The effect of chromium content on the corrosion behavior of ultrafine-grained Cr_xMnFeCoNi high-entropy alloys in sulfuric acid solution

Abstract

Chromium (Cr) plays a critical role in the corrosion resistance of conventional alloys via the formation of a dense Cr oxide-based passive film. However, the exact role of Cr in the corrosion of high-entropy alloys (HEAs) remains unclear. The effect of Cr content on the corrosion behavior of the ultrafine-grained Cr_xMnFeCoNi (x = 0, 0.6, 1, and 1.5) HEAs in the sulfuric acid solution (0.5 M H₂SO₄) was investigated. These HEAs were fabricated using a combination of mechanical alloying and spark plasma sintering. The electrochemical tests show that the passive film was more compact and thicker at higher Cr concentration, but the corrosion rate first increased and then decreased, due to the presence of the nanocrystalline-amorphous phase boundaries in the passive film. Long-time immersion tests show that the corrosion rate increased exponentially with the Cr content, due to the gradual accumulation of the galvanic corrosion.

Keywords

High-entropy alloy / polarization / galvanic corrosion / passive film

References

[1] George E,Tasan C.High entropy alloys: a focused review of mechanical properties and deformation mechanisms.Acta Mater2020;188:435-74

[2] Otto F,Somsen C,Eggeler G.The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy.Acta Mater2013;61:5743-55

[3] Zhang Z,Wang J.Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi.Nat Commun2015;6:10143 PMCID:PMC4682111

[4] Chuang M,Wang W,Yeh J.Microstructure and wear behavior of Al_xCo_1.5CrFeNi_1.5Ti_y high-entropy alloys.Acta Mater2011;59:6308-17

[5] Granberg F,Ullah MW.Mechanism of radiation damage reduction in equiatomic multicomponent single phase alloys.Phys Rev Lett2016;116:135504

[6] Shi Y,Feng R.Homogenization of Al CoCrFeNi high-entropy alloys with improved corrosion resistance.Corros Sci2018;133:120-31

[7] Chen Y,Hung U,Shih H.Microstructure and electrochemical properties of high entropy alloys-a comparison with type-304 stainless steel.Corros Sci2005;47:2257-79

[8] Miracle D,Senkov O,Uchic M.Exploration and development of high entropy alloys for structural applications.Entropy2014;16:494-525

[9] Cantor B,Knight P.Microstructural development in equiatomic multicomponent alloys.Mater Sci Eng A2004;375-377:213-8

[10] Gludovatz B,Catoor D,George EP.A fracture-resistant high-entropy alloy for cryogenic applications.Science2014;345:1153-8

[11] Sun S,Lin H.Temperature dependence of the Hall-Petch relationship in CoCrFeMnNi high-entropy alloy.J Alloy Compd2019;806:992-8

[12] Sieradzki K.A percolation model for passivation in stainless steels.J Electrochem Soc1986;133:1979-80

[13] Yuan S,Zhao Y.Surface chemistry and corrosion behaviour of 304 stainless steel in simulated seawater containing inorganic sulphide and sulphate-reducing bacteria.Corros Sci2013;74:353-66

[14] Tan L,Sridharan K.Corrosion behavior of Ni-base alloys for advanced high temperature water-cooled nuclear plants.Corros Sci2008;50:3056-62

[15] Thomas S,Venkatraman M.Self-repairing oxides to protect zinc: review, discussion and prospects.Corros Sci2013;69:11-22

[16] Qiu Y,Gibson MA,Birbilis N.Corrosion of high entropy alloys.NPJ Mater Degrad2017;1:15

[17] Xiao D,Wu W.Microstructure, mechanical and corrosion behaviors of AlCoCuFeNi-(Cr,Ti) high entropy alloys.Mater Des2017;116:438-47

[18] Wang R,Davies C.Evolution of microstructure, mechanical and corrosion properties of AlCoCrFeNi high-entropy alloy prepared by direct laser fabrication.J Alloy Compd2017;694:971-81

[19] Li QH,Guo ZN.Microstructure and corrosion properties of AlCoCrFeNi high entropy alloy coatings deposited on AISI 1045 steel by the electrospark process.Metall Mater Trans A2013;44:1767-78

[20] Hsu Y,Wu J.Corrosion behavior of FeCoNiCrCux high-entropy alloys in 3.5% sodium chloride solution.Mater Chem Phys2005;92:112-7

[21] Ye Q,Li Z.Microstructure and corrosion properties of CrMnFeCoNi high entropy alloy coating.Appl Surf Sci2017;396:1420-6

