Microstructure evolution in laser powder bed fusion-built Fe-Mn-Si shape memory alloy

Abstract

The need for specialty powder composition limits the processing of a wide range of alloy products via the laser powder bed fusion (LPBF) technique. This work extends the adaptability of the LPBF technique by fabricating the first-ever Fe-30Mn-6Si (wt.%) product for potential use as a biodegradable shape memory alloy (SMA). Different LPBF processing parameters were assessed by varying the laser power, scan speed, and the laser re-scan strategy to achieve a fully dense part. The microstructure was found to respond to the processing conditions. For example, the microstructure of the parts produced by the high linear energy density (LED) had a columnar and strong crystallographic texture, while in the low LED, the parts were almost equiaxed and had a weak texture. To explain the evolved microstructure, the thermal history of the LPBF products was computed using the finite element analysis (FEA) of the melt pool gathered from a single-track laser scan experiment. The FEA results showed a varying temperature gradient, cooling and solidification rates, and temperature profile as a function of LED. Then, the relationship of hardness between grain size, phases present, and crystallographic misorientation of the LPBF-built alloy was analysed with reference to a control alloy of similar composition but prepared by arc melting. This study validates the LPBF processability of Fe-Mn-Si SMA and provides a new insight into the influence of processing parameters on the formed microstructure and hardness.

Keywords

Laser powder bed fusion / microstructures / biodegradable / shape memory alloy / Fe-Mn / Fe-Mn-Si / EBSD

References

[1] Sato A,Soma K.Shape memory effect in γ⇌ϵ transformation in Fe-30Mn-1Si alloy single crystals.Acta Metall1982;30:1177-83

[2] Dunne D. Shape memory in ferrous alloys. In phase transformations in steels, Pereloma E, Edmonds DV, editors. Soston, UK: Woodhead Publishing; 2012, pp. 83-125.

[3] Alaneme KK.Reconciling viability and cost-effective shape memory alloy options - a review of copper and iron based shape memory metallic systems.Eng Sci Technol Int J2016;19:1582-92

[4] Carlisle EM. Silicon. In biochemistry of the essential ultratrace elements, Frieden E, editor. Boston, MA: Springer; 1984, pp. 257-91.

[5] Santamaria AB.Manganese exposure, essentiality & toxicity.J Med Res2008;128:484-500

[6] Avila DS,Aschner M.Manganese in health and disease.Met Ions Life Sci2013;13:199-227

[7] Tuschl K,Clayton PT.Chapter Twelve - manganese and the Brain, in international review of neurobiology, Bhatia KP, Schneider SA, editors. Cambridge: Academic Press; 2013, pp. 277-312.

[8] Ahire JH,Mueller A,Chao Y.Synthesis of D-mannose capped silicon nanoparticles and their interactions with MCF-7 human breast cancerous cells.ACS Appl Mater Interfaces2013;5:7384-91

[9] Liu D,Zhang H.Nanostructured porous silicon-solid lipid nanocomposite: towards enhanced cytocompatibility and stability, reduced cellular association, and prolonged drug release.Adv Funct Mater2013;23:1893-902

[10] Kafshgari MH,Harding FJ.Applications of zero-valent silicon nanostructures in biomedicine.Nanomedicine2015;10:2553-71

[11] Fântânariu M,Solcan C.A new Fe-Mn-Si alloplastic biomaterial as bone grafting material: in vivo study.Appl Surf Sci2015;352:129-39

[12] Trincă LC,Mareci D.Evaluation of in vitro corrosion resistance and in vivo osseointegration properties of a FeMnSiCa alloy as potential degradable implant biomaterial.Mater Sci Eng C Mater Biol Appl2021;118:111436

[13] Liu B,Ruan L.In vitro investigation of Fe₃₀Mn₆Si shape memory alloy as potential biodegradable metallic material.Mater Lett2011;65:540-3

[14] Rațoi M,Cimpoeşu N,Constantin B.A potential biodegradable metallic material with shape memory effect based on iron. In structural integrity of welded structures, Murariu AC, editor. Trans Tech Publications; 2013. p. 110-4.

