Well selection in depleted oil and gas fields for a safe CO₂ storage practice: A case study from Malaysia

Abstract

Carbon capture and sequestration technology is recognized as a successful approach taken to mitigate the amount of greenhouse gases released into the atmosphere. However, having a successful storage practice requires wise selection of suitable wells in depleted oil or gas fields to reduce the risk of leakage and contamination of subsurface resources. The aim of this paper is to present a guideline which can be followed to provide a better understanding of sophisticated wells chosen for injection and storage practices. Reviewing recent studies carried out on different aspects of geosequestration indicated that the fracture pressure of seals and borehole conditions such as cement-sheath integrity, distance from faults and fractures together with the depth of wells are important parameters, which should be part of the analysis for well selection in depleted reservoirs. A workflow was then designed covering these aspects and it was applied to a depleted gas field in Malaysia. The results obtained indicated that Well B in the field may have the potential of being a suitable conduit for injection. Although more studies are required to consider other aspects of well selections, it is recommended to employ the formation integrity analysis as part of the caprock assessment before making any decisions.

Keywords

CO₂ storage / Injection wells / Leakage / Carbonate reservoir / Malaysia

Acknowledgments

Curtin University Sarawak Malaysia is appreciated for Funding this research through the Curtin Sarawak Research Institute (CSRI) Flagship scheme under the grant number CSRI-6015.

References

[1] B. Metz, O. Davidson, H. Coninck, M. Loos, L. Meyer, IPCC, 2005:IPCC Special Report on Carbon Dioxide Capture and Storage, Prepared by Working Group III of the Intergovernmental Panel on Climate Change. Cambridge, United Kingdom and New York, NY, USA, 2005, p. 442.

[2] M. Zhang, S. Bachu, Review of integrity of existing wells in relation to CO₂ geological storage: what do we know? Int. J. Greenh. Gas Control 5 (4) (2011) 826-840.

[3] S. Bachu, Evaluation of CO₂ Sequestration Capacity in Oil and Gas Reservoirs in the Western Canada Sedimentary Basin, Alberta Geological Survey, Alberta Energy and Utilities Board March, 2004.

[4] A. Saeedi, Experimental Study of Multiphase Flow in Porous Media during CO₂ Geo-sequestration Processes, Springer Science & Business Media, 2012, pp. 1-190.

[5] A. Raza, R. Rezaee, R. Gholami, V. Rasouli, C.H. Bing, R. Nagarajan, M.A. Hamid, Injectivity and quantification of capillary trapping for CO₂ storage: a review of influencing parameters, J. Nat. Gas Sci. Eng. 26 (2015) 510-517.

[6] M. Loizzo, B. Lecampion, T. Bérard, A. Harichandran, L. Jammes, Reusing O&G-Depleted reservoirs for CO₂ storage: pros and cons, SPE projects, Facil. Constr. 5 (03) (2010) 166-172.

[7] A. Raza, R. Rezaee, R. Gholami, C.H. Bing, R. Nagarajan, M.A. Hamid, A screening criterion for selection of suitable CO₂ storage sites, J. Nat. Gas Sci. Eng. 28 (2016) 317-327.

[8] A. Raza, R. Rezaee, C.H. Bing, R. Gholami, M.A. Hamid, R. Nagarajan, Carbon dioxide storage in subsurface geologic medium: a review on capillary trapping mechanism, Egypt. J. Petrol. (EGYJP)-Elsevier 25 (3) (2015) 367-373.

[9] S. Bachu, T.L. Watson, Review of failures for wells used for CO₂ and acid gas injection in Alberta, Canada, Energy Procedia 1 (1) (2009) 3531-3537.

[10] M. Bai, J. Sun, K. Song, L. Li, Z. Qiao, Well completion and integrity evaluation for CO₂ injection wells, Renew. Sustain. Energy Rev. 45 (2015) 556-564.

[11] A. Duguid, J.W. Carey, R. Butsch, Well integrity assessment of a 68 year old Well at a CO₂ injection project, Energy Procedia 63 (2014) 5691-5706.

[12] B. Vignes, A.M. Enoksen, M. Ovesen, CO₂ Injection and Storagequalification of Well Barriers and Adjacent Wells, Offshore Technology Conference, Offshore Technology Conference, 2010, pp. 1-11.

