Effect of alumina and silica nanocomposite based on polyacrylamide on light and heavy oil recovery in presence of formation water using micromodel

Abstract

Increasing world request for energy has made oil extraction from reservoirs more desirable. Many novel EOR methods have been proposed and utilized for this purpose. Using nanocomposites in chemical flooding is one of these novel methods. In this study, we investigated the impact of six injection solutions on the recovery of light and heavy oil with the presence of two different brines as formation water using a homogenous glass micromodel. All of the injection solutions were based on a 40,000 ppm NaCl synthetic seawater (SSW), one of which was additive free and the others were prepared by dispersing nanocomposite silica-based polyacrylamide (NCSP), nanocomposite alumina-based polyacrylamide (NCAP), the combination of both nanocomposites silica and alumina based on polyacrylamide (NCSAP), surfactant (CTAB) and polyacrylamide (PAM) with a concentration of 1000 ppm as additives. The Stability of nanocomposites was tested against the salinity of the brine and temperature using salinity and DSC tests which were successful. Alongside stability tests, IFT, contact angle and oil recovery measurements were made. Visual results revealed that in addition to the effect of silica and alumina nanocomposite in reducing interfacial tension and wettability alteration, control of mobility ratio caused a major improvement in sweeping efficiency and oil recovery. According to the sweeping behavior of injected fluids, it was found that the main effect of surfactant was wettability alteration, for polyacrylamide was mobility control and for nanocomposites was the reduction of interfacial tension between oil and injected fluid, which was completely analyzed and checked out. Also, NCSAP with 95.83% and 70.33% and CTAB with 84.35% and 91% have the highest light oil recoveries at 250,000 ppm and 180,000 ppm salinity, respectively which is related to the superposition effect of interactions between nanocomposites, solution and oil. Based on our results it can be concluded that the most effective mechanism in oil recovery was IFT reduction which was done by CTAB reduction also by using a polymer-based nanocomposite such as NCSAP and adding the mobility control factor, the oil recovery can be further enhanced. In the case of heavy oil recovery, it can be concluded that the mobility control played a much more effective role when the PAM performed almost similarly to the CTAB and other nanocomposites with a recovery factor of around 17%. In this study, we tried to investigate the effect of different injection solutions and their related mechanisms on oil recovery.

Keywords

Enhanced oil recovery / Micromodel / Polyacrylamide / Nanocomposite / Salinity / Alumina and silica nanoparticles

Declaration of competing interest

The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

References

[1] Jagar A. Ali, Kamal Kolo, Abbas Khaksar Manshad, Amir H. Mohammadi, Recent advances in application of nanotechnology in chemical enhanced oil recovery: effects of nanoparticles on wettability alteration, interfacial tension reduction, and flooding, Egypt. J. Petrol. 27 (2018) 1371-1383.

[2] Magda I. Youssif, Rehab M. El-Maghraby, Sayed M. Saleh, Elgibaly Ahmed, Silica nanofluid flooding for enhanced oil recovery in sandstone rocks, Egypt. J. Petrol. 27 (2018) 105-110.

[3] Jagar A. Ali, Abdullah M. Kalhury, Ayub N. Sabir, Rawezh N. Ahmed, Nali H. Ali, Abdullah D. Abdullah, 'A state-of-the-art review of the application of nanotechnology in the oil and gas industry with a focus on drilling engineering, J. Petrol. Sci. Eng. 191 (2020), 107118.

[4] Sara Habibi, Arezou Jafari, Zahra Fakhroueian, Application of novel functionalized Al 2 O 3/silica by organosiloxane and amine reagents for enhanced oil recovery, Appl. Nanosci. 10 (2020) 2085-2100.

[5] Mahdi Mohajeri, Mohammad Reza Rasaei, Mahnaz Hekmatzadeh, Experimental study on using SiO2 nanoparticles along with surfactant in an EOR process in micromodel, Petrol. Res. 4 (2019) 59-70.

[6] Suleimanov A. Baghir F.S. Ismailov E.F. Veliyev, Nanofluid for enhanced oil recovery, J. Petrol. Sci. Eng. 78 (2011) 431-437.

