[7] Kamyshny A, Magdassi S. Conductive nanomaterials for 2D and 3D printed flexible electronics. Chem Soc Rev. 2019;48(6):1712-1740.

[8] Zhang Y, Gong M, Wan P. MXene hydrogel for wearable electronics. Matter. 2021;4(8):2655-2658.

[9] Zhang D, Tang Y, Gong X, Chang Y, Zheng J. Highly conductive and tough double-network hydrogels for smart electronics. SmartMat. 2024;5:e1160.

[10] Huang Q, Zhu Y. Printing conductive nanomaterials for flexible and stretchable electronics: a review of materials, processes, and applications. Adv Mater Technol. 2019;4(5):1800546.

[11] Matsuhisa N, Inoue D, Zalar P, et al. Printable elastic conductors by in situ formation of silver nanoparticles from silver flakes. Nat Mater. 2017;16(8):834-840.

[12] Matsuhisa N, Kaltenbrunner M, Yokota T, et al. Printable elastic conductors with a high conductivity for electronic textile applications. Nat Commun. 2015;6(1):7461.

[13] Karagiannidis PG, Hodge SA, Lombardi L, et al. Microfluidization of graphite and formulation of graphene-based conductive inks. ACS Nano. 2017;11(3):2742-2755.

[14] Naguib M, Mochalin VN, Barsoum MW, Gogotsi Y. 25th anniversary article: MXenes: a new family of two-dimensional materials. Adv Mater. 2014;26(7):992-1005.

[15] Akuzum B, Maleski K, Anasori B, et al. Rheological characteristics of 2D titanium carbide (MXene) dispersions: a guide for processing MXenes. ACS Nano. 2018;12(3):2685-2694.

[16] Li Y, Huang S, Peng S, et al. Toward smart sensing by MXene. Small. 2023;19(14):2206126.

[17] Lee KH, Zhang Y-Z, Jiang Q, Kim H, Alkenawi AA, Alshareef HN. Ultrasound-driven two-dimensional Ti₃C₂T_x MXene hydrogel generator. ACS Nano. 2020;14(3):3199-3207.

[18] Wang Y, Wang Y. Recent progress in mxene layers materials for supercapacitors: high-performance electrodes. SmartMat. 2023;4(1):e1130.

[19] Yu Y, Yi P, Xu W, et al. Environmentally tough and stretchable mxene organohydrogel with exceptionally enhanced electromagnetic interference shielding performances. Nano Micro Lett. 2022;14(1):77.

[20] Boota M, Anasori B, Voigt C, Zhao MQ, Barsoum MW, Gogotsi Y. Pseudocapacitive electrodes produced by oxidant-free polymerization of pyrrole between the layers of 2D titanium carbide (MXene). Adv Mater. 2016;28(7):1517-1522.

[21] Qin L, Tao Q, Liu X, et al. Polymer-mxene composite films formed by MXene-facilitated electrochemical polymerization for flexible solid-state microsupercapacitors. Nano Energy. 2019;60:734-742.

[22] Liu Y, Dai Z, Zhang W, et al. Sulfonic-group-grafted Ti₃C₂T_x MXene: a silver bullet to settle the instability of polyaniline toward high-performance Zn-ion batteries. ACS Nano. 2021;15(5):9065-9075.

[23] Iqbal A, Sambyal P, Koo CM. 2D MXenes for electromagnetic shielding: a review. Adv Funct Mater. 2020;30(47):2000883.

[24] Zhang Y-Z, Lee KH, Anjum DH, et al. MXenes stretch hydrogel sensor performance to new limits. Sci Adv. 2018;4(6):eaat0098.

[25] Liu H, Du C, Liao L, et al. Approaching intrinsic dynamics of MXenes hybrid hydrogel for 3D printed multimodal intelligent devices with ultrahigh superelasticity and temperature sensitivity. Nat Commun. 2022;13(1):3420.

[26] Huang X, Wu P. A facile, high-yield, and freeze-and-thaw-assisted approach to fabricate MXene with plentiful wrinkles and its application in on-chip micro-supercapacitors. Adv Funct Mater. 2020;30(12):1910048.

[27] Liao C-A, Wu Q, Wei Q-C, Wang Q-G. Bioinorganic nanocomposite hydrogels formed by HRP-GOX-cascade-catalyzed polymerization and exfoliation of the layered composites. Chemistry - A European Journal. 2015;21(36):12620-12626.

[28] Zhang W, Wu B, Sun S, Wu P. Skin-like mechanoresponsive self-healing ionic elastomer from supramolecular zwitterionic network. Nat Commun. 2021;12(1):4082.

[29] Gong K, Hou L, Wu P. Hydrogen-bonding affords sustainable plastics with ultrahigh robustness and water-assisted arbitrarily shape engineering. Adv Mater. 2022;34(19):2201065.

[30] Tao N, Zhang D, Li X, et al. Near-infrared light-responsive hydrogels via peroxide-decorated MXene-initiated polymerization. Chem Sci. 2019;10(46):10765-10771.