[13] T.L. Watson, S. Bachu, Identification of Wells with High CO2-leakage Potential in Mature Oil Fields Developed for CO2-Enhanced Oil Recovery, Society of Petroleum Engineers, 2008, pp. 1-10.

[14] T.L. Watson, S. Bachu, Evaluation of the potential for gas and CO₂ leakage along wellbores, SPE Drill. Complet. 24 (01) (2009) 115-126.

[15] A. Chadwick, R. Arts, C. Bernstone, F. May, S. Thibeau, P. Zweigel, Best practice for the storage of CO₂ in saline aquifers, Br. Geol. Surv. Occas. Publ. 14 (2008) 267.

[16] A.R. Kovscek, Screening criteria for CO₂ storage in oil reservoirs, Pet. Sci. Technol. 20 (7-8) (2002) 841-866.

[17] S. Li, M. Dong, Z. Li, S. Huang, H. Qing, E. Nickel, Gas breakthrough pressure for hydrocarbon reservoir seal rocks: implications for the security of longterm CO₂ storage in the Weyburn field, Geofluids 5 (4) (2005) 326-334.

[18] X. Li, X. Fan, Effect of CO₂ phase on contact angle in oil-wet and water-wet pores, Int. J. Greenh. Gas Control 36 (2015) 106-113.

[19] F. Liu, P. Lu, C. Zhu, Y. Xiao, Coupled reactive flow and transport modeling of CO₂ sequestration in the Mt. Simon sandstone formation, Midwest U.S.A, Int. J. Greenh. Gas Control 5 (2) (2011) 294-307.

[20] O. Lopez, N. Idowu, A. Mock, H. Rueslåtten, T. Boassen, S. Leary, P. Ringrose, Pore-scale modelling of CO2-brine flow properties at In Salah, Algeria, Energy Procedia 4 (2011) 3762-3769.

[21] J.P. Morris, Y. Hao, W. Foxall, W. McNab, A study of injection-induced mechanical deformation at the In Salah CO₂ storage project, Int. J. Greenh. Gas Control 5 (2) (2011) 270-280.

[22] A. Ouellet, T. Bérard, J. Desroches, P. Frykman, P. Welsh, J. Minton, Y. Pamukcu, S. Hurter, C. Schmidt-Hattenberger, Reservoir geomechanics for assessing containment in CO₂ storage: a case study at Ketzin, Germany, Energy Procedia 4 (2011) 3298-3305.

[23] E. Tenthorey, T. Dance, Y. Cinar, J. Ennis-King, J. Strand, Fault modelling and geomechanical integrity associated with the CO2CRC Otway 2C injection experiment, Int. J. Greenh. Gas Control 30 (2014) 72-85.

[24] V. Vilarrasa, Impact of CO₂ injection through horizontal and vertical wells on the caprock mechanical stability, Int. J. Rock Mech. Min. Sci. 66 (2014) 151-159.

[25] Z. Xue, S. Mito, K. Kitamura, T. Matsuoka, Case study: trapping mechanisms at the pilot-scale CO₂ injection site, Nagaoka, Japan, Energy Procedia 1 (1) (2009) 2057-2062.

[26] R. Daniel, J. Kaldi, Evaluating Seal Capacity of Caprocks and Intraformational Barriers for the Geosequestration of CO2, Eastern Australasian Basins Symposium, Sydney, Australia, 2008.

[27] C. Hawkes, P. McLellan, U. Zimmer, S. Bachu, Geomechanical Factors Affecting Geological Storage of CO₂ in Depleted Oil and Gas Reservoirs: Risks and Mechanisms, Gulf Rocks 2004 the 6th North America Rock Mechanics Symposium (NARMS), American Rock Mechanics Association, 2004, pp. 1-11.

[28] S.J.T. Hangx, C.J. Spiers, C.J. Peach, The mechanical behavior of anhydrite and the effect of deformation on permeability developmenteImplications for caprock integrity during geological storage of CO2, Energy Procedia 4 (2011) 5358-5363.

[29] Z. Li, M. Dong, S. Li, S. Huang, CO₂ sequestration in depleted oil and gas reservoirsdcaprock characterization and storage capacity, Energy Convers. Manag. 47 (2006) 1372-1382.

[30] K. Abid, R. Gholami, P. Choate, B.H. Nagaratnam, A review on cement degradation under CO2-rich environment of sequestration projects, J. Nat. Gas Sci. Eng. 27 (2015) 1149-1157.

[31] S.J. Hangx, A. van der Linden, F. Marcelis, E. Liteanu, Defining the Brittle Failure Envelopes of Individual Reaction Zones Observed in CO2-exposed Wellbore Cement, Environmental science & technology, 2015, pp. 1031-1038.

[32] K. Yamaguchi, S. Shimoda, H. Kato, M.J. Stenhouse, W. Zhou, A. Papafotiou, Y. Yamashita, K. Miyashiro, S. Saito, The Long-term corrosion behavior of abandoned wells under CO₂ geological storage conditions: (3) Assessment of long-term (1,000-year) performance of abandoned wells for geological CO₂ storage, Energy Procedia 37 (2013) 5804-5815.

[33] J.W. Carey, M. Wigand, S.J. Chipera, G. WoldeGabriel, R. Pawar, P.C. Lichtner, S.C. Wehner, M.A. Raines, G.D. Guthrie, Analysis and performance of oil well cement with 30 years of CO₂ exposure from the SACROC Unit, West Texas, USA, Int. J. Greenh. Gas Control 1 (2007) 75-85.

[34] M. Ferronato, G. Gambolati, C. Janna, P. Teatini, Geomechanical issues of anthropogenic CO₂ sequestration in exploited gas fields, Energy Convers. Manag. 51 (10) (2010) 1918-1928.

[35] S. Kim, S.A. Hosseini, Geological CO₂ storage: incorporation of porepressure/stress coupling and thermal effects to determine maximum sustainable pressure limit, Energy Procedia 63 (2014) 3339-3346.

[36] J. Rutqvist, J. Birkholzer, F. Cappa, C.F. Tsang, Estimating maximum sustainable injection pressure during geological sequestration of CO₂ using coupled fluid flow and geomechanical fault-slip analysis, Energy Convers. Manag. 48 (6) (2007) 1798-1807.

[37] E. Tillner, J. Shi, G. Bacci, C.M. Nielsen, P. Frykman, F. Dalhoff, T. Kempka, Coupled dynamic flow and geomechanical simulations for an integrated assessment of CO₂ storage impacts in a saline aquifer, Energy Procedia 63 (2014) 2879-2893.

[38] S. Vidal-Gilbert, E. Tenthorey, D. Dewhurst, J. Ennis-King, P. Van Ruth, R. Hillis, Geomechanical analysis of the Naylor Field, Otway Basin, Australia: implications for CO₂ injection and storage, Int. J. Greenh. Gas Control 4 (5) (2010) 827-839.

[39] R. Masoudi, M. Jalil, D.J. Press, K.-H. Lee, C. Phuat Tan, L. Anis, N.B. Darman, M. Othman, An integrated reservoir simulation-geomechanical study onfeasibility of CO₂ storage in M4 carbonate reservoir, Malaysia, in: International Petroleum Technology Conference, 15e 17 November, Bangkok, Thailand, 2011.

[40] H. Deng, B.R. Ellis, C.A. Peters, J.P. Fitts, D. Crandall, G.S. Bromhal, Modifications of carbonate fracture hydrodynamic properties by CO2-acidified brine flow, Energy Fuels 27 (8) (2013) 4221-4231.

[41] S. Solomon, Criteria for Intermediate Storage of Carbon Dioxide in Geological Formations, The Bellona Foundation, Oslo, 2006.

[42] K.P. Erickson, C. Lempp, H. Pöllmann, Geochemical and geomechanical effects of scCO₂ and associated impurities on physical and petrophysical properties of Permotriassic Sandstones (Germany): an experimental approach, Environ. Earth Sci. 74 (6) (2015) 4719-4743.

[43] D. Espinoza, S. Kim, J. Santamarina, CO₂ geological storagedgeotechnical implications, KSCE J. Civ. Eng. 15 (4) (2011) 707-719.

[44] L. Zhang, B. Ren, H. Huang, Y. Li, S. Ren, G. Chen, H. Zhang, CO₂ EOR and storage in Jilin oilfield China: monitoring program and preliminary results, J. Pet. Sci. Eng. 125 (2015) 1-12.

[45] J. Rutqvist, The geomechanics of CO₂ storage in deep sedimentary formations, Geotechnical Geol. Eng. 30 (3) (2012) 525-551.

[46] S. Xiaoling, Z. Fangui, L. Hejuan, CO2-CH 4 system mixing properties and enhanced natural gas recovery, Int. J. Digital Content Technol. Appl. 6 (21) (2012).

[47] P.S. Adisoemarta, S.M. Frailey, A.S. Lawal, Measured Z-factor of CO2-Dry Gas/Wet Gas/gas Condensates for CO₂ Storage in Depleted Gas Reservoirs, Society of Petroleum Engineers, 2004.

[48] L. Sobers, S. Frailey, A. Lawal, Geological Sequestration of Carbon Dioxide in Depleted Gas Reservoirs, SPE/DOE Symposium on Improved Oil Recovery, Society of Petroleum Engineers, 2004.

[49] G. Atkinson, S. Bloch, M. Scheihing, Sedimentology and depositional environments of the oligo-miocene gas-bearing succession in the Yacheng 13-1 field, South China Sea, People's Republic of China, AAPG Bull. 74 (1990) 601.

[50] S. Bloch, Empirical prediction of porosity and permeability in sandstones (1), AAPG Bull. 75 (7) (1991) 1145-1160.

[51] J. McGowen, S. Bloch, Depositional facies, diagenesis, and reservoir quality of ivishak sandstone (Sadlerochit Group), Prudhoe Bay Field: ABSTRACT, AAPG Bull. 69 (2) (1985), 286-286.

[52] Y. Cinar, O. Bukhteeva, P.R. Neal, W.G. Allinson, L. Paterson, CO₂ storage in low permeability formations, in: SPE Symposium on Improved Oil Recovery, 20-23 April, Tulsa, Oklahoma, USA, 2008.

[53] S.M. Ghaderi, D.W. Keith, Y. Leonenko, Feasibility of injecting large volumes of CO₂ into aquifers, Energy Procedia 1 (1) (2009) 3113-3120.

[54] H.K.H. Olierook, C. Delle Piane, N.E. Timms, L. Esteban, R. Rezaee, A.J. Mory, L. Hancock, Facies-based rock properties characterization for CO₂ sequestration: GSWA Harvey 1 well, Western Australia, Mar. Pet. Geol. 50 (2014) 83-102.

[55] R. Gholami, V. Rasouli, B. Aadnoy, M. Mohammadnejad, Geomechanical and Numerical Studies of Casing in Reservoir with Solid Production, Rock Mechanics and Rock Engineering 49 (4) (2015) 1441-1460.

[56] R. Gholami, V. Rasouli, B. Aadnoy, R. Mohammadi, Application of in-situ stress estimation methods in wellbore stability analysis under isotropic and anisotropic conditions, J. Geophys. Eng. 12 (4) (2015) 1-17.

[57] R. Gholami, M. Rabie, V. Rasouli, B. Aadnoy, N. Fakhari, Application of quantitate risk assessment in wellbore stability analysis, J. Pet. Sci. Eng. 135 (2015) 185-200.

[58] Senergy, Interactive Petrophysics, Senergy Limited-IP Help Manual, Scotland, 2014, pp. 798-1013.

[59] E. Fjær, R. Holt, P. Horsrud, A. Raaen, R. Risnes, Geological Aspects of Petroleum Related Rock Mechanics, Developments in Petroleum Science, 2008, pp. 103-133.

[60] H.F. Wang, Theory of Linear Poroelasticity, Princeton University Press, Princeton, 2000.

[61] I.D.R. Bradford, J. Fuller, P.J. Thompson, T.R. Walsgrove, Benefits of Assessingbthe Solids Production Risk in a North Sea Reservoir Using Elastoplastic Modeling, SPE/ISRM Eurock '98 held in Trondheim, Norway, 1998, pp. 261-269.

[62] R. Plumb, Influence of Composition and Texture on the Failure Properties of Clastic Rocks, Rock Mechanics in Petroleum Engineering, Society of Petroleum Engineers, 1994, pp. 1-7.