[15] Drevet R,Kadirov P.Tunable corrosion behavior of calcium phosphate coated Fe-Mn-Si alloys for bone implant applications.Metall Mat Trans A2018;49:6553-60

[16] Drevet R,Malikova P.Martensitic transformations and mechanical and corrosion properties of Fe-Mn-Si alloys for biodegradable medical implants.Metall Mat Trans A2018;49:1006-13

[17] Prokoshkin S,Zhukova Y.Effect of thermomechanical treatment on structure and functional fatigue characteristics of biodegradable Fe-30Mn-5Si(wt %) shape memory alloy.Materials2021;14:3327 PMCID:PMC8234611

[18] Babacan N,Hoffmann V.Effect of silver additions on the microstructure, mechanical properties and corrosion behavior of biodegradable Fe-30Mn-6Si.Mater Today Commun2021;28:102689

[19] Wang Y,Dargusch M.Biodegradable shape memory alloys: progress and prospects.Biomaterials2021;279:121215

[20] Del-río L,Sota A.Internal friction associated with ε martensite in shape memory steels produced by casting route and through additive manufacturing: influence of thermal cycling on the martensitic transformation.J Alloys Compd2022;919:165806

[21] Ewald FC,Gustmann T,Krooß P.Laser powder bed fusion processing of Fe-Mn-Al-Ni shape memory alloy-on the effect of elevated platform temperatures.Metals2021;11:185

[22] Ferretto I,Della Ventura N,Lee W.Laser powder bed fusion of a Fe-Mn-Si shape memory alloy.Addit Manuf2021;46:102071

[23] Kim D,Jeon JB,Lee W.Formation of metastable bcc-δ phase and its transformation to fcc-γ in laser powder bed fusion of Fe-Mn-Si shape memory alloy.J Mater Res Technol2021;14:2782-8

[24] Kim D,Kim W,Lee W.Effect of post-heat treatment conditions on shape memory property in 4D printed Fe-17Mn-5Si-10Cr-4Ni shape memory alloy.Mater Sci Eng A2022;852:143689

[25] Kim D,Leinenbach C.3D and 4D printing of complex structures of Fe-Mn-Si-based shape memory alloy using laser powder bed fusion.Adv Mater Int2022;9:2200171

[26] Niendorf T,Krooß P.Microstructural evolution and functional properties of Fe-Mn-Al-Ni shape memory alloy processed by selective laser melting.Metall Mat Trans A2016;47:2569-73

[27] Patriarca L,Carlucci G,Casati R.Pseudoelasticity in FeMnNiAl shape memory alloy lattice structures produced by Laser Powder Bed Fusion.Mater Lett2021;302:130349

[28] Ferretto I,Kim D.Control of microstructure and shape memory properties of a Fe-Mn-Si-based shape memory alloy during laser powder bed fusion.Addit Manuf Lett2022;3:100091

[29] Niendorf T,Hoyer P.Processing of new materials by additive manufacturing: iron-based alloys containing silver for biomedical applications.Metall Mat Trans A2015;46:2829-33

[30] Wiesener M,Taube A.Corrosion properties of bioresorbable FeMn-Ag alloys prepared by selective laser melting.Mater Corros2017;68:1028-36

[31] Mosallanejad MH,Aversa A.In-situ alloying in laser-based additive manufacturing processes: a critical review.J Alloys Compd2021;872:159567

[32] Carter LN,Withers PJ.The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy.J Alloys Compd2014;615:338-47

[33] Yadroitsev I,Smurov I.Parametric analysis of the selective laser melting process.Appl Surf Sci2007;253:8064-9

[34] Krauss H.Investigations on manufacturability and process reliability of selective laser melting.Phys Procedia2013;41:815-22

[35] Yan X,Dong D.Microstructure and mechanical properties of pure copper manufactured by selective laser melting.Mater Sci Eng A2020;789:139615

[36] Rietveld HM.Line profiles of neutron powder-diffraction peaks for structure refinement.Acta Cryst1967;22:151-2

[37] Rietveld HM.A profile refinement method for nuclear and magnetic structures.J Appl Crystallogr1969;2:65-71

[38] Will G.The rietveld method. In powder diffraction. Berlin Heidelberg: Springer; 2006, pp. 41-72.

