Development and performance evaluation of a high temperature resistant, internal rigid, and external flexible plugging agent for water-based drilling fluids

Abstract

During the drilling process for oil and gas production, a larger number of drilling fluids invade the formation, causing severe formation damage and wellbore collapsing, which seriously hinders the efficient production of deep oil and gas. Although several plugging agents have been developed for efficient fracture sealing in recent years, the development of high-performance plugging agents with self-adaptive ability and high-temperature resistance remain a challenge. Herein, we report the synthesis of an internal rigid and external flexible plugging agent PANS by reversed-phase emulsion polymerization with nano-silica as the rigid core and poly (acrylamide-co-N-vinylpyrrolidone) as a flexible shell. The plugging agent has a median particle size of 10.5 μm and can self-adapt to seal the microfractures and fractures in the formation, leading to an effective reduction in the filtration loss of bentonite water-based drilling fluid under both low temperature and low pressure (LTLP) and high temperature and high pressure (HTHP) conditions. In addition, compared with the neat nano-silica (500 nm), the sealing efficiency of PANS toward 100-120 mesh sand bed was increased by 71.4% after hot rolling at 180°C.

Keywords

Internal rigidity / External flexibility / Plugging agent / Filter loss reduction / Plugging performance

Acknowledgements

This research was financially supported by the Natural Science Foundation of China (Grants 51904328).

References

[1] J. Dai, S. Huang, Y. Liu, Significant advancement in natural gas exploration and development in China during the past sixty years, Oil Gas Geol. 31 (6) (2010) 689-698.

[2] M.-C. Li, Q. Wu, K. Song, Y. Qing, Y.Q. Wu, Cellulose nanoparticles as modifiers for rheology and fluid loss in bentonite water-based fluids, ACS Appl. Mater. Interfaces 7 (8) (2015) 5006-5016.

[3] M.-C. Li, Q. Wu, R.J. Moon, M.A. Hubbe, M.J. Bortner, Rheological aspects of cellulose nanomaterials: governing factors and emerging applications, Adv. Mater. 33 (21) (2021), 2006052.

[4] Y. Feng, K.E. Gray, Review of fundamental studies on lost circulation and wellbore strengthening, J. Petrol. Sci. Eng. 152 (2017) 511-522.

[5] H.Y. Zhong, X. Gao, X.B. Zhang, A. Chen, W. Huang, Minimizing the filtration loss of water-based drilling fluid with sustainable basil seed powder, Petroleum 8 (1) (2021) 39-52.

[6] A. Aftab, M. Ali, M. Arif, S. Panhwar, S. Lglauer, Influence of tailor-made TiO₂/API bentonite nanocomposite on drilling mud performance: towards enhanced drilling operations, Appl. Clay Sci. 199 (2020), 105862.

[7] Y.X. An, G.C. Jiang, Y.R. Qi, X.B. Huang, H. Shi, High-performance shale plugging agent based on chemically modified graphene, J. Nat. Gas Sci. Eng. 32 (2016) 347-355.

[8] J. Cai, M.E. Chenevert, M.M. Sharma, J. Friedheim, Decreasing water invasion into Atoka shale using nonmodified silica nanoparticles, SPE Drill. Complet. 27 (2012) 103-112, 01.

[9] O. Mahmoud, H.A. Nasr-El-Din, Z. Vryzas, V.C. Kelessidis, Nanoparticle-based Drilling Fluids for Minimizing Formation Damage in HP/HT Applications, SPE178949, 2016.

[10] X.M. Su, Z.H. Lian, J.W. Fang, H.Q. Xiong, R.N. Wu, Y. Yuan, Lost circulation material for abnormally high temperature and pressure fractured-vuggy carbonate reservoirs in Tazhong block, Tarim Basin, NW China, Petrol. Explor. Dev. 46 (1) (2019) 173-180.

[11] L. Ma, P.Y. Luo, Y. He, Y.L. Zhang, F. Yi, Z.J. Jiang, Ultra-stable silica nanoparticles as nano-plugging additive for shale exploitation in harsh environments, Nanomaterials 9 (12) (2019) 1683.

