Numerical modeling of the critical pipeline inclination for the elimination of the water accumulation on the pipe floor in oil-water fluid flow

Abstract

In this work, numerical models were developed to investigate the critical inclination of a pipeline to eliminate the water accumulation at the floor of the pipe carrying oil-water fluid. Computational fluid dynamics software was used to establish a geometric model of the pipe with various inclination angles, and a grid-independent verification was conducted to determine a reasonable meshing method. Quantitative relationships were determined between the pipe inclination angle and the affecting factors including the flow velocity, viscosity and the pipe diameter, where the water accumulation would not be able to occur. Generally, the critical inclination angle increases with the fluid flow velocity. The refluxing of water is the key mechanism causing the water accumulation at the bottom of the pipe. In addition to the fluid flow velocity, an increase in fluid viscosity and a decrease in the pipe diameter cause an increase of the critical inclination angle that the water phase can be carried away by oil. The model can be used to determine the critical inclination of pipelines carrying oil-water fluid to cause the water accumulation and the operating conditions that can eliminate the accumulation of water phase at the pipe floor.

Keywords

Pipeline inclination / Oil-water fluid flow / Water accumulation / Numerical modeling

Declaration of competing interests

The authors declare that they have no conflict of interests.

References

[1] Tao Liu Y. Frank Cheng, Mohita Sharma, Gerrit Voordouw, Effect of fluid flow on biofilm formation and microbiologically influenced corrosion of pipelines in oilfield produced water, J. Petrol. Sci. Eng. 156 (2017) 451-459, https://doi.org/10.1016/j.petrol.2017.06.026.

[2] G.A. Zhang, Y.F. Cheng, On the fundamentals of electrochemical corrosion of X65 steel in CO2-containing formation water in the presence of acetic acid in petroleum production, Corrosion Sci. 51 (2009) 87-94, https://doi.org/10.1016/j.corsci.2008.10.013.

[3] H. Hu, Y.F. Cheng, Modeling by computational fluid dynamics simulation of pipeline corrosion in CO2-containing oilewater two phase flow, J. Petrol. Sci. Eng. 146 (2016) 134-141, https://doi.org/10.1016/j.petrol.2016.04.030.

[4] A.S.I. Ismail, et al., Experimental investigation of oilewater two-phase flow in horizontal pipes: pressure losses, liquid holdup and flow patterns, J. Petrol. Sci. Eng. 127 (2015) 409-420, https://doi.org/10.1016/j.petrol.2015.01.038.

[5] R.C.R.D. Silva, R.S. Mohamed, A.C. Bannwart, Wettability alteration of internal surfaces of pipelines for use in the transportation of heavy oil via core-flow, J. Petrol. Sci. Eng. 51 (2006) 17-25, https://doi.org/10.1016/j.petrol.2005.11.016.

[6] R.G. Walvekar, T.S.Y. Choong, S.A. Hussain, M. Khalid, T.G. Chuah, Numerical study of dispersed oilewater turbulent flow in horizontal tube, J. Petrol. Sci. Eng. 65 (2009) 123-128, https://doi.org/10.1016/j.petrol.2008.12.019.

[7] J. Lovick, P. Angeli, Experimental studies on the dual continuous flow pattern in oilewater flows, Int. J. Multiphas. Flow 30 (2004) 139-157, https://doi.org/10.1016/j.ijmultiphaseflow.2003.11.011.

[8] B. Grassi, D. Strazza, P. Poesio, Experimental validation of theoretical models in two-phase high-viscosity ratio liquideliquid flows in horizontal and slightly inclined pipes, Int. J. Multiphas. Flow 34 (2008) 950-965, https://doi.org/10.1016/j.ijmultiphaseflow.2008.03.006.

[9] J.Y.L. Lum, T. Al-Wahaibi, P. Angeli, Upward and downward inclination oilewater flows, Int. J. Multiphas. Flow 32 (2006) 413-435, https://doi.org/10.1016/j.ijmultiphaseflow.2006.01.001.

[10] P. Poesio, D. Strazza, G. Sotgia, Very-viscous-oil/water/air flow through horizontal pipes: pressure drop measurement and prediction, Chem. Eng. Sci. 64 (2009) 1136-1142, https://doi.org/10.1016/j.ces.2008.10.061.

[11] W. Wang, J. Gong, P. Angeli, Investigation on heavy crude-water two phase flow and related flow characteristics, Int. J. Multiphas. Flow 37 (2011) 1156-1164, https://doi.org/10.1016/j.ijmultiphaseflow.2011.05.011.

[12] T. Al-Wahaibi, N. Yusuf, Y. Al-Wahaibi, et al., Experimental study on the transition between stratified and non-stratified horizontal oilewater flow, Int. J. Multiphas. Flow 38 (2012) 126-135, https://doi.org/10.1016/j.ijmultiphaseflow.2011.08.007.

[13] J.G. Flores, X.T. Chen, J.P. Brill, Characterization of oil-water flow patterns in vertical and deviated wells, SPE Prod. Facil. 14 (1999) 94-101, https://doi.org/10.2118/56108-PA.

[14] G. Xu, L. Cai, A. Ullmann, N. Brauner,Trapped water flushed by flowing oil in upward-inclined oil pipelines, in:2012 9th International Pipeline Conference, Am. Soc. Mech. Eng, 2012, pp. 637-647, https://doi.org/10.1115/IPC2012-90680.

[15] M. Mohammadi, S. Shahhosseini, M. Bayat, Direct numerical simulation of water droplet coalescence in the oil, Int. J. Heat Fluid Flow 36 (2012) 58-71, https://doi.org/10.1016/j.ijheatfluidflow.2012.04.001.

[16] A.B. Desamala, A.K. Dasamahapatra, T.K. Mandal, Oil-water two-phase flow characteristics in horizontal pipelineea comprehensive CFD study, World Acad. Sci. Eng. Technol. Int. J. Chem. Mol. Nucl. Mater. Metall. Eng. 8 (2014) 360-364.

[17] G. Xu, L. Cai, A. Ullmann, N. Brauner, Experiments and simulation of water displacement from lower sections of oil pipelines, J. Petrol. Sci. Eng. 147 (2016) 829-842, https://doi.org/10.1016/j.petrol.2016.09.049.

[18] M.J. Hancock, J.W.M. Bush, Fluid pipes, J. Fluid Mech. 466 (2002) 285-304, https://doi.org/10.1017/S0022112002001258.

[19] L. Wang, D. Gao, Y. Zhang, Numerical simulation of turbulent flow of hydraulic oil through 90 degrees circular-sectional bend, Chin. J. Mech. Eng. 25 (2012) 905-910, https://doi.org/10.3901/CJME.2012.05.905.

[20] A. Alias, J. Koto, Y.M. Ahmed, CFD simulation for stratified oil-water two-phase flow in a horizontal pipe, in: Proceeding of Ocean, Mechanical and Aerospace-Science and Engineering 1, 2014, pp. 20-25.

[21] N. Brauner, D.M. Maron, Identification of the range of small diameters conduits, regarding two-phase flow pattern transitions, Int. Commun. Heat Mass Tran. 19 (1992) 29-39, https://doi.org/10.1016/0735-1933(92)90061-L.

[22] X. Song, Y. Yang, T. Zhang, K. Xiong, Z. Wang, Studies on water carrying of diesel oil in upward inclined pipes with different inclination angle, J. Petrol. Sci. Eng. 157 (2017) 780-792, https://doi.org/10.1016/j.petrol.2017.07.076.