[7] Arash Mehdizad, Behnam Sedaee, Peyman Pourafshary, Visual investigation of the effect of clay-induced fluid flow diversion on oil recovery, as a low-salinity water flooding mechanism, J. Petrol. Sci. Eng. 209 (2022), 109959.

[8] Zhongbin Ye, Xiaoping Qin, Nanjun Lai, Peng Qin, Xi Li, Cuixia Li, Synthesis and performance of an acrylamide copolymer containing nano-SiO2 as enhanced oil recovery chemical, J. Chem. 9 (2013) 1-10.

[9] Luky Hendraningrat, Shidong Li, Ole Torsæter, Effect of some parameters influencing enhanced oil recovery process using silica nanoparticles: an experimental investigation,in:SPE Reservoir Characterization and Simulation Conference and Exhibition, OnePetro, 2013.

[10] Wamda Faisal Elmobarak, Fares Almomani, A new insight into the separation of oil from oil/water emulsion by Fe3O4eSiO2 nanoparticles, Environ. Res. 202 (2021), 111645.

[11] Sajad Kiani, Mostafa Mansouri Zadeh, Saeed Khodabakhshi, Alimorad Rashidi, Jamshid Moghadasi, Newly prepared Nano gamma alumina and its application in enhanced oil recovery: an approach to low-salinity waterflooding, Energy & Fuels 30 (2016) 3791-3797.

[12] Yousef Kazemzadeh, Mohammad Sharifi, Masoud Riazi, Hosein Rezvani, Morteza Tabaei, Potential effects of metal oxide/SiO2 nanocomposites in EOR processes at different pressures, Colloids Surf. A Physicochem. Eng. Asp. 559 (2018) 372-384.

[13] Hossein Bahraminejad, Abbas Khaksar Manshad, Masoud Riazi, Jagar A. Ali, S. Mohammad Sajadi, Alireza Keshavarz, CuO/TiO₂/PAM as a novel introduced hybrid agent for waterdoil interfacial tension and wettability optimization in chemical enhanced oil recovery, Energy & Fuels 33 (2019) 10547-10560.

[14] Jagar A. Ali, Kamal Kolo, Abbas Khaksar Manshad, Karl Stephen, Alireza Keshavarz, Modification of LoSal water performance in reducing interfacial tension using green ZnO/SiO2 nanocomposite coated by xanthan, Appl. Nanosci. 9 (2019) 397-409.

[15] Jagar A. Ali, Kamal Kolo, Abbas Khaksar Manshad, Karl D. Stephen, Potential application of low-salinity polymeric-nanofluid in carbonate oil reservoirs: IFT reduction, wettability alteration, rheology and emulsification characteristics, J. Mol. Liq. 284 (2019) 735-747.

[16] Mohammad Zargartalebi, Riyaz Kharrat, Nasim Barati, Enhancement of surfactant flooding performance by the use of silica nanoparticles, Fuel 143 (2015) 21-27.

[17] Luis Torres, Alfredo Moctezuma, Juan R. Avenda-no, Ana Mu-noz, Jorge Gracida, Comparison of bio-and synthetic surfactants for EOR, J. Petrol. Sci. Eng. 76 (2011) 6-11.

[18] Patrizio Raffa, Antonius A. Broekhuis, Francesco Picchioni, Polymeric surfactants for enhanced oil recovery: a review, J. Petrol. Sci. Eng. 145 (2016) 723-733.

[19] S.E. Weschenfelder, M.J.C. Fonseca, C.P. Borges, Treatment of produced water from polymer flooding in oil production by ceramic membranes, J. Petrol. Sci. Eng. 196 (2021), 108021.

[20] H. Yousefvand, A. J.P.M.S. Jafari, Enhanced oil recovery using polymer/nanosilica, Proc. Mater. Sci. 11 (2015) 565-570.

[21] Hadi Saboorian-Jooybari, Morteza Dejam, Zhangxin Chen, Heavy oil polymer flooding from laboratory core floods to pilot tests and field applications: halfcentury studies, J. Petrol. Sci. Eng. 142 (2016) 85-100.