[39] Degen T,Bron E,Nénert G.The HighScore suite.Powder Diffr2014;29:S13-8

[40] Huang C,Yen H.New protocol for orientation reconstruction from martensite to austenite in steels.Materialia2020;9:100554

[41] Nishiyama Z.In martensitic transformation, Fine ME, editor. Cambridge: Academic Press; 1978, pp. 14-134.

[42] Ansari MJ,Park HS.Investigation of SLM process in terms of temperature distribution and melting pool size: modeling and experimental approaches.Materials2019;12:1272 PMCID:PMC6515213

[43] Li X,Huang H,Sercombe T.Selective laser melting of an Al₈₆Ni₆Y_4.5Co₂La_1.5 metallic glass: processing, microstructure evolution and mechanical properties.Mater Sci Eng A2014;606:370-9

[44] Dong L,Ahzi S.Three-dimensional transient finite element analysis of the selective laser sintering process.J Mater Process Technol2009;209:700-6

[45] Roberts I,Esterlein R,Mynors D.A three-dimensional finite element analysis of the temperature field during laser melting of metal powders in additive layer manufacturing.Int J Mach Tools Manuf2009;49:916-23

[46] Tsujimoto H,Okutani Y. Lifespan enhancement of crane rails, runway girders and overhead cranes using shape-memory alloyed fish-plates; 2017, pp. 72-80.

[47] Cao B.An experimental investigation on rate dependency of thermomechanical and Stress-induced martensitic transformation behavior in Fe-28Mn-6Si-5Cr shape memory alloy under compression.Int J Impact Eng2019;132:103284

[48] ASTM E92-16. Standard test methods for Vickers hardness and Knoop hardness of metallic materials. PA, USA: ASTM International; 2016.

[49] Darvish K,Pasang T.Reducing lack of fusion during selective laser melting of CoCrMo alloy: effect of laser power on geometrical features of tracks.Mater Des2016;112:357-66

[50] Carluccio D,Kent D,Previtali B.Comparative study of pure iron manufactured by selective laser melting, laser metal deposition, and casting processes.Adv Eng Mater2019;21:1900049

[51] Letenneur M,Kreitcberg A,Bailon-Poujol I.Laser powder bed fusion of water-atomized iron-based powders: process optimization.J Manuf Mater Process2017;1:23

[52] Liverani E,Ceschini L.Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316 L austenitic stainless steel.J Mater Process Technol2017;249:255-63

[53] Wang D,Yang Y.Investigation of crystal growth mechanism during selective laser melting and mechanical property characterization of 316 L stainless steel parts.Mater Des2016;100:291-9

[54] Nguyen Q,Ng F,Nai S.High mechanical strengths and ductility of stainless steel 304 L fabricated using selective laser melting.J Mater Sci Technol2019;35:388-94

[55] Kang N,Dembinski L,Coddet C.Microstructure and strength analysis of eutectic Al-Si alloy in-situ manufactured using selective laser melting from elemental powder mixture.J Alloys Compd2017;691:316-22

[56] Hou Y,Zhang H,Wang C.Fabricating homogeneous FeCoCrNi high-entropy alloys via SLM in situ alloying.Metals2021;11:942

[57] Haynes WM. CRC handbook of chemistry and physics. In CRC handbook of chemistry and physics, Haynes WM, Lide DR, editors. Cleveland, Ohio: CRC Press; 2017, pp. 97-126.

[58] Chu J.Volatilization behavior of manganese from molten steel with different alloying methods in vacuum.Metals2020;10:1348

[59] Yang C,Lin K.Improvement of shape memory effect in Fe-Mn-Si alloy by slight tantalum addition.Mater Sci Eng A2009;518:139-43

[60] Watson A.Ternary system Fe-Mn-Si. In ternary steel systems: phase diagrams and phase transition data, Watson A, Markus T, editors. Berlin Heidelberg: Springer; 2015, pp. 121-33.

[61] Tenbrock C,Wissenbach K.Influence of keyhole and conduction mode melting for top-hat shaped beam profiles in laser powder bed fusion.J Mater Process Technol2020;278:116514

[62] Bauereiß A,Körner C.Defect generation and propagation mechanism during additive manufacturing by selective beam melting.J Mater Process Technol2014;214:2522-8

[63] Madison JD.Quantitative characterization of porosity in laser welds of stainless steel.Scripta Materialia2012;67:783-6

[64] He P,Yakubov V.Fatigue and dynamic aging behavior of a high strength Al-5024 alloy fabricated by laser powder bed fusion additive manufacturing.Acta Mater2021;220:117312

[65] DuPont JN.Fundamentals of weld solidification. In Welding Fundamentals and Processes. 2011; pp. 96-114.

[66] Liu B,Li Z.Selective laser remelting of an additive layer manufacturing process on AlSi₁₀Mg.Results Phys2019;12:982-8

[67] Ghayoor M,He Y,Paul BK.Selective laser melting of 304 L stainless steel: role of volumetric energy density on the microstructure, texture and mechanical properties.Addit Manuf2020;32:101011

[68] Pham MS,Hooper PA,Piglione A.The role of side-branching in microstructure development in laser powder-bed fusion.Nat Commun2020;11:749 PMCID:PMC7004990

[69] Lippold JC.Welding metallurgy principles. In welding metallurgy and weldability; 2014. pp. 9-83.

[70] Zhang X,Mao B.Microstructure evolution during selective laser melting of metallic materials: a review.J Laser Appl2019;31:031201

[71] Bertoli U, Macdonald BE, Schoenung JM. Stability of cellular microstructure in laser powder bed fusion of 316 L stainless steel.Mater Sci Eng A2019;739:109-17

[72] Pinomaa T,Walbrühl M,Laukkanen A.The significance of spatial length scales and solute segregation in strengthening rapid solidification microstructures of 316 L stainless steel.Acta Mater2020;184:1-16

[73] Li Y.Parametric analysis of thermal behavior during selective laser melting additive manufacturing of aluminum alloy powder.Mater Des2014;63:856-67

[74] Chen Y,Chen J,Wu Y.Numerical and experimental investigation on thermal behavior and microstructure during selective laser melting of high strength steel.J Manuf Process2020;57:533-42

[75] Jung HY,Prashanth KG.Fabrication of Fe-based bulk metallic glass by selective laser melting: a parameter study.Mater Des2015;86:703-8

[76] Suryawanshi J,Scudino S,Prakash O.Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting.Acta Mater2016;115:285-94

[77] Prashanth K.Formation of metastable cellular microstructures in selective laser melted alloys.J Alloys Compd2017;707:27-34

[78] Guan J,Zhang X.Microstructural evolution and EBSD analysis of AlSi10Mg alloy fabricated by selective laser remelting.Mater Charact2020;161:110079

[79] Xiong Z,Tan C,Ma W.Selective laser melting and remelting of pure tungsten.Adv Eng Mater2020;22:1901352

[80] Herzog D,Wycisk E.Additive manufacturing of metals.Acta Mater2016;117:371-92

[81] Debroy T,Zuback J.Additive manufacturing of metallic components - process, structure and properties.Prog Mater Sci2018;92:112-224

[82] Rafi HK,Gong H,Stucker BE.Microstructures and mechanical properties of Ti₆Al₄V Parts fabricated by selective laser melting and electron beam melting.J Mater Eng Perform2013;22:3872-83

[83] Trevisan F,Lorusso M.On the selective laser melting (SLM) of the AlSi₁₀Mg alloy: process, microstructure, and mechanical properties.Materials2017;10:76 PMCID:PMC5344617

[84] Spierings A,Dumitraschkewitz P,Wegener K.Microstructure characterization of SLM-processed Al-Mg-Sc-Zr alloy in the heat treated and HIPed condition.Addit Manuf2018;20:173-81

[85] Cao S,Lim CVS.Review of laser powder bed fusion (LPBF) fabricated Ti-6Al-4V: process, post-process treatment, microstructure, and property.Light Adv Manuf2021;2:

[86] Nigito E,Husson S,Tsai M.Microstructure of NiTi superelastic alloy manufactured by selective laser melting.Mater Lett2022;324:132665

[87] Attard B,Beetz C,Chiu Y.Microstructural control during laser powder fusion to create graded microstructure Ni-superalloy components.Addit Manuf2020;36:101432

[88] Li X.Numerical investigation of effects of nucleation mechanisms on grain structure in metal additive manufacturing.Comput Mater Sci2018;153:159-69

[89] Antonysamy A,Prangnell P.Effect of build geometry on the β-grain structure and texture in additive manufacture of Ti6Al4V by selective electron beam melting.Mater Charact2013;84:153-68

[90] Mohebbi MS.Implementation of nucleation in cellular automaton simulation of microstructural evolution during additive manufacturing of Al alloys.Addit Manuf2020;36:101726

[91] Yan F,Faierson EJ.Grain structure control of additively manufactured metallic materials.Materials2017;10:1260

[92] Yang M,Yan W.Phase-field modeling of grain evolutions in additive manufacturing from nucleation, growth, to coarsening.NPJ Comput Mater2021;7

[93] Ikeda T,Ikeshoji T.Influences of process parameters on the microstructure and mechanical properties of CoCrFeNiTi based high-entropy alloy in a laser powder bed fusion process.Crystals2021;11:549

[94] Liu D,Yan W.Grain structure evolution in transition-mode melting in direct energy deposition.Mater Des2020;194:108919

[95] Chlebus E,Kuźnicka B,Kurzynowski T.Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting.Mater Sci Eng A2015;639:647-55

[96] Ali H,Mumtaz K.Effect of scanning strategies on residual stress and mechanical properties of Selective Laser Melted Ti₆Al₄V.Mater Sci Eng A2018;712:175-87

[97] Chen C,Zhu H,Zhang L.Effect of overlap rate and pattern on residual stress in selective laser melting.Int J Mach Tools Manuf2019;145:103433

[98] Acharya R,Staroselsky A.Prediction of microstructure in laser powder bed fusion process.Acta Mater2017;124:360-71

[99] Liu P,Xiao Y,Cui X.Insight into the mechanisms of columnar to equiaxed grain transition during metallic additive manufacturing.Addit Manuf2019;26:22-9

[100] Wang T,Zhang S,Wang H.Grain morphology evolution behavior of titanium alloy components during laser melting deposition additive manufacturing.J Alloys Compd2015;632:505-13

[101] Ozcan H,Wang S.Effects of cyclic heat treatment and aging on superelasticity in oligocrystalline Fe-Mn-Al-Ni shape memory alloy wires.Scripta Mater2017;134:66-70

[102] Vollmer M,Kriegel M.Cyclic degradation in bamboo-like Fe-Mn-Al-Ni shape memory alloys - the role of grain orientation.Scripta Mater2016;114:156-60

[103] Ueland SM,Schuh CA.Oligocrystalline shape memory alloys.Adv Funct Mater2012;22:2094-9

[104] Abbaschian R,Reed-Hill RE. Elements of grain boundaries. In physical metallurgy principles, Stamford, CT: Cengage learning; 2009, pp. 158-93.

[105] Callister WD. Dislocations and strengthening mechanisms. In materials science and engineering: an introduction. Hoboken, NJ: Wiley; 2014, pp. 216-50.

[106] Xu Z,Cao P.A comparative study of powder metallurgical (PM) and wrought Fe-Mn-Si alloys.Mater Sci Eng A2015;630:116-24

[107] Fiocchi J,Zilio S,Coda A.The effect of Si addition and thermomechanical processing in an Fe-Mn alloy for biodegradable implants: mechanical performance and degradation behavior.Mater Today Commun2021;27:102447

[108] Bergeon N,Esnouf C.Microstructural analysis of the stress-induced ε martensite in a Fe-Mn-Si-Cr-Ni shape memory alloy: Part I—calculated description of the microstructure.Mater Sci Eng A1998;242:77-86

[109] Gu Q,Delaey L.A review on the martensitic transformation and shape memory effect in Fe-Mn-Si alloys.J Phys1994;04:C3-135

[110] Putaux JL.HREM study of self-accommodated thermal ε-martensite in an F-Mn-Si-Cr-Ni shape memory alloy.Acta Mater1996;44:1701-16

[111] Jang W,Jeeb K,Hong J.The effects of grain size and transformation texture on the shape memory effect in Fe-15Mn-5Cr-5Co-3Si alloy. In Ecomaterials, Yamamoto R, editor. Elsevier. 1994; pp. 993-6.