[12] Y. Pan, C.P. Li, L.M. Zhang, S.C. Yang, M.Y. Sun, H.M.A. Abouleilah, Research progress of temperature resistance and pressure bearing plugging agent, Appl. Chem. Ind. 49 (2020) 476-482, 02.

[13] H.J. Yang, Y. Wang, Y.P. Zhang, A Study on Recombination Gel Systems of Organic Chromium (III)/HPAM Gels, Xinjiang Oil & Gas, 2001, pp. 43-45+48, 04.

[14] F.X. Zhang, X.T. Yang, H.T. Liu, J.Q. Wang, Preparations and performance of gel bridge plugging agent for wellhole plugging, Xinjiang Oil & Gas 11 (2015) 29-32+2, 03.

[15] H. Jia, H. Chen, S. Guo, Fluid loss control mechanism of using polymer gel pill based on multi-crosslinking during overbalanced well workover and completion, Fuel 210 (2017) 207-216.

[16] B.C. Yan, G.C. Jiang, W.J. Hu, X. Xiang, Z.Q. Deng, Study on high temperature delayed crosslinking PAM gel LCM, Drill. Fluid Complet. Fluid 36 (2019) 679-682, 06.

[17] H. Li, K.H. Lv, X.B. Huang, Z. Lu, D.D. Xiao, The synthesis of polymeric nanospheres and the application as high-temperature nano-plugging agent in water based drilling fluid, Front. Chem. 8 (2020) 247.

[18] M. Ali, H.H. Jarni, A. Aftab, A.R. Ismail, M. Sarmadivaleh, Nanomaterial based drilling fluids for exploitation of unconventional reservoirs: a review, Energies 13 (13) (2020) 3417.

[19] A.S. Tawfik, A.I. Mukaila, Synthesis of Amyl Ester Grafted on Carbon-Nanopolymer Composite as an Inhibitor for Cleaner Shale Drilling, Petroleum, 2021.

[20] T.M. Lu, F. Yuan, D.Z. Li, Laboratory study on high salinity resistant polymer gel system, Xinjiang Oil & Gas 8 (S1) (2012) 96-100+10.

[21] R.B. James, D.I. Catalin, J.H. Thomas, Lost Circulation Control: Evolving Techniques and Strategies to Reduce Downhole Mud Losses, SPE66735, 2001.

[22] E. Lecolier, B. Herzhaft, L. Rousseau, B. Quillien, J. Kieffer, Development of a Nanocomposite Gel for Lost Circulation Treatment, SPE94686, 2005.

[23] J. Sun, M.R. Cui, H. Chen, Y. Ma, L. Chen, Development and production of a new type composite lost circulation materials, J. Southwest Petrol. Univ. (S2) (2007), 133-135+180-181.

[24] M. Sadeghalvaad, S. Sabbaghi, The effect of the TiO₂/polyacrylamide nanocomposite on water-based drilling fluid properties, Powder Technol. 272 (2015) 113-119.

[25] F. Pan, Y.S. Pan, Study on inert materials and polymer plugging technology, Contemp. Chem. Ind. 45 (11) (2016) 2567-2569.

[26] Z. Zhang, Research of Flexible Particle Plugging Agent on Drilling Fluid, China University of Petroleum (East China), Qingdao, 2018.

[27] W.Z. Zhang, J.S. Sun, Y.R. Bai, W. Li, B. Wang, K.H. Lv, A high temperature resistant gel reinforced with fiber used for lost circulation, Drill. Complet. Fluid. 37 (2020) 269-274, 03.

[28] Z. Xu, J.S. Sun, K.H. Lv, J.P. Liu, D.L. Hou, C. Ke, Y.W. Sun, Research and development of a novel internal rigid external soft plugging agent, Drill. Complet. Fluid. 37 (2020) 726-730, 06.

[29] F. Liu, Z. Zheng, X.Y. Wang, X.Q. Li, Z.X. Zhang, X.W. Wang, X.D. Dai, Y.P. Xin, Q.X. Liu, H.L. Yao, S.Y. Jiang, C. Liu, X.Y. Li, Novel modified nano-silica/polymer composite in water-based drilling fluids to plug shale pores, Energy Sources, Part A Recovery, Util. Environ. Eff. 1 (17) (2021).