[22] A.Z. Abidin, T. Puspasari, W.A. Nugroho, 'Polymers for enhanced oil recovery technology, Procedia Chem. 4 (2012) 11-16.

[23] Zeinab Hosseini-Dastgerdi, Ashkan Maleki, Ebrahim Elyassi, Alimorad Rashidi, Silica/polyacrylamide nanocomposite for inhibition of asphaltene precipitation from unstable crude oils, Petrol. Sci. Technol. (2022) 1-19.

[24] Frank Zheng, Pilar Quiroga, Gary W. Sams, Challenges in processing produced emulsion from chemical enhanced oil recovery-polymer flood using polyacrylamide, in: SPE Enhanced Oil Recovery Conference, OnePetro, 2011.

[25] Fuwei Yu, Hanqiao Jiang, Zhen Fan, Fei Xu, Hang Su, Junjian Li, Formation and flow behaviors of in situ emulsions in heavy oil reservoirs, Energy & Fuels 33 (2019) 5961-5970.

[26] Reza Gharibshahi, Arezou Jafari, Mohammadreza Omidkhah,Javad Razavi Nezhad, Performance experimental investigation of novel multifunctional nanohybrids on enhanced oil recovery, in: AIP Conference Proceedings, AIP Publishing LLC, 2018, 020012.

[27] Sanaz Tajik, Abbas Shahrabadi, Alimorad Rashidi, Milad Jalilian, Amir Yadegari, Application of functionalized silica-graphene nanohybrid for the enhanced oil recovery performance, Colloids Surf. A Physicochem. Eng. Asp. 556 (2018) 253-265.

[28] M. AfzaliTabar, M. Alaei, M. Bazmi, R Ranjineh Khojasteh, M. Koolivand-Salooki, F.Motiee,A.M. Rashidi, 'Facileand economical preparationmethod ofnanoporous graphene/silica nanohybrid and evaluation of its Pickering emulsion properties for Chemical Enhanced oil Recovery (C-EOR), Fuel 206 (2017) 453-466.

[29] Ashkan Maleki, Zeinab Hosseini-Dastgerdi, Alimorad Rashidi, Effect of nanoparticle modified polyacrylamide on wax deposition, crystallization and flow behavior of light and heavy crude oils, J. Dispersion Sci. Technol. (2021) 1-11.

[30] Fatemeh Razavirad, Abbas Shahrabadi, Parham Babakhani Dehkordi, Alimorad Rashidi, Experimental pore-scale study of a novel functionalized iron-carbon nanohybrid for enhanced oil recovery (EOR), Nanomaterials 12 (2021) 103.

[31] Sang-wook Ui, In-seok Choi, Sung-churl Choi, Synthesis of High Surface Area Mesoporous Silica Powder Using Anionic Surfactant, International Scholarly Research Notices, 2014.

[32] A.N. El-Hoshoudy, S.E.M. Desouky, Betiha Ma, A.M. Alsabagh, Use of 1-vinyl imidazole based surfmers for preparation of polyacrylamideeSiO2 nanocomposite through aza-Michael addition copolymerization reaction for rock wettability alteration, Fuel 170 (2016) 161-175.

[33] Muhammad Shahzad Kamal, Ibnelwaleed A. Hussein, Abdullah S. Sultan, Review on surfactant flooding: phase behavior, retention, IFT, and field applications, Energy & Fuels 31 (2017) 7701-7720.

[34] Juliana Giraldo, Benjumea Pedro, Sergio Lopera, Farid B. Cortés, Marco A. Ruiz, Wettability alteration of sandstone cores by alumina-based nanofluids, Energy & Fuels 27 (2013) 3659-3665.

[35] Ali Maghzi, Riyaz Kharrat, Mohebbi Ali, Mohammad Hossein Ghazanfari, The impact of silica nanoparticles onthe performance of polymer solution in presence of salts in polymer flooding for heavy oil recovery, Fuel 123 (2014) 123-132.

[36] N.A. Ogolo, O.A. Olafuyi, M.O. Onyekonwu, Enhanced oil recovery using nanoparticles, in: SPE Saudi Arabia Section Technical Symposium and Exhibition, OnePetro, 2012.

