Hot isostatic pressing induced precipitation strengthening at room and high temperature of Ni-Fe-Cr-Al-V high-entropy alloy manufactured by laser powder bed fusion

Abstract

The highly adjustable properties of high-entropy alloys (HEAs) offer great potential for developing superior materials for critical structural applications in high-temperature conditions. In this study, Ni-Fe-Cr-Al-V HEA was manufactured by laser powder bed fusion, which has a unique microstructure composed of dislocation substructure and Face-centered cubic + L1₂ coherent structure and achieves the desired strength-ductility combination. Hot isostatic pressing post-treatment was applied on the laser powder bed fusion-processed HEA to further improve the relative density and optimize the mechanical properties. During the hot isostatic pressing process, the precipitation of L1₂ and B2 phases can be ascribed to the precipitation modes dominated by continuous precipitation and discontinuous precipitation, respectively. With the tensile deformation temperature increasing from 773-1,173 K, the softening degree of HEA increases continuously, and the dominant deformation mechanism evolves from intragranular dislocation slip to grain boundary sliding. At temperatures below 773 K, precipitation strengthening significantly improves tensile strength and ductility. At 1,173 K, the grain boundary strength decreases and grain boundary area increases, which promotes grain boundary sliding and contributes to plastic deformation, resulting in significant softening.

Keywords

Laser powder bed fusion / high-entropy alloy / hot isostatic pressing / precipitation strengthening / mechanical property

References

[1] Yeh JW,Lin SJ.Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes.Adv Eng Mater2004;6:299-303

[2] Cantor B,Knight P.Microstructural development in equiatomic multicomponent alloys.Mater Sci Eng A2004;375-7:213-8

[3] Kotadia HR,Das A.A review of laser powder bed fusion additive manufacturing of aluminium alloys: microstructure and properties.Addit Manuf2021;46:102155

[4] Mu Y,Deng S.A high-entropy alloy with dislocation-precipitate skeleton for ultrastrength and ductility.Acta Mater2022;232:117975

[5] He ZF,Ma D,Li ZM.Joint contribution of transformation and twinning to the high strength-ductility combination of a FeMnCoCr high entropy alloy at cryogenic temperatures.Mater Sci Eng A2019;759:437-47

[6] Pang J,Zhang L.A ductile Nb₄₀Ti₂₅Al₁₅V₁₀Ta₅Hf₃W₂ refractory high entropy alloy with high specific strength for high-temperature applications.Mater Sci Eng A2022;831:142290

[7] Cui P,Liu Y.Corrosion behavior and mechanism of dual phase Fe_1.125Ni_1.06CrAl high entropy alloy.Corros Sci2022;201:110276

[8] Yan Y,Delia DJ,Wang K.The oxidation-resistance mechanism of WTaNbTiAl refractory high entropy alloy.Corros Sci2022;204:110377

[9] Liu K,Frank M,Mishra RS.Extremely high fatigue resistance in an ultrafine grained high entropy alloy.Appl Mater Today2019;15:525-30

[10] Chen J,Wang W.A review on fundamental of high entropy alloys with promising high-temperature properties.J Alloys Compd2018;760:15-30

[11] Yurchenko NY,Shaysultanov DG,Salishchev GA.Effect of Al content on structure and mechanical properties of the Al_xCrNbTiVZr (x=0; 0.25; 0.5; 1) high-entropy alloys.Mater Charact2016;121:125-34

[12] Tsao TK,Kuo CM.On the superior high temperature hardness of precipitation strengthened high entropy Ni-based alloys.Adv Eng Mater2017;19:1600475

[13] Bała P,Bednarczyk W,Lech S.Effect of high-temperature exposure on the microstructure and mechanical properties of the Al₅Ti₅Co₃₅Ni₃₅Fe₂₀ high-entropy alloy.J Mater Res Technol2020;9:551-9

[14] Rivera-Díaz-del-Castillo PEJ.Strengthening mechanisms in high-entropy alloys: perspectives for alloy design.J Mater Res2018;33:2970-82

[15] Zhang W,Kooi BJ.Additive manufactured high entropy alloys: a review of the microstructure and properties.Mater Des2022;220:110875

[16] Lin WC,Hsu TH.Microstructure and tensile property of a precipitation strengthened high entropy alloy processed by selective laser melting and post heat treatment.Addit Manuf2020;36:101161

[17] Yao H,He D.High strength and ductility AlCrFeNiV high entropy alloy with hierarchically heterogeneous microstructure prepared by selective laser melting.J Alloys Compd2020;813:152196

[18] Liu L,Zhong Y.Dislocation network in additive manufactured steel breaks strength-ductility trade-off.Mater Today2018;21:354-61

[19] Tascioglu E,Kaynak Y.Influence of heat treatment temperature on the microstructural, mechanical, and wear behavior of 316L stainless steel fabricated by laser powder bed additive manufacturing.Int J Adv Manuf Technol2020;107:1947-56

[20] Saeidi K,Lofaj F,Shen ZJ.Transformation of austenite to duplex austenite-ferrite assembly in annealed stainless steel 316L consolidated by laser melting.J Alloys Compd2015;633:463-9

[21] Sun S,Xie Y.Two-step heat treatment for laser powder bed fusion of a nickel-based superalloy with simultaneously enhanced tensile strength and ductility.Addit Manuf2021;46:102168

[22] du Plessis A, Macdonald E. Hot isostatic pressing in metal additive manufacturing: X-ray tomography reveals details of pore closure.Addit Manuf2020;34:101191

[23] Shi Q,Li K,Zhou G.Effect of hot isostatic pressing on the microstructure and mechanical properties of 17-4PH stainless steel parts fabricated by selective laser melting.Mater Sci Eng A2021;810:141035

[24] Rezaei A,Rezaeian A.Contribution of hot isostatic pressing on densification, microstructure evolution, and mechanical anisotropy of additively manufactured IN718 Ni-based superalloy.Mater Sci Eng A2021;823:141721

[25] Liang YJ,Wen Y.High-content ductile coherent nanoprecipitates achieve ultrastrong high-entropy alloys.Nat Commun2018;9:4063 PMCID:PMC6170471

[26] Wang L,Zhou S.Precipitation and micromechanical behavior of the coherent ordered nanoprecipitation strengthened Al-Cr-Fe-Ni-V high entropy alloy.Acta Mater2021;216:117121

[27] Gawel R,Grzesik Z.Behaviour of Al, Co, Cr, Ni-based high entropy alloys under high-temperature thermal shock oxidising conditions.Corros Sci2022;198:110116

[28] Kong D,Wei S.About metastable cellular structure in additively manufactured austenitic stainless steels.Addit Manuf2021;38:101804

[29] Zhu ZG,Ng FL.Hierarchical microstructure and strengthening mechanisms of a CoCrFeNiMn high entropy alloy additively manufactured by selective laser melting.Scr Mater2018;154:20-4

[30] Jin M,Dovgyy B.Cyclic plasticity and fatigue damage of CrMnFeCoNi high entropy alloy fabricated by laser powder-bed fusion.Addit Manuf2020;36:101584

[31] Liu Z,He D.Simultaneously improved the strength and ductility of laser powder bed fused Al-Cr-Fe-Ni-V high-entropy alloy by hot isostatic pressing: microcrack closure and precipitation strengthening.J Mater Sci Technol2024;180:55-68

[32] Spierings AB,Eggenberger R.Comparison of density measurement techniques for additive manufactured metallic parts.Rapid Prototyp J2011;17:380-6

[33] Schneider CA,Eliceiri KW.NIH image to imageJ: 25 years of image analysis.Nat Methods2012;9:671-5 PMCID:PMC5554542

[34] Dai Y.On the physical origin of equicohesive temperature for creep.Strength Metals Alloys1989;2:959-64

[35] Wang K,Jiao ZM.Mechanical behaviors and deformation constitutive equations of CrFeNi medium-entropy alloys under tensile conditions from 77 K to 1073 K.Acta Metall Sin2022;59:277-88

[36] Li W,Peng P.Microstructural evolution and deformation behavior of fiber laser welded QP980 steel joint.Mater Sci Eng A2018;717:124-33

[37] Liu Z,Wang P.Additive manufacturing of metals: microstructure evolution and multistage control.J Mater Sci Technol2022;100:224-36

[38] Zhao D,Lai R.Abnormal three-stage plastic deformation in a 17-4 PH stainless steel fabricated by laser powder bed fusion.Mater Sci Eng A2022;858:144160

[39] Zhang H,Yao G,Zhang Y.Effect of annealing treatment on microstructure evolution and deformation behavior of 304 L stainless steel made by laser powder bed fusion.Int J Plasticity2022;155:103335

[40] Vilanova M,Sainz S,Guraya T.The limit of hot isostatic pressing for healing cracks present in an additively manufactured nickel superalloy.J Mater Proc Technol2022;300:117398

[41] Liu Z,Yao H.Heat treatment induced microstructural evolution and strength enhancement of Al-Cr-Fe-Ni-V high-entropy alloy fabricated by laser powder bed fusion.Mater Sci Eng A2022;861:144348

[42] Fang JYC,Luan JH,Fu MW.Dual effects of pre-strain on continuous and discontinuous precipitation of L12-strengthened high-entropy alloys.J Alloys Compd2022;925:166730

[43] Wei LL,Kim J,Yang CG.Ultrahigh strength-high ductility 1 GPa low density austenitic steel with ordered precipitation strengthening phase and dynamic slip band refinement.Mater Sci Eng A2022;838:142829

[44] Shi P,Li Y.Multistage work hardening assisted by multi-type twinning in ultrafine-grained heterostructural eutectic high-entropy alloys.Mater Today2020;41:62-71