Ultrahigh fatigue resistance enabled by heterostructural design

Abstract

Enhancing the fatigue resistance of metals remains a significant challenge in materials engineering. This study demonstrates that titanium exhibits remarkable fatigue resistance when heterostructures are introduced via additive manufacturing. Compared to homogeneously structured titanium, heterostructured titanium shows a remarkable 141% improvement in fatigue strength and a 53% enhancement in fatigue ratio. The heterostructure promotes the formation of high-density geometrically necessary dislocations, leading to hetero-deformation-induced strengthening under cyclic loading. This process enhances structural stability, suppressing fatigue crack initiation and propagation, thus improving fatigue resistance. These findings suggest that heterogeneity is a promising strategy for enhancing fatigue resistance across various alloy systems.

Keywords

Additive manufacturing / heterostructure / Ti / mechanical properties / fatigue properties

References

[1] Li L,Zhang P.A review on the fatigue cracking of twin boundaries: crystallographic orientation and stacking fault energy.Prog Mater Sci2023;131:101011

[2] Pineau A,Pardoen T.Failure of metals III: fracture and fatigue of nanostructured metallic materials.Acta Mater2016;107:508-44

[3] Liu R,Zhang ZJ,An XH.Exploring the fatigue strength improvement of Cu-Al alloys.Acta Mater2018;144:613-26

[4] Koyama M,Wang MM.Bone-like crack resistance in hierarchical metastable nanolaminate steels.Science2017;355:1055-7

[5] Qu Z,Liu R.High fatigue resistance in a titanium alloy via near-void-free 3D printing.Nature2024;626:999-1004

[6] Zhao Q,Hu J,Yang K.Ultra-high cycle fatigue and ultra-slow crack growth behavior of additively manufactured AlSi7Mg alloy.Int J Struct Integr2024;15:382-407

[7] Liu R,Zhang ZJ,Zhang ZF.A practical model for efficient anti-fatigue design and selection of metallic materials: I. Model building and fatigue strength prediction.J Mater Sci Technol2021;70:233-49

[8] Stinville JC,Cervellon A.On the origins of fatigue strength in crystalline metallic materials.Science2022;377:1065-71

[9] Yang S,Díaz A,Su X.Probabilistic modeling of uncertainties in reliability analysis of mid-and high-strength steel pipelines under hydrogen-induced damage.Int J Struct Integr2025;16:39-59

[10] Pineau A,Busso EP.Failure of metals II: fatigue.Acta Mater2016;107:484-507

[11] Renk O,Gammer C,Pippan R.Achieving 1 GPa fatigue strength in nanocrystalline 316L steel through recovery annealing.Scr Mater2022;217:114773

[12] Pan Q.Fatigue in metals and alloys.Nat Mater2025;1-9

[13] Wang B,Duan QQ.Synchronously improved fatigue strength and fatigue crack growth resistance in twinning-induced plasticity steels.Mater Sci Eng A2018;711:533-42

[14] Lu L,Hattar K.Fatigue and fracture of nanostructured metals and alloys.MRS Bull2021;46:258-64

[15] Wang XQ.Oxygen-gradient titanium with high strength, strain hardening and toughness.Acta Mater2023;246:118674

[16] Dan X,Song Z.Exceptional strength and ductility in heterogeneous multi-gradient TiAl alloys through additive manufacturing.Acta Mater2024;281:120395

[17] Wu D,Zhang T.Heterostructures enhance simultaneously strength and ductility of a commercial titanium alloy.Acta Mater2023;257:119182

[18] Li X,Li J,Gao H.Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys.Nat Rev Mater2020;5:706-23

[19] Cheng Z,Lu Q,Lu L.Extra strengthening and work hardening in gradient nanotwinned metals.Science2018;362:eaau1925

[20] Ren CX,Hou JP,Zhang ZF.The nature of the maximum microhardness and thickness of the gradient layer in surface-strengthened Cu-Al alloys.Acta Mater2021;215:117073

[21] Liu Z,Wang P.Additive manufacturing of metals: microstructure evolution and multistage control.J Mater Sci Technol2022;100:224-36

[22] Wu X,Yuan F.Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility.Proc Natl Acad Sci U S A2015;112:14501-5

[23] Lee HH,Park HK.Unique microstructure and simultaneous enhancements of strength and ductility in gradient-microstructured Cu sheet produced by single-roll angular-rolling.Acta Mater2019;166:638-49

[24] Zhang Y,Lu L.Strain gradient plasticity in gradient structured metals.J Mech Phys Solids2020;140:103946

[25] Zhang Y,Yu Q.Nacre-like surface nanolaminates enhance fatigue resistance of pure titanium.Nat Commun2024;15:6917

[26] Jiang XP,Li JX.Enhancement of fatigue and corrosion properties of pure Ti by sandblasting.Mater Sci Eng A2006;429:30-5

[27] Wang Q,Xiao L.Effect of surface nanocrystallization on fatigue behavior of pure titanium.J Mater Eng Perform2015;25:241-9

[28] Li X,Guan B.Elucidating the effect of gradient structure on strengthening mechanisms and fatigue behavior of pure titanium.Int J Fatigue2021;146:106142

[29] Kim WJ,Kim HK.Fatigue strength of ultrafine-grained pure Ti after severe plastic deformation.Scr Mater2006;54:1745-50

[30] Fintová S,Chlup Z.Grain refinement effect on fatigue life of two grades of commercially pure titanium.Int J Fatigue2023;176:107883

[31] Lu K,Knöpfle F.Effective and back stresses evolution upon cycling a high-entropy alloy.Mater Res Lett2022;10:369-76

[32] Zhu Y.Perspective on hetero-deformation induced (HDI) hardening and back stress.Mater Res Lett2019;7:393-8

[33] Fang XT,Zheng C.Effect of heterostructure and hetero-deformation induced hardening on the strength and ductility of brass.Acta Mater2020;186:644-55

[34] Wang C,Shi S.Origin mechanism of heterostructure nanograins with gradient grain size suppressing strain localization.Mater Sci Eng A2023;885:145584

[35] Li LL,Zhang P,Zhang ZF.Controllable fatigue cracking mechanisms of copper bicrystals with a coherent twin boundary.Nat Commun2014;5:3536

[36] Zhang Z.Comparison of fatigue cracking possibility along large-and low-angle grain boundaries.Mater Sci Eng A2020;284:285-91

[37] Hamada AS,Surya PKCV.Fatigue behavior of ultrafine-grained and coarse-grained Cr-Ni austenitic stainless steels.Mater Sci Eng A2011;528:3890-6

[38] Schouwenaars R,Van Houtte P.The stress field of an array of parallel dislocation pile-ups: implications for grain boundary hardening and excess dislocation distributions.Acta Mater2010;58:4344-53

[39] Stricker M,Gumbsch P.Irreversibility of dislocation motion under cyclic loading due to strain gradients.Scr Mater2017;129:69-73

[40] Qu Z,Zhu YK.Coupling effects of microstructure and defects on the fatigue properties of laser powder bed fusion Ti-6Al-4V.Addit Manuf2023;61:103355

[41] Kahlin M,Basu D.Improved fatigue strength of additively manufactured Ti6Al4V by surface post processing.Int J Fatigue2020;134:105497