High-pressure modulation of band gap and microstructure in N-type high-entropy strontium titanate for enhanced thermoelectric performance

Abstract

In thermoelectrics, optimizing both carrier and phonon transport is crucial for enhancing thermoelectric performance. Strontium titanate, a representative N-type oxide thermoelectric material, often exhibits inferior figure of merit (zT) due to its large band gap that limits carrier concentration, and high lattice thermal conductivity, attributed to strong Ti-O covalent bonds. Conventional approaches, such as aliovalent doping to increase carrier concentration or introducing structural defects to reduce lattice thermal conductivity, are insufficient as they fail to decouple the interdependent electrical and thermal properties. Herein, we introduce a high-pressure synthesis technique that concurrently modulates both the band gap and microstructure. This approach effectively enhances the carrier concentration by narrowing the band gap and increases the effective mass of the density of states through enhanced solubility limit of rare earth elements, significantly improving the power factor. Additionally, high-pressure condition induces microstructural defects, including point defects, dislocations, lattice distortions, and nanoscale grains, which promote broad-wavelength phonon scattering and minimize lattice thermal conductivity. Consequently, a peak zT value of 0.25 at 973 K is attained in high-entropy (Sr_0.2La_0.2Nd_0.2Sm_0.2Eu_0.2)TiO₃ synthesized at 5 GPa, representing a 5.3-fold improvement over undoped strontium titanate. This work highlights the pivotal role of high-pressure synthesis in decoupling the carrier and phonon transport in thermoelectrics.

Keywords

Thermoelectric / strontium titanate / high pressure / band gap / microstructure

References

[1] Shi XL,Chen ZG.Advanced thermoelectric design: from materials and structures to devices.Chem Rev2020;120:7399-515

[2] He J.Advances in thermoelectric materials research: looking back and moving forward.Science2017;357:eaak9997

[3] Zhu T,Fu C,Snyder JG.Compromise and synergy in high-efficiency thermoelectric materials.Adv Mater2017;29

[4] Wu Y,Chen Z.Thermoelectric enhancements in PbTe alloys due to dislocation-induced strains and converged bands.Adv Sci2020;7:1902628

[5] Tan G,Kanatzidis MG.Rationally designing high-performance bulk thermoelectric materials.Chem Rev2016;116:12123-49

[6] Xiao Y,Hong T.Ultrahigh carrier mobility contributes to remarkably enhanced thermoelectric performance in n-type PbSe.Energy Environ Sci2022;15:346-55

[7] Li J,Chen Z.Low-symmetry rhombohedral GeTe thermoelectrics.Joule2018;2:976-87

[8] Li M,Xu SD.Optimizing electronic quality factor toward high-performance Ge_1-x-yTa_xSb_yTe thermoelectrics: the role of transition metal doping.Adv Mater2021;33:e2102575

[9] Wang M,Fang X.Engineering the p-n switch: mastering intrinsic point defects in Sb₂Te₃-dominant alloys.Acta Mater2024;266:119675

[10] Zhong J,Lyu T.Nuanced dilute doping strategy enables high-performance GeTe thermoelectrics.Sci Bull2024;69:1037-49

[11] Zhou Y,Hong M.Orchestrating phase transition in GeTe thermoelectrics: an investigation into the role of electronegativity.Nano Energy2024;127:109723

[12] Yao W,Lyu T.Two-step phase manipulation by tailoring chemical bonds results in high-performance GeSe thermoelectrics.Innovation2023;4:100522 PMCID:PMC10616397

[13] Huang Y,Zeng M.Manipulation of metavalent bonding to stabilize metastable phase: a strategy for enhancing zT in GeSe.Interdiscip Mater2024;3:607-20

[14] Hu L,Lyu T.In situ design of high-performance dual-phase GeSe thermoelectrics by tailoring chemical bonds.Adv Funct Mater2023;33:2214854

[15] Li Y,Wang M.Leveraging crystal symmetry for thermoelectric performance optimization in cubic GeSe.Rare Met2024;43:5332-45

[16] Pan L,Zhang J.Synergistic effect approaching record-high figure of merit in the shear exfoliated n-type Bi₂O_2-2xTe_2xSe.Nano Energy2020;69:104394

[17] Pei YL,Wu D,He J.High thermoelectric performance realized in a BiCuSeO system by improving carrier mobility through 3D modulation doping.J Am Chem Soc2014;136:13902-8

[18] Butt S,Farooq MU.Enhancement of thermoelectric performance in hierarchical mesoscopic oxide composites of Ca₃Co₄O₉ and La_0.8Sr_0.2CoO₃.J Am Ceram Soc2015;98:1230-5

[19] Wang D,Yao Q.High-temperature thermoelectric properties of Ca₃Co₄O_9+δ with Eu substitution.Solid State Commun2004;129:615-8

[20] Wang Y,Fan H.High temperature thermoelectric response of electron-doped CaMnO₃.Chem Mater2009;21:4653-60

[21] Lan J,Liu Y,Nan C.High thermoelectric performance of nanostructured In₂O₃‐based ceramics.J Am Ceram Soc2012;95:2465-9

[22] Sun J.Thermoelectric properties of n-type SrTiO₃.APL Mater2016;4:104803

[23] Han J,Song Y.Synthesis of SrTiO₃ fibers and their effects on the thermoelectric properties of La_0.1Dy_0.1Sr_0.75TiO₃ ceramics.Electron Mater Lett2019;15:278-86

[24] Lin J,Sie F.Preparation and thermoelectric properties of Nd and Dy co-doped SrTiO₃ bulk materials.Mater Res Bull2020;122:110650

[25] Wang J,Kang H.Record high thermoelectric performance in bulk SrTiO₃ via nano-scale modulation doping.Nano Energy2017;35:387-95

[26] Ohta S,Ohta H.High-temperature carrier transport and thermoelectric properties of heavily La- or Nb-doped SrTiO₃ single crystals.J Appl Phys2005;97:034106

[27] Ohta H,Mune Y.Giant thermoelectric seebeck coefficient of a two-dimensional electron gas in SrTiO₃.Nat Mater2007;6:129-34

[28] Rahman JU,Van Du N.Oxygen vacancy revived phonon-glass electron-crystal in SrTiO₃.J Eur Ceram Soc2019;39:358-65

[29] Du Y,Wu J.Optical properties of SrTiO₃ thin films by pulsed laser deposition.Appl Phys A2003;76:1105-8

[30] Zhu Y,Liu X.Precursor-led grain boundary engineering for superior thermoelectric performance in niobium strontium titanate.ACS Appl Mater Interfaces2023;15:13097-107

[31] Zhang B,Zou T.High thermoelectric performance of Nb-doped SrTiO₃ bulk materials with different doping levels.J Mater Chem C2015;3:11406-11

[32] Zhang P,Lou Z.Reduced lattice thermal conductivity of perovskite-type high-entropy (Ca_0.25Sr_0.25Ba_0.25RE_0.25)TiO₃ ceramics by phonon engineering for thermoelectric applications.J Alloys Compd2022;898:162858

[33] Mizoguchi T,Lee H,Ikuhara Y.Controlling interface intermixing and properties of SrTiO₃-based superlattices.Adv Funct Mater2011;21:2258-63

[34] Wang Q,Wang Z.Low-dimensional Te-based nanostructures.Adv Mater2013;25:3915-21

[35] Park D,Kim J.One-pot fabrication of Ag-SrTiO₃ nanocomposite and its enhanced thermoelectric properties.Ceram Int2019;45:16969-75

[36] Chen Y,Li Y.Enhancement of thermoelectric performance of Sr_1-xTi_0.8Nb_0.2O₃ ceramics by introducing Sr vacancies.J Electron Mater2019;48:1147-52

[37] Wang Z,Zhao H.Behavior of boron and nitrogen impurities in diamonds synthesized at high pressure and high temperature.Int J Refract Met Hard Mater2024;125:106902

[38] Zhao B,Zhang S.Constructing coherent/semi-coherent phase boundaries to enhance toughness of superhard cBN-B composite.IInt J Refract Met Hard Mater2024;123:106785

[39] Xiao G,Qi G.Pressure effects on structure and optical properties in cesium lead bromide perovskite nanocrystals.J Am Chem Soc2017;139:10087-94

[40] Shang Y,Dong J.Ultrahard bulk amorphous carbon from collapsed fullerene.Nature2021;599:599-604

[41] Lyu T,Li Z.High pressure drives microstructure modification and zT enhancement in bismuth telluride-based alloys.ACS Appl Mater Interfaces2023;15:19250-7

[42] Zhang L,Lv J.Materials discovery at high pressures.Nat Rev Mater2017;2:1-16

[43] Ninet S,Dumas P.Experimental and theoretical evidence for an ionic crystal of ammonia at high pressure.Phys Rev B2014;89

[44] Morozova NV,Ovsyannikov SV.Strategies and challenges of high-pressure methods applied to thermoelectric materials.J Appl Phys2019;125:220901

[45] Escobedo J,Leblanc M,Lassila D.Influence of pressure on the microstructural evolution of Ta during shear deformation.Scripta Mater2014;80:21-4

[46] Guo X,Luo Z,Li X.High pressure suppressing grain boundary migration in a nanograined nickel.Scripta Mater2022;214:114656

[47] Yin Z,Yu Y.Synergistically optimized electron and phonon transport of polycrystalline BiCuSeO via Pb and Yb Co-doping.ACS Appl Mater Interfaces2021;13:57638-45

[48] Liu H,Su T.High-thermoelectric performance of TiO_2-x fabricated under high pressure at high temperatures.J Materiomics2017;3:286-92

[49] Wang D,You C.Enhancement of thermoelectric performance in robust ZnO‐based composite ceramics driven by a stepwise optimization strategy.Adv Funct Mater2024;34:2308970

[50] Zhang P,Hu G.In-situ construction of all-scale hierarchical microstructure and thermoelectric properties of (Sr_0.25Ca_0.25Ba_0.25La_0.25)TiO₃/Pb@Bi composite oxide ceramics.J Materiomics2023;9:661-72

[51] Qin M,Zhang P.Enhancement of thermoelectric performance of Sr_0.9La_0.1TiO₃-based ceramics regulated by nanostructures.ACS Appl Mater Interfaces2020;12:53899-909

[52] Qin M,Wang M,Zhang Q.Fabrication and high-temperature thermoelectric properties of Ti-doped Sr_0.9La_0.1TiO₃ ceramics.Ceram Int2016;42:16644-9

[53] Koumoto K,Zhang R,Funahashi R.Oxide thermoelectric materials: a nanostructuring approach.Annu Rev Mater Res2010;40:363-94

[54] Ovsyannikov SV.High-pressure routes in the thermoelectricity or how one can improve a performance of thermoelectrics.Chem Mater2010;22:635-47

[55] Li H,Zhang Y.Thermal conductivity and mechanical properties of as-cast and as-extruded Mg-Zn-Mn alloys.Mat Res2019;22:e20190430

[56] Rodrigues JEFS,Serrano-Sánchez F.Unveiling the structural behavior under pressure of filled M_0.5Co₄Sb₁₂ (M = K, Sr, La, Ce, and Yb) thermoelectric skutterudites.Inorg Chem2021;60:7413-21

[57] Bueno Villoro R,Jung C.Grain boundary phases in NbFeSb half‐heusler alloys: a new avenue to tune transport properties of thermoelectric materials.Adv Energy Mater2023;13:2204321

[58] Hammons JA,Ramos E.Pore and grain chemistry during sintering of garnet-type Li_6.4La₃Zr_1.4Ta_0.6O₁₂ solid-state electrolytes.J Mater Chem A2022;10:9080-90

[59] Guan S,Liang H.The effect of pressure tuning on the structure and mechanical properties of high-entropy carbides.Scripta Mater2022;216:114755

[60] Hu C,Fu C,Zhu T.Carrier grain boundary scattering in thermoelectric materials.Energy Environ Sci2022;15:1406-22

[61] Qin X,Huang W,Liu X.Lanthanide-activated phosphors based on 4f-5d optical transitions: theoretical and experimental aspects.Chem Rev2017;117:4488-527

[62] Liang G,Hu L.(GeTe)_1-x(AgSnSe₂)_x: strong atomic disorder-induced high thermoelectric performance near the ioffe-regel limit.ACS Appl Mater Interfaces2021;13:47081-9

[63] Zhong J,Cheng J.Entropy engineering enhances the thermoelectric performance and microhardness of (GeTe)_1-x(AgSb_0.5Bi_0.5Te₂)_x.Sci China Mater2023;66:696-706

[64] Zhang X.Manipulation of charge transport in thermoelectrics.npj Quant Mater2017;2:71

[65] Li J,Lin S,Pei Y.Realizing the high thermoelectric performance of GeTe by Sb-doping and Se-alloying.Chem Mater2017;29:605-11

[66] Tritt TM.Thermoelectric materials, phenomena, and applications: a bird’s eye view.MRS Bull2006;31:188-98

[67] Snyder GJ,Wood M,Snyder BH.Weighted mobility.Adv Mater2020;32:e2001537

[68] Liu Y,Liu Y.Remarkable enhancement in thermoelectric performance of BiCuSeO by Cu deficiencies.J Am Chem Soc2011;133:20112-5

[69] Liu Y,Shi Z,Shen Z.Preparation of Ca₃Co₄O₉ and improvement of its thermoelectric properties by spark plasma sintering.J Am Ceram Soc2005;88:1337-40

[70] Zhang P,Qin M.High-entropy (Ca_0.2Sr_0.2Ba_0.2La_0.2Pb_0.2)TiO₃ perovskite ceramics with a-site short-range disorder for thermoelectric applications.J Mater Sci Technol2022;97:182-9

[71] Feng X,Nomura N.Graphene promoted oxygen vacancies in perovskite for enhanced thermoelectric properties.Carbon2017;112:169-76

[72] Banerjee R,Ranjan M.High-entropy perovskites: an emergent class of oxide thermoelectrics with ultralow thermal conductivity.ACS Sustainable Chem Eng2020;8:17022-32

[73] Li Y,Ahmad K,Koumoto K.Localized vibration and avoided crossing in SrTi₁₁O₂₀ for oxide thermoelectrics with intrinsically low thermal conductivity.J Mater Chem A2021;9:11674-82

[74] Chen C,Giovannelli F.Influence of Bi on the thermoelectric properties of SrTiO_3-δ.J Materiomics2019;5:88-93