Integrating waste materials in 3D-printed concrete for artificial coral: a pathway to low-carbon and smart coastal cities

Abstract

This study investigates a low-carbon, waste-integrated concrete mixture for fabricating artificial coral units using three-dimensional concrete printing (3DCP). Fly ash from coal combustion and crushed sand from non-hazardous mining waste rock were incorporated at 25% and 50% replacement levels, respectively, to develop a printable, structurally stable mixture. A biomimetic coral geometry was designed and successfully fabricated using an extrusion-based 3DCP system. Mechanical testing was conducted on six flexural and twelve compressive specimens per printing orientation to evaluate anisotropic behavior. The results confirmed adequate mechanical capacity for handling and deployment of the hollow printed modules. A cradle-to-site life cycle assessment revealed that the 3D-printed unit has an embodied carbon footprint of 93.38 kg CO₂e per 300-kg block, representing a consistent 22% reduction compared to a conventional prefabricated counterpart, with formwork-related emissions, material waste, and transport distances standardized. This carbon advantage derives primarily from waste-material substitution and the elimination of temporary formwork. The findings demonstrate that waste-based 3DCP offers a technically feasible and environmentally advantageous solution for artificial reef production, contributing to sustainable, low-carbon, and ecologically responsive coastal infrastructure.

Keywords

3D concrete printing / Artificial coral / Waste-based concrete / Crushed sand / Fly ash / Low-carbon materials / Life cycle assessment

References

[1] Neumann B, Vafeidis AT, Zimmermann J, Nicholls RJ. Future coastal population growth and exposure to sea-level rise and coastal flooding - A global assessment. PLoS ONE, 2015, 103e0118571

[2] Nicholls RJ, et al. A global analysis of subsidence, relative sea-level change and coastal flood exposure. Nature Climate Change, 2021, 114338342.

[3] Ginga CP, Ongpeng JMC, Daly MKM. Circular economy on construction and demolition waste: A literature review on material recovery and production. Materials, 2020, 13132970

[4] Pomponi F, Moncaster A. Circular economy for the built environment: A research framework. Journal of Cleaner Production, 2017, 143: 710-718.

[5] Fisher R, et al. Species richness on coral reefs and the pursuit of convergent global estimates. Current Biology, 2015, 254500505.

[6] Ferrario F, Beck MW, Storlazzi CD, Micheli F, Shepard CC, Airoldi L. The effectiveness of coral reefs for coastal hazard risk reduction and adaptation. Nature Communications, 2014, 513794

[7] Hoegh-Guldberg O, et al. Coral reefs under rapid climate change and ocean acidification. Science, 2007, 318585717371742.

[8] Praneeth, A., Veerabhadra Rao, N., Venkata Sai, J., & Veena, M. (2025). Coral reef ecosystems in crisis: a global review on threats, ecological value and conservation strategies. International Journal of Veterinary Sciences and Animal Husbandry, 10(6), 162–172. https://www.veterinarypaper.com

[9] “Oceans and Coastal Ecosystems and Their Services”, in Climate Change– Impacts. Adaptation and Vulnerability, Cambridge University Press, 2022, 2023: 379-550.

[10] Xiao J, Li W, Fan Y, Huang X. An overview of study on recycled aggregate concrete in China (1996–2011). Construction and Building Materials, 2012, 31: 364-383.

[11] Tam VWY, Soomro M, Evangelista ACJ. A review of recycled aggregate in concrete applications (2000–2017). Construction and Building Materials, 2018, 172: 272-292.

[12] Jahami A, Chamseddine F, Salhab AA, Ibrahim M, Zaiter B, Isleem HF. Enhancing concrete properties with steel waste: A comprehensive review of GGBS, SS, and steel waste utilization. Innovative Infrastructure Solutions, 2024, 910391

[13] Hama SM, Hamadi EF, Jahami A. Structural behavior of reinforced fibrous concrete beams incorporating nano silicon dioxide powder. Engineering Reports, 2025.

[14] Xiao J. Recycled aggregate concrete structures, 2018Springer Berlin Heidelberg

[15] Badran A, Aldabbik W, Al Agha W, Alzein R. Sustainable pavement materials: A comprehensive review of performance, environmental impacts, and implementation challenges. Steps Civil, Constr. Environ. Eng., 2023, 12126.

[16] Jahami, A., Mouzanar, H., Mahfouz, S., Khatib, J., & Sonebi, M. (2023). Effect of graphene as additive on the mechanical properties of concrete. NanoWorld Journal, 9. https://doi.org/10.17756/nwj.2023-s2-015

[17] Jahami A, Dayaa L, Assaad JJ, Baalbaki O, Khatib J. Flexural Strength of Structural Beams Cast Using Combined Normal-Weight and Lightweight Concrete Mixtures. Buildings, 2024, 14123787.

[18] Korniejenko K, Oliwa K, Gądek S, Dynowski P, Źróbek A, Lin WT. A review of additive manufacturing techniques in artificial reef construction: Materials, processes, and ecological impact. Applied Sciences, 2025.