[30] Rp API, Recommended practice for field testing water-based drilling fluids, API Recommentat. 13B-1 (2009).

[31] ANSI/API, Recommended Practice for Laboratory Testing of Drilling Fluids, 13I, 2009.

[32] X.L. Chu, B. Chen, J.Y. Li, D. Liu, Y.P. Xu, Progresses and perspectives of near infrared spectroscopy analytical technology, J. Instrum. Anal. 39 (10) (2020) 1181-1188.

[33] S. Brill, N. Lilimu, D. Chetty, Diamond fingerprinting for source discrimination using laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS) and Fourier transform infrared spectrometry (FTIR), Heliyon 6 (12) (2020), e05592.

[34] W.X. Zhu, X.H. Zheng, Application of modified starch in high-temperatureresistant colloidal gas aphron (CGA) drilling fluids, J. Polym. Eng. 41 (6) (2021) 458-466.

[35] J.Y. Ma, Y.X. An, P.Z. Yu, Core-shell structure acrylamide copolymer grafted on nano-silica surface as an anti-calcium and anti-temperature fluid loss agent, J. Mater. Sci. 54 (7) (2019) 5927-5941.

[36] Y.X. An, G.C. Jiang, Y.R. Qi, Q.Y. Ge, L.Y. Zhang, Y.J. Ren, Synthesis of nanoplugging agent based on AM/AMPS/NVP terpolymer, J. Petrol. Sci. Eng. 135 (2015) 505-514.

[37] H.Y. Yun, W.J. Zhao, B.K. Liu, C.C. Zhou, F.M. Zhou, Researching rock pore structure with T2 distribution, Well Logging Technol. (2002) 18-21+89, 01.

[38] J.P. Yan, X. He, S.L. Zhang, C.Z. Feng, J. Wang, Q.H. Hu, J.G. Cai, M. Wang, Sensitive parameters of NMR T2 spectrum and their application to pore structure characterization and evaluation in logging profile: a case study from Chang 7 in the Yanchang Formation, Heshui area, Ordos Basin, NW China, Mar. Petrol. Geol. 111 (2020) 230-239.

[39] M. Mehana, I. Elmonier, Shale characteristics impact on Nuclear Magnetic Resonance (NMR) fluid typing methods and correlations, Petroleum 2 (2) (2016) 138-147.

[40] G.Z. Tong, D. Li, S.X. Wang, Y.J. Wu, The application of nuclear magnetic resonance tech in acidizing research for low permeability sandstone reservoir, Xinjiang Oil & Gas (2006) 69-71+76+105, 03.

[41] M.-C. Li, Z.J. Tang, C.Z. Liu, R.Z. Huang, M.S. Koo, G.Q. Zhou, Q.L. Wu, Waterredispersible cellulose nanofiber and polyanionic cellulose hybrids for highperformance water-based drilling fluids, Ind. Eng. Chem. Res. 59 (32) (2020) 14352-14363.

[42] C. Breen, The characterisation and use of polycation-exchanged bentonites, Appl. Clay Sci. 15 (1-2) (1999) 187-219.

[43] C. Ryen, H.C.H. Darley, G.R. Gray, Chapter 4-clay Mineralogy and the Colloid Chemistry of Drilling Fluids, Composition and Properties of Drilling and Completion Fluids, 2016, pp. 93-134.

[44] F. Min, C. Peng, S. Song, Hydration layers on clay mineral surfaces in aqueous solutions: a review, Arch. Min. Sci. 59 (2) (2014) 489-500.

[45] M.-C. Li, Q.L. Wu, J.Q. Han, C.T. Mei, T.Z. Lei, S. Lee, J. Gwon, Overcoming salt contamination of bentonite water-based drilling fluids with blended bualfunctionalized cellulose nanocrystals, ACS Sustain. Chem. Eng. 8 (31) (2020) 11569-11578.

[46] M.-C. Li, Q.L. Wu, T.Z. Lie, C.T. Mei, X.W. Xu, S. Lee, J. Gwon, Thermothickening drilling fluids containing bentonite and dual-functionalized cellulose nanocrystals, Energy Fuels 34 (7) (2020) 8206-8215.