[22] Luo H,Mingers AM.Corrosion behavior of an equiatomic CoCrFeMnNi high-entropy alloy compared with 304 stainless steel in sulfuric acid solution.Corros Sci2018;134:131-9

[23] Wang C,Yu Y,Zhang Y.Comparison of the corrosion and passivity behavior between CrMnFeCoNi and CrFeCoNi coatings prepared by argon arc cladding.J Mater Res Technol2020;9:8482-96

[24] Wang C,Yu J,Wang F.Effect of the macro-segregation on corrosion behavior of CrMnFeCoNi coating prepared by arc cladding.J Alloy Compd2020;846:156263

[25] Wang L,Zanna S.Study of the surface oxides and corrosion behaviour of an equiatomic CoCrFeMnNi high entropy alloy by XPS and ToF-SIMS.Corros Sci2020;167:108507

[26] Pang J,Wei X.Oxide MnCr₂O₄ induced pitting corrosion in high entropy alloy CrMnFeCoNi.Materialia2019;6:100275

[27] Li S,Shi L,Ye F.Corrosion behavior and mechanical properties of Al-Zn-Mg aluminum alloy weld.Corros Sci2017;123:243-55

[28] Zhang X.Corrosion behavior of Al-3.0 wt.%Mg alloy by cold-drawing process.Int J Electrochem Sci2020;1727-41

[29] Soltis J.Passivity breakdown, pit initiation and propagation of pits in metallic materials - review.Corros Sci2015;90:5-22

[30] Yan Y,Kang Y.Effects of Zn concentration and heat treatment on the microstructure, mechanical properties and corrosion behavior of as-extruded Mg-Zn alloys produced by powder metallurgy.J Alloy Compd2017;693:1277-89

[31] Park K.Effects of Mn on the localized corrosion behavior of Fe-18Cr alloys.Electrochim Acta2010;55:3421-7

[32] Zhang B,Wu B.Unmasking chloride attack on the passive film of metals.Nat Commun2018;9:2559 PMCID:PMC6028649

[33] Sun J,Liu W.The formation mechanism of corrosion scale and electrochemical characteristic of low alloy steel in carbon dioxide-saturated solution.Corros Sci2012;57:131-8

[34] Rovere C, Alano J, Silva R, Nascente P, Otubo J, Kuri S. Characterization of passive films on shape memory stainless steels.Corros Sci2012;57:154-61

[35] Barsoukov E.Impedance spectroscopy: theory, experiment, and applications second edition. Evgenij Barsoukov and J. Ross Macdonald (eds). John Wiley & Sons, Inc., Hoboken, New Jersey, 2005.J Raman Spectrosc2007;38:122

[36] Kissi M,Hammouti B.Establishment of equivalent circuits from electrochemical impedance spectroscopy study of corrosion inhibition of steel by pyrazine in sulphuric acidic solution.Appl Surf Sci2006;252:4190-7

[37] Tachibana S,Yokota T,Moriya Y.Effect of hot rolling and cooling conditions on intergranular corrosion behavior in Alloy625 clad steel.Corros Sci2015;99:125-33

[38] Aung NN.Effect of grain size and twins on corrosion behaviour of AZ31B magnesium alloy.Corros Sci2010;52:589-94

[39] Kao Y,Chen S.Electrochemical passive properties of AlxCoCrFeNi (x = 0, 0.25, 0.50, 1.00) alloys in sulfuric acids.Corros Sci2010;52:1026-34

[40] Boudin S,Lorang G.Analytical and electrochemical study of passive films formed on nickel-chromium alloys: influence of the chromium bulk concentration.Surf Interface Anal1994;22:462-6

[41] Huang J,Han E.Electrochemical properties and growth mechanism of passive films on Alloy 690 in high-temperature alkaline environments.Corros Sci2010;52:3444-52

[42] Li T,Frankel GS.Localized corrosion: passive film breakdown vs. pit growth stability: part iii. a unifying set of principal parameters and criteria for pit stabilization and salt film formation.J Electrochem Soc2018;165:C762-70

[43] Li T,Frankel G.Localized corrosion behavior of a single-phase non-equimolar high entropy alloy.Electrochim Acta2019;306:71-84

[44] Shi Z,Atrens A.Measurement of the corrosion rate of magnesium alloys using Tafel extrapolation.Corros Sci2010;52:579-88

[45] Asami K,Shimodaira S.An XPS study of the passivity of a series of iron-chromium alloys in sulphuric acid.Corros Sci1978;18:151-60

[46] Quiambao KF,Schreiber DK.Passivation of a corrosion resistant high entropy alloy in non-oxidizing sulfate solutions.Acta Mater2019;164:362-76