[19] Mendoza, E., Ríos, A., Mariño-Tapia, I., & Silva, R. (2019). Modular coral shaped artificial reefs acting as beach protection barriers. In Goseberg Nils, Schlurmann Torsten (Eds.), Coastal Structures 2019 (pp. 989-997). Bundesanstalt für Wasserbau. https://doi.org/10.18451/978-3-939230-64-9_099

[20] Matus IV, Alves JL, Góis J, Vaz-Pires P, da Rocha AB. Artificial reefs through additive manufacturing: A review of their design, purposes and fabrication process for marine restoration and management. Rapid Prototyping Journal, 2024, 301187122.

[21] Guiraudon, V. (2007). European Court of Justice. EC Tax Review, 16(4): 189–196. https://doi.org/10.54648/ecta2007029

[22] United Nations Department of Economic and Social Affairs. (n.d.). The 17 goals. Retrieved December 7, 2025, from https://sdgs.un.org/#goal_section

[23] Nghĩa, M. (2025). Để “rộng đường” cho tiêu thụ tro xỉ [Widening the path for fly ash and slag consumption]. EVN. Retrieved December 7, 2025, from https://evn.com.vn/d/vi-VN/news/De-rong-duong-cho-tieu-thu-tro-xi-60-8-504738

[24] Duc, P. T. (2019). Research on using original fly ash of Hai Phong thermal power plant as a mineral additive to improve the properties of large concrete blocks. Hai Phong, Vietnam.

[25] Vinacomin. (2024). Thực tiễn và tiềm năng tái sử dụng, tái chế đất đá thải mỏ từ hoạt động khai thác than của Tập đoàn Công nghiệp Than – Khoáng sản Việt Nam (TKV) tại Quảng Ninh [Practice and potential for reuse and recycling of mining waste rock from coal mining activities of Vietnam National Coal – Mineral Industries Holding (TKV) in Quang Ninh] (pp. 46–56).

[26] Department of Climate Change, Energy, the Environment and Water. (2023). National artificial reef guidelines (Version 1.0, pp. 1–106). Australian Government.

[27] Lukens, R. R., & Seelberg, C. (2004). Guidelines for marine artificial reef materials (No. 121). Artificial Reef Subcommittees of the Atlantic and Gulf States Marine Fisheries Commissions.

[28] Yoris-Nobile AI, et al. Artificial reefs built by 3D printing: Systematisation in the design, material selection and fabrication. Construction and Building Materials, 2022, 362August2023.

[29] Zhang Y, Zhang Y, She W, Yang L, Liu G, Yang Y. Rheological and harden properties of the high-thixotropy 3D printing concrete. Construction and Building Materials, 2019, 201: 278-285.

[30] Pham LT, et al. Development of 3D printers for concrete structures: Mix proportion design approach and laboratory testing. Smart and Sustainable Built Environment, 2023, 12510561073.

[31] Ministry of Science and Technology of Vietnam. (2022). Hardened concrete – test method for flexural tensile strength (TCVN 3119: 2022). Ministry of Science and Technology.

[32] Ministry of Science and Technology of Vietnam. (2022). Mortar for masonry – test methods – part 11: determination of flexural and compressive strength of hardened mortars (TCVN 3121-11: 2022). Ministry of Science and Technology.

[33] Ding T, Xiao J, Zou S, Zhou X. Anisotropic behavior in bending of 3D printed concrete reinforced with fibers. Composite Structures, 2020, 254February112808

[34] Liu, B., Liu, X., Li, G., Geng, S., Li, Z., Weng, Y., & Qian, K. (2022). Study on anisotropy of 3D printing PVA fiber reinforced concrete using destructive and non-destructive testing methods. Case Studies in Construction Materials, 17, e01519. https://doi.org/10.1016/j.cscm.2022.e01519

[35] Ding T, Xiao J, Zou S, Wang Y. Hardened properties of layered 3D printed concrete with recycled sand. Cement & Concrete Composites, 2020, 113February103724

[36] Wolfs RJM, Bos FP, Salet TAM. Hardened properties of 3D printed concrete: The influence of process parameters on interlayer adhesion. Cement and Concrete Research, 2019, 119January132140.

[37] Instructables. (n.d.). Build an artificial reef. Retrieved September 5, 2024, from https://www.instructables.com/Build-an-Artificial-Reef/

[38] International Organization for Standardization. (2006). Environmental management – life cycle assessment – principles and framework (ISO 14040: 2006). ISO. https://www.iso.org/obp/ui/en/#iso:std:iso:14040:ed-2:v1:en

[39] International Organization for Standardization. (2006). Environmental management – life cycle assessment – requirements and guidelines (ISO 14044: 2006). ISO. https://www.iso.org/obp/ui/en/#iso:std:iso:14044:ed-1:v1:en

[40] International EPD System. (n.d.). EPD library. Retrieved December 7, 2025, from https://www.environdec.com/library

[41] ecoinvent. (n.d.). Ecoinvent database version 3.12.https://support.ecoinvent.org/environmental-product-declarations-epds

[42] Wernet G, Bauer C, Steubing B, Reinhard J, Moreno-Ruiz E, Weidema B. The ecoinvent database version 3 (part I): Overview and methodology. International Journal of Life Cycle Assessment, 2016, 21912181230.

[43] Ankur, N., & Singh, N. (2022). A review on the life cycle assessment phases of cement and concrete manufacturing. In P. Ghadimi, M. D. Gilchrist, & M. Xu (Eