Pore size determination using normalized J-function for different hydraulic flow units

Abstract

Pore size determination of hydrocarbon reservoirs is one of the main challenging areas in reservoir studies. Precise estimation of this parameter leads to enhance the reservoir simulation, process evaluation, and further forecasting of reservoir behavior. Hence, it is of great importance to estimate the pore size of reservoir rocks with an appropriate accuracy. In the present study, a modified J-function was developed and applied to determine the pore radius in one of the hydrocarbon reservoir rocks located in the Middle East. The capillary pressure data vs. water saturation (P_c-S_w) as well as routine reservoir core analysis include porosity (φ) and permeability (k) were used to develop the J-function. First, the normalized porosity (φ_z), the rock quality index (RQI), and the flow zone indicator (FZI) concepts were used to categorize all data into discrete hydraulic flow units (HFU) containing unique pore geometry and bedding characteristics. Thereafter, the modified J-function was used to normalize all capillary pressure curves corresponding to each of predetermined HFU. The results showed that the reservoir rock was classified into five separate rock types with the definite HFU and reservoir pore geometry. Eventually, the pore radius for each of these HFUs was determined using a developed equation obtained by normalized J-function corresponding to each HFU. The proposed equation is a function of reservoir rock characteristics including φ_z, FZI, lithology index (J^*), and pore size distribution index (ɛ). This methodology used, the reservoir under study was classified into five discrete HFU with unique equations for permeability, normalized J-function and pore size. The proposed technique is able to apply on any reservoir to determine the pore size of the reservoir rock, specially the one with high range of heterogeneity in the reservoir rock properties.

Keywords

Pore size / Pore geometry / Hydraulic flow unit / Capillary pressure / J-function

References

[1] V. Mani, K. Mohanty, Effect of pore-space spatial correlations on two-phase flow in porous media, J. Petrol Sci. Eng. 23 (1999) 173-188.

[2] J.M. Kate, C.S. Gokhale, A simple method to estimate complete pore size distribution of rocks, Eng. Geol. 84 (2006) 48-69.

[3] C.G. Shull, The determination of pore size distribution from gas adsorption data, J. Am. Chem. Soc. 70 (1948) 1405-1410.

[4] W.R. Purcell, Capillary pressure-their measurement using mercury and the calculation of permeability therefrom, Trans. AIME 186 (1949) 39-48.

[5] N.C. Wardlaw, Y. Li, D. Forbes, Pore-throat size correlation from capillary pressure curves, Transp. Porous Media 2 (1987) 597-614.

[6] E.C. Donaldson, N. Ewall, B. Singh, Characteristics of capillary pressure curves, J. Petrol Sci. Eng. 6 (1991) 249-261.

[7] B.K. Mishra, M.M. Sharma, Measurement of pore size distributions from capillary pressure curves, AICHE J. 34 (1988) 684-687.

[8] S. Wo, X. Xie, N.R. Morrow, A statistical model of apparent pore size distribution and drainage capillary pressure, Colloids Surfaces 187 (2001) 449-457.

[9] M.H. Ghazanfari, D. Rashtchian, R. Kharrat, S. Vossoughi, Capillary pressure estimation using pore size distribution functions, Chem. Eng. Technol. 30 (2007) 862-869.

[10] R. Askarinezhad, A new statistical approach to pore/throat size distribution of porous media using capillary pressure distribution concept, J. Petrol Sci. Eng. 75 (2010) 100-104.

[11] A. Abedini, F. Torabi, P. Tontiwachwuthikul, Rock type determination of a carbonate reservoir using various approaches: a case study, Spec. Top. Rev. Porous Media-an Int. J. 2 (2011) 293-300.

[12] A. Abedini, F. Torabi, P. Tontiwachwuthikul, Reservoir rock type analysis using statistical pore size distribution, Spec. Top. Rev. Porous Media-an Int. J. 3 (2012) 97-103.

[13] J.W. Amyx, D.M. Bass, R.L. Whiting, Rock Properties: Petroleum Reservoir Engineering, McGraw-Hill Book Co. Inc., New York, 1960.

[14] A. Abedini, Statistical evaluation of reservoir rock type in a carbonate reservoir, in: Paper No. 152359, presented at the SPE Annual Conference and Exhibition. Denver, Colorado, USA, 30 October-2 November, 2011.

[15] M.C. Leverett, Capillary behavior in porous solids, Trans. AMIE 142 (1941) 152-169.

[16] F.A. Al-Ajmi, S.A. Holditch,Permeability estimation using hydraulic flow units in a central arabia reservoir, in:Paper No. 63254 presented at SPE Conference. Texas, 1e4 October, 2000.

[17] J. Kozeny, Uber Kapillare Leitung des Wassers im Boden Stizungsberichte, Royal Academy of Science, Vienna, 1927, pp. 271-306. Proc. Class I, 136.

[18] P.C. Carmen, Fluid flow through granular beds, Trans. AIChe 15 (1937) 150-166.

[19] S.E.D.M. Desouky, A new method for normalization of capillary pressure curves, Oil Gas Sci. Technol. Rev. IFP 58 (2003) 551-556.