[112] Käfer KA,Santos ODS,Lima NBD.The influence of microstructure and mechanical resistance on the shape memory of ecae processed stainless Fe-Mn-Si-Cr-Ni-Co steel.Mat Res2018;21

[113] Onuki Y,Shinoda K,Maruyama T.Depletion of manganese in the surface layers of Fe-Mn-Si shape memory alloys by annealing.Defect Diffus Forum2015;363:196-201

[114] Callister WD. Imperfections in solids. In materials science and engineering: an introduction. Hoboken, NJ: Wiley; 2018, pp. 92-120.

[115] Feng YP,Fornell J.Novel Fe-Mn-Si-Pd alloys: insights into mechanical, magnetic, corrosion resistance and biocompatibility performances.J Mater Chem B2016;4:6402-12

[116] Spandana D,Chakravarty D,Hembram K.Fabrication of a biodegradable Fe-Mn-Si alloy by field assisted sintering.Adv Powder Technol2020;31:4577-84

[117] Eskil M.A new formulation for martensite start temperature of Fe-Mn-Si shape memory alloys using genetic programming.Comput Mater Sci2008;43:774-84

[118] Hsu T.Martensitic transformation in Fe-Mn-Si based alloys.Mater Sci Eng A1999;273-275:494-7

[119] Balo ŞN.A comparative study on crystal structure and magnetic properties of Fe-Mn-Si and Fe-Mn-Si-Cr Alloys.J Supercond Nov Magn2013;26:1085-8

[120] Tomota Y,Morris JW.Microstructural dependence of Fe-high Mn tensile behavior.Metall Trans A1986;17:537-47

[121] Zaefferer S,Konijnenberg P.Electron backscatter diffraction (EBSD) techniques for studying phase transformations in steels. In phase transformations in steels, Pereloma E, Edmonds DV, editor. Woodhead Publishing; 2012, pp. 557-87.

[122] Roberts G,Strangwood M.Use of misorientation values to further understand deformation in rail steels.Ironmak Steelmak2013;40:92-7

[123] Wright SI,Field DP.A review of strain analysis using electron backscatter diffraction.Microsc Microanal2011;17:316-29

[124] Brewer LN,Merriman CC.Mapping and assessing plastic deformation using EBSD. In electron backscatter diffraction in materials science, Schwartz AJ, editor. Boston, MA: Springer; 2009, pp. 251-62.

[125] Hou J,Shoji T,Han E.Effects of cold working path on strain concentration, grain boundary microstructure and stress corrosion cracking in Alloy 600.Corros Sci2011;53:2956-62

[126] Hu X,Zhu Y.Quantitative study of microstructural, textural and hardness evolution of high-purity Ti sheet during rolling from low to medium strains.Mater Today Commun2021;29:102989

[127] Qiao D,Pan T,David S.Evaluation of residual plastic strain distribution in dissimilar metal weld by hardness mapping.Sci Technol Weld Join2013;18:624-30

[128] Fukui D,Onaka S.Internal residual stress originated from Bain strain and its effect on hardness in Fe-Ni martensite.Acta Mater2020;196:660-8

[129] Mercelis P.Residual stresses in selective laser sintering and selective laser melting.Rap Prototyp J2006;12:254-65

[130] Vrancken B,Knutsen R.Residual stress via the contour method in compact tension specimens produced via selective laser melting.Scripta Mater2014;87:29-32

[131] Lu L,Wang J,Tu H.Experimental investigation and thermodynamic calculation of the Zn-Fe-Ce system.J Alloys Compd2015;648:881-9

[132] Liu Y,Wang D.A study on the residual stress during selective laser melting (SLM) of metallic powder.Int J Adv Manuf Technol2016;87:647-56

[133] Mishurova T,Artzt K.An assessment of subsurface residual stress analysis in SLM Ti-6Al-4V.Materials2017;10:348 PMCID:PMC5506958