Numerical investigation of proppant transportation characteristics in hydraulically fractured wedge fractures

Abstract

Hydraulic fracturing creates multiple induced fractures and micro-fractures, forming a complex fracture network in the reservoir. The study of the transport and distribution of the proppant within the fracture network is critical to the design and evaluation. However, existing simulation studies of proppant transport tend to be overly idealized and neglect the inhomogeneity of fracture widths that occur after fracturing. To address these issues, this study employs computational fluid dynamics (CFD) to study the transportation of fracturing fluid and proppant within a fracture network. The flow dynamics of solid-liquid two-phase flow in fractures are simulated using the Euler-Euler multiphase flow model. Considering the actual variables in field construction and the inherent inhomogeneity in realistic fracture structures, a three-dimensional model was established to capture the gradual variation in fracture width. The accuracy of this model was verified through a comparative analysis with physical experiments. On this basis, an investigation was conducted to explore the impact of particle size, particle density, particle volume concentration, and injection velocity on proppant transportation. The results demonstrate that, in contrast to conventional rectangular fractures, sandbanks formed from wedge fractures exhibit a lower height, which facilitates improved transportation into deeper fractures. Furthermore, particle concentration primarily influences distal fractures, with proppant particle size being second. The injection velocity has a significant impact on the height of the sandbank located in proximity to the fracture inlet. The research findings provide a deeper understanding of the transport and distribution of proppants within wedge fractures, thereby establishing a theoretical basis for the analysis and engineering guidance in on-site hydraulic fracturing construction.

Keywords

Proppant transport / Wedge fracture / Computational fluid dynamics (CFD) / Particle-fluid flow / Hydraulic fracturing

Funding

This work was supported by Hainan Province Science and Technology Special Fund (No. ZDYF2022SHFZ063), and National Natural Science Foundation of China (Grant Nos. 52174002, 52274008).

Disclosure statement

No potential conflict of interest was reported by the author(s).

CRediT authorship contribution statement

Xiaofeng Sun: Writing -original draft, Investigation. Jinxin Bao: Validation, Software. Zhipeng Li: Visualization. Jingyu Qu: Writing -review & editing, Methodology.

Declaration of competing interest

The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

References

[1] A.C. Barbati, J. Desroches, A. Robisson, G.H. McKinley, Complex fluids and hydraulic fracturing, Annu. Rev. Chem. Biomol. Eng. 7 (March) (2016) 415-453, https://doi.org/10.1146/annurev-chembioeng-080615-033630.

[2] A. Isah, M. Hiba, K. Al-Azani, M.S. Aljawad, M. Mahmoud, A comprehensive review of proppant transport in fractured reservoirs: experimental, numerical, and field aspects, J. Nat. Gas Sci. Eng. 88 (January) (2021) 103832, https://doi.org/10.1016/j.jngse.2021.103832.

[3] X. Liu, Z. Qu, T. Guo, Q. Tian, W. Lv, Z. Xie, C. Chu, An innovative technology of directional propagation of hydraulic fracture guided by radial holes in fossil hydrogen energy development, Int. J. Hydrogen Energy (2019) 5286-5302, https://doi.org/10.1016/j.ijhydene.2018.07.189.

[4] R. Sahai, R.G. Moghanloo, Proppant transport in complex fracture networks e a review, J. Petrol. Sci. Eng. 182 (November 2018) (2019) 106199, https://doi.org/10.1016/j.petrol.2019.106199.

[5] J. Lee, T. Babadagli, Effect of roughness on fluid flow and solute transport in a single fracture: a review of recent developments, current trends, and future research, J. Nat. Gas Sci. Eng. 91 (April) (2021) 103971, https://doi.org/10.1016/j.jngse.2021.103971.

[6] J. Zeng, H. Li, D. Zhang, Numerical simulation of proppant transport in propagating fractures with the multi-phase particle-in-cell method, Fuel 245 (February) (2019) 316-335, https://doi.org/10.1016/j.fuel.2019.02.056.

[7] B.R. Barboza, B. Chen, C. Li, A review on proppant transport modelling, J. Petrol. Sci. Eng. 204 (March) (2021) 108753, https://doi.org/10.1016/j.petrol.2021.108753.

[8] T. Guo, X. Wang, Z. Li, F. Gong, Q. Lin, Z. Qu, W. Lv, Q. Tian, Z. Xie, Numerical simulation study on fracture propagation of zipper and synchronous fracturing in hydrogen energy development, Int. J. Hydrogen Energy (2019) 5270-5285, https://doi.org/10.1016/j.ijhydene.2018.08.072.

[9] Q. Wen, S. Wang, X. Duan, Y. Li, F. Wang, X. Jin, Experimental investigation of proppant settling in complex hydraulic-natural fracture system in shale reservoirs, J. Nat. Gas Sci. Eng. 33 (2016) 70-80, https://doi.org/10.1016/j.jngse.2016.05.010.

[10] M. Ba Geri, A. Imqam, M. Suhail, Investigate Proppant Transport with Varying Perforation Density and its Impact on Proppant Dune Development inside Hydraulic Fractures. SPE Middle East Oil and Gas Show and Conference, MEOS, Proceedings, 2019-March, 2019, https://doi.org/10.2118/195018-ms.

[11] L. Pan, Y. Zhang, L. Cheng, Z. Lu, Y. Kang, P. He, B. Dong, Migration and distribution of complex fracture proppant in shale reservoir volume fracturing, Nat. Gas. Ind. B 5 (6) (2018) 606-615, https://doi.org/10.1016/j.ngib.2018.11.009.

[12] D. Zhou, Z. Zhang, F. Hui, Y. Shi, C. Zhao, Y. Zhou, Experiment and numerical simulation on transportation laws of proppant in major fracture during slick water fracturing, OIL DRILLING & PRODUCTION TECHNOLOGY 39 (4) (2017) 499-508, https://doi.org/10.13639/j.odpt.2017.04.019.

[13] T. Guo, M. Lyu, M. Chen, Y. Xu, D. Weng, Z. Qu, C. Dai, J. Hou, X. Liu, Proppant transport law in multi-branched fractures induced by volume fracturing, Petrol. Explor. Dev. 50 (4) (2023) 955-970, https://doi.org/10.1016/S1876-3804(23)60441-0.

[14] T. Zhang, R. Yang, J. Guo, J. Zeng, Numerical investigation on proppantewater mixture transport in slot under high Reynolds number conditions, Energies 13 (21) (2020) 5665.

[15] R. Sahai, J.L. Miskimins, K.E. Olson,Laboratory Results of Proppant Transport in Complex Fracture Systems. Society of Petroleum Engineers -SPE Hydraulic Fracturing Technology Conference 2014, 2014, pp. 35-60, https://doi.org/10.2118/168579-ms.

[16] T. Chun, Y. Li, K. Wu, Comprehensive experimental study of proppant transport in an inclined fracture, J. Petrol. Sci. Eng. 184 (August 2019) (2020) 106523, https://doi.org/10.1016/j.petrol.2019.106523.

[17] X. Kong, J. McAndrew, A computational fluid dynamics study of proppant placement in hydraulic fracture networks, Society of Petroleum Engineers -SPE Unconventional Resources Conference 2017, Figure 1 (2017) 982-995, https://doi.org/10.2118/185083-ms.

[18] J. Li, S. He, M. Wu, P. Liu, A comprehensive review of the proppant transportation in different simplified fracture models: experimentation, modeling, and prospects, Geoenergy Science and Engineering 228 (August 2021) (2023) 211974, https://doi.org/10.1016/j.geoen.2023.211974.

[19] J. Xu, Y. Ding, L. Yang, Z. Liu, R. Gao, Z. Wang, S. Mo, Numerical analysis of proppants transport in tortuous fractures of shale gas reservoirs after shear deformation, J. Nat. Gas Sci. Eng. 78 (August 2019) (2020) 103285, https://doi.org/10.1016/j.jngse.2020.103285.

[20] X. Huang, P. Yuan, H. Zhang, J. Han, A. Mezzatesta, J. Bao, Numerical Study of Wall Roughness Effect on Proppant Transport in Complex Fracture Geometry. SPE Middle East Oil and Gas Show and Conference, MEOS, Proceedings, 2017-March, 2017, pp. 1935e 1950, https://doi.org/10.2118/183818-ms.

[21] M.E. Fernández, M. Baldini, L.A. Pugnaloni, M. Sánchez, A.R. Guzzetti, C.M. Carlevaro,Proppant transport and settling in a narrow vertical wedgeshaped fracture, 49th US Rock Mechanics/Geomechanics Symposium 3 (2015) 2268-2271, 2015.

[22] S. Tong, M. Gu, R. Singh, K.K. Mohanty, Proppant transport in foam fracturing fluid during hydraulic fracturing, J. Petrol. Sci. Eng. 182 (July) (2019) 106279, https://doi.org/10.1016/j.petrol.2019.106279.

[23] J. Xie, Y. Hu, Y. Kang, H. Chen, Q. Liu, Numerical study on proppant transport in supercritical carbon dioxide under different fracture shapes: flat, wedgeshaped, and bifurcated, Energy Fuel. 36 (17) (2022) 10278-10290, https://doi.org/10.1021/acs.energyfuels.2c01370.

[24] J. Guo, Q. Lu, F. Zeng, A productivity prediction model for a fractured well with wedge-shaped fractures, Acta Pet. Sin. 34 (2) (2013) 346-352, 2013.

[25] C.L. Cipolla, N.R. Warpinski, M.J. Mayerhofer, E.P. Lolon, M.C. Vincent, The relationship between fracture complexity, reservoir properties, and fracture treatment design, Society of Petroleum Engineers -SPE Asia Pacific Oil and Gas Conference and Exhibition 2010, APOGCE 1 (2010) 44-68, 2010.

[26] Ding Jianmin D. Gidaspow, A bubbling fluidization model using kinetic theory of granular flow, AIChE J. 36 (4) (1990) 523-538, https://doi.org/10.1002/aic.690360404.

[27] L. Huilin, D. Gidaspow, J. Bouillard, L. Wentie, Hydrodynamic simulation of gas-solid flow in a riser using kinetic theory of granular flow, Chem. Eng. J. 95 (1-3) (2003) 1-13, https://doi.org/10.1016/S1385-8947(03)00062-7.

[28] A.A. Araoye, H.M. Badr, W.H. Ahmed, Investigation of flow through multistage restricting orifices, Ann. Nucl. Energy 104 (2017) 75-90, https://doi.org/10.1016/j.anucene.2017.02.002.

[29] J. Xiong, R. Cheng, C. Lu, X. Chai, X. Liu, X. Cheng,CFD simulation of swirling flow induced by twist vanes in a rod bundle, Nucl. Eng. Des. 338 (August) (2018) 52-62, https://doi.org/10.1016/j.nucengdes.2018.08.003.

[30] M. Roostaei, A. Nouri, V. Fattahpour, D. Chan, Numerical simulation of proppant transport in hydraulic fractures, J. Petrol. Sci. Eng. 163 (November 2017) (2018) 119-138, https://doi.org/10.1016/j.petrol.2017.11.044.

[31] Y. Tsuji, Y. Morikawa, H. Shiomi, LDV measurements of an air-solid two-phase flow in a vertical pipe, J. Fluid Mech. 139 (1984) 417-434, https://doi.org/10.1017/S0022112084000422.