Characterization of pore volume of cumulative water injection distribution

Guoqing Feng , MingLe Yu

Petroleum ›› 2015, Vol. 1 ›› Issue (2) : 158 -163.

PDF
Petroleum ›› 2015, Vol. 1 ›› Issue (2) :158 -163. DOI: 10.1016/j.petlm.2015.03.007
Original article
research-article
Characterization of pore volume of cumulative water injection distribution
Author information +
History +
PDF

Abstract

Pore volume of Cumulative water injection is one of the factors for evaluating water flood effect in a water flood oil field. In previous study, there were limited lab studies for evaluating oil displacement efficiency. A method to characterize the distribution of pore volume of cumulative water injection is proposed in this paper, and it is verified by a five-spot water flooding streamline simulation model. The logarithmic relation between pore volume of cumulative water injection and water saturation is established by regression. An inflection point and limit point of cumulative water injection pore volume are identified. Current simulation model indicates inflection point appears after 2-5 pore volume (PV) injection, and limit point appears after 15-25 PV injection. Both inflection and limit point vary in different regions of reservoir.

Keywords

Water drive reservoir / Cumulative water injection pore volume / Numerical flow simulation / Inflection point / Limit point / Recovery factor

Cite this article

Download citation ▾
Guoqing Feng, MingLe Yu. Characterization of pore volume of cumulative water injection distribution. Petroleum, 2015, 1(2): 158-163 DOI:10.1016/j.petlm.2015.03.007

登录浏览全文

4963

注册一个新账户 忘记密码

Acknowledgments

This work was financially Supported by the National Basic Research Program of China (973) Program, ‘study on water injection in fracture-cave carbonate reservoir’ (2011CB201000).

References

[1]

Hequan Li, Zhaoliang Wu, Mingyuan Li, et al., Establishment of a practical water flooding model and its application to analysis of enhanced oil recovery efficiency, J. Univ. Pet. Ed. Nat. Sci. 26 (4) (August 2002)51-52.

[2]

Shuhong Ji, Changbing Tian, Chengfang Shi, et al., New understanding on water-oil displacement efficiency in a high water-cut stage, Pet. Explor. Dev. 39 (3) (June 2012)338-344.

[3]

Kaoping Song, Yushu Wu, Bingyu Ji, A 4-fanction method for estimating distribution of residual oil saturation in water drive reservoir, Acta Pet. Sin. 27 (3) (May 2006)91-95.

[4]

Hanbing Xu, Xiangfang Li, Depei Shi, et al., An analytical method for calculating water cut of producers in injection-production pattern, Acta Pet. Sin. 31 (3) (May 2010)471-474.

[5]

Jinyu Liu, DianshengWang, Bolin Liu, et al., Study on the variation law of the water-cut of low-permeability low-saturation sandstone reservoirs in water displacing oil, J. Xian Shiyou Univ. Nat. Ed. 26 (1) (Jan 2011)37-41.

PDF

0

Accesses

0

Citation

Detail

Sections
Recommended

/