Particle Impact Drilling (PID) is a novel method to improve the rate of penetration (ROP). In order to further improve the performance of PID, an investigation into the effect of single and double particles: (1) diameter; (2) initial velocity; (3) distance; and (4) angle of incidence was undertaken to investigate their effects on broken volume and penetration depth into hard brittle rock. For this purpose, the laboratory experiment of single particle impact rock was employed. Meanwhile, based on the LS-DYNA, a new finite element (FE) simulation of the PID, including single and double particles impact rock, has been presented. The 3-dimensional (3D), aix-symmetric, dynamic-explicit, Lagrangian model has been considered in this simulation. And the Elastic and Holmquist Johnson Cook (HJC) material behaviors have been used for particles and rocks, respectively. The FE simulation results of single particle impacting rock are good agreement with experimental data. Furthermore, in this article the optimal impact parameters, including diameter, initial velocity, distance and the angle of incidence, are obtained in PID.
Acknowledgments
The Authors are grateful for the financial support from the Natural Science foundation of China (NSFC) (No. 50874095, No. 51174173 and No. 51374176), the China National Science and Technology Major Project (No. 2011ZX05050), and Graduate Innovation foundation of College of Mechatronic Engineering, Southwest Petroleum University (No. CX2014SZ03). Without their support, this work would not have been possible.
| [1] |
W. Li, T. Yan, Drilling optimization based on the fractal crushing work ratio equation of rocks, Acta Pet. Sin. 4 (2011) 693-696.
|
| [2] |
Y. Peng, Z.H. Shen, S.H. Fan, Finite element model for analyzing stress field of bottom hole based on excavating method, Acta Pet. Sin. 6 (2006) 133-140.
|
| [3] |
Gordon A. Tibbitt, Greg G. Galloway, Particle drilling alters standard rockcutting approach, World Oil (2008) 37-44.
|
| [4] |
A.H. Hanuka, Ore-bearing Rock Blasting Physical Process, first ed., Metallurgical Industry Press, Beijing, 1980.
|
| [5] |
X.B. Li, D. Gu, Rock Impact Dynamics, first ed., Central South University Of Technology Press, Changsha, 1994.
|
| [6] |
W.L. Wang, Drilling and Blasting, first ed., Coal Industry Press, Beijing, 1984.
|
| [7] |
Y.H. Zhao, Crack pattern evolution and a fractal damage constitutive model for rock, Int. J. Rock Mech. Min. Sci. 3 (1998) 349-366.
|
| [8] |
R. Cotta, Materials & Skills for Historic Building Conservation, first ed., Blackwell, London, 2008.
|
| [9] |
L.I.G. De Vallejo, M. Ferrer,Geological Engineering, first ed.ed., CRC Press, Netherlands, 2011.
|
| [10] |
V. Gupta, J.S. Bergstrom, Compressive failure of rocks by shear faulting, Int. J. Rock Mech. Min. Sci. B 10 (1998) 23,875-23,895.
|
| [11] |
N. Cho, C.D. Martin, D.C. Sego, Development of a shear zone in brittle rock subjected to direct shear, Int. J. Rock Mech. Min. Sci. 8 (2008 May 2) 1335-1346.
|
| [12] |
R.M. Jones, Mechanics of Composite Materials, Hemisphere Publishing Co, New York, 1975.
|
| [13] |
G.R. Johnson, T.J. Holmquist,An improved computational model for brittle materials in high pressure science and technology, in:American Institute of Physics Conference Proceedings, 1993, pp. 981-984.
|
| [14] |
Q. Fang, X.Z. Kong, H. Wu, Z.M. Gong, Determination of Holmquist-Johnson-Cook constitutive model parameters of rock, Eng. Mech. 3 (2014) 197-204.
|
| [15] |
X.J. Liu, P.Y. Luo, Rock Mechanics and Petroleum Engineering, first ed., Petroleum Industry Press, Beijing, 2004.
|
| [16] |
M.H. Zhang, V.P.W. Shim, G. Lu, C.W. Chew, Resistance of high strength concrete to projectile impact, Int. J. Impact Eng. 7 (2004 June 11) 825-841.
|
| [17] |
Q. Wang, Numerical Simulation Method Study of Particle Impacting Breaking Rock, Electronics, Scholarly Journal, M.Sc. Thesis, Southwest Petroleum University, 2011.
|
| [18] |
X.T. Wu, Y. Li, H.P. Li, Research on the material constants of the HJC dynamic constitutive model for concrete, Chin. J. Appl. Mech. 2 (2010) 340-344.
|
| [19] |
J.Z. Bai,LS-DYNA 3D Theoretical Basis and Case Analysis, first ed.ed., Science Press, Beijing, 2005.
|
| [20] |
D.Y. Chang, G.S. Li, Z.H. Shen, Z.H. Huang, S.C. Tian, H.Z. Shi, The stress field of bottom hole in deep and ultra-deep wells, Acta Pet. Sin. 4 (2011) 697-703.
|
| [21] |
D.J. Frew, Mem, M.J. Forrestal, S.J. Hanchak, Penetration experiments with limestone targets and Ogive-Nose steel projectiles, J. Appl. Mech. 4 (2000 May 10) 841-845.
|
| [22] |
L. Qian, M. Qu, Study on terminal effects of dense fragment cluster impact on armor plate, Int. J. Impact Eng. 6 (2004 May 25) 769-780.
|
PDF