[37] H. Hematpour, M. Mardi, S. Edalatkhah, R. Arabjamaloei, Experimental study of polymer flooding in low-viscosity oil using one-quarter five-spot glass micromodel, Petrol. Sci. Technol. 29 (2011) 1163-1175.

[38] Ali Maghzi, Mohebbi Ali, Riyaz Kharrat, Mohammad Hossein Ghazanfari, Porescale monitoring of wettability alteration by silica nanoparticles during polymer flooding to heavy oil in a five-spot glass micromodel, Transport Porous Media 87 (2011) 653-664.

[39] Afeez O. Gbadamosi, Radzuan Junin, Muhammad A. Manan, Augustine Agi, Jeffrey O. Oseh, Jamilu Usman, Synergistic application of aluminium oxide nanoparticles and oilfield polyacrylamide for enhanced oil recovery, J. Petrol. Sci. Eng. 182 (2019), 106345.

[40] Afeez O. Gbadamosi, Radzuan Junin, Muhammad A. Manan, Nurudeen Yekeen, Agi Augustine, Hybrid suspension of polymer and nanoparticles for enhanced oil recovery, Polym. Bull. 76 (2019) 6193-6230.

[41] Ali Maghzi, Saber Mohammadi, Mohammad Hossein Ghazanfari, Riyaz Kharrat, Mohsen Masihi, Monitoring wettability alteration by silica nanoparticles during water flooding to heavy oils in five-spot systems: a porelevel investigation, Exp. Therm. Fluid Sci. 40 (2012) 168-176.

[42] Hosein Rezvani, Morteza Tabaei, Masoud Riazi, Pore-scale investigation of Al2O3 nanoparticles for improving smart water injection: effect of ion type, ion and nanoparticle concentration, and temperature, Mater. Res. Express 6 (2019), 085505.

[43] Mohd Bilal Khan, Mohd Faizan Khoker, Mustafiz Husain, Moughes Ahmed, Shams Anwer, Effects of nanoparticles on rheological behavior of polyacrylamide related to enhance oil recovery, Acad. J. Polym. Sci 1 (2018) 1-2.

[44] H, R Arabjamloei Hematpour, M. Nematzadeh, H. Esmaili, M. Mardi, An experimental investigation of surfactant flooding efficiency in low viscosity oil using a glass micromodel, Energy Sources, Part A Recovery, Util. Environ. Eff. 34 (2012) 1745-1758.

[45] Gulcan Bahar Koparal, Himanshu Sharma,Pathma Jith Liyanage, Krishna K. Panthi, Kishore K. Mohanty, Reducing surfactant retention using polyacrylate in Berea sandstone, J. Petrol. Sci. Eng. 208 (2022), 109228.

[46] Sajjad Gharachelou, Abdolhossein Amini, Kadkhodaei Ali, Ziba Hosseini, Javad Honarmand, Rock typing and reservoir zonation based on the NMR logging and geological attributes in the mixed carbonate-siliciclastic Asmari Reservoir, Geopersia 8 (2018) 77-98.

[47] Dingwei Zhu, Limin Wei, Biqing Wang, Yujun Feng, Aqueous hybrids of silica nanoparticles and hydrophobically associating hydrolyzed polyacrylamide used for EOR in high-temperature and high-salinity reservoirs, Energies 7 (2014) 3858-3871.

[48] A.N. El-Hoshoudy, S.E.M. Desouky, A.M. Al-Sabagh, Betiha Ma, M.Y. El-kady, S. Mahmoud, Evaluation of solution and rheological properties for hydrophobically associated polyacrylamide copolymer as a promised enhanced oil recovery candidate, Egypt. J. Petrol. 26 (2017) 779-785.

[49] E.C. Vermolen, M.J. Van Haasterecht, Shehadeh K. Masalmeh, Marinus J. Faber, Diederik Michiel Boersma, M. Gruenenfelder, Pushing the envelope for polymer flooding towards high-temperature and high-salinity reservoirs with polyacrylamide based ter-polymers, in: SPE Middle East Oil and Gas Show and Conference, OnePetro, 2011.