[31] Li X, Liu F, Huang D, et al. Nonoxidized MXene quantum dots prepared by microexplosion method for cancer catalytic therapy. Adv Funct Mater. 2020;30(24):2000308.

[32] Liu J, Kong X, Li Y, et al. In situ synthesis of exfoliation TiO₂@C hybrids with enhanced photocatalytic hydrogen evolution activity. Appl Surf Sci. 2020;530:147283.

[33] Seredych M, Shuck CE, Pinto D, et al. High-temperature behavior and surface chemistry of carbide MXenes studied by thermal analysis. Chem Mater. 2019;31(9):3324-3332.

[34] Huang J, Huang X, Wu P. One stone for three birds: one-step engineering highly elastic and conductive hydrogel electronics with multilayer MXene as initiator, crosslinker and conductive filler simultaneously. Chem Eng J. 2021;428(15):132515.

[35] Scheibe B, Tadyszak K, Jarek M, et al. Study on the magnetic properties of differently functionalized multilayered Ti₃C₂T_x MXenes and Ti-Al-C carbides. Appl Surf Sci. 2019;479:216-224.

[36] Bandyopadhyay A, Ghosh D, Pati SK. Effects of point defects on the magnetoelectronic structures of MXenes from first principles. Phys Chem Chem Phys. 2018;20(6):4012-4019.

[37] Wang M, Cheng Y, Zhang H, et al. Nature-inspired interconnected macro/meso/micro-porous MXene electrode. Adv Funct Mater. 2023;33(12):2211199.

[38] Wei Z, Zhang H, Li A, et al. Construction of in-plane 3D network electrode strategy for promoting zinc ion storage capacity. Energy Storage Mater. 2023;55:754-762.

[39] Yue Y, Liu N, Su T, et al. Self-powered nanofluidic pressure sensor with a linear transfer mechanism. Adv Funct Mater. 2023;33(13):2211613.

[40] Zhang H, Wei Z, Wu J, et al. Interlayer-spacing-regulated MXene/rGO foam for multi-functional zinc-ion microcapacitors. Energy Storage Mater. 2022;50:444-453.

[41] Liu X, Steiger C, Lin S, et al. Ingestible hydrogel device. Nat Commun. 2019;10(1):493.

[42] Li Y, Yan J, Liu Y, Xie X-M. Super tough and intelligent multibond network physical hydrogels facilitated by Ti₃C₂T_x MXene nanosheets. ACS Nano. 2022;16(1):1567-1577.

[43] Zhao X, Xu J, Zhang J, et al. Fluorescent double network ionogels with fast self-healability and high resilience for reliable human motion detection. Materials Horizons. 2023;10(2):646-656.

[44] Xiang C, Wang Z, Yang C, Yao X, Wang Y, Suo Z. Stretchable and fatigue-resistant materials. Mater Today. 2020;34:7-16.

[45] Zhang W, Liu X, Wang J, et al. Fatigue of double-network hydrogels. Eng Fract Mech. 2018;187:74-93.

[46] Son D, Kang J, Vardoulis O, et al. An integrated self-healable electronic skin system fabricated via dynamic reconstruction of a nanostructured conducting network. Nat Nanotechnol. 2018;13(11):1057-1065.

[47] Li X, He L, Li Y, et al. Healable, degradable, and conductive mxene nanocomposite hydrogel for multifunctional epidermal sensors. ACS Nano. 2021;15(4):7765-7773.

[48] Zhao Z, Zhang L, Wu H. Hydro/organo/ionogels: “controllable” electromagnetic wave absorbers. Adv Mater. 2022;34(43):2205376.

[49] Lai D, Chen X, Wang G, Xu X, Wang Y. Arbitrarily reshaping and instantaneously self-healing graphene composite hydrogel with molecule polarization-enhanced ultrahigh electromagnetic interference shielding performance. Carbon. 2022;188:513-522.

[50] Lu Y, Qu X, Zhao W, et al. Highly stretchable, elastic, and sensitive mxene-based hydrogel for flexible strain and pressure sensors. Research. 2020;2020:2038560.

[51] Lou Z, Chen S, Wang L, et al. Ultrasensitive and ultraflexible e-skins with dual functionalities for wearable electronics. Nano Energy. 2017;38:28-35.

[52] Ding Q, Wang H, Zhou Z, et al. Stretchable, self-healable, and breathable biomimetic iontronics with superior humidity-sensing performance for wireless respiration monitoring. SmartMat. 2023;4(2):e1147.

[53] Chen Y, Liu F, Lu B, Zhang Y, Feng X. Skin-like hybrid integrated circuits conformal to face for continuous respiratory monitoring. Adv Electron Mater. 2020;6(7):2000145.

RIGHTS & PERMISSIONS

2023 2023 The Authors. SmartMat published by Tianjin University and John Wiley & Sons Australia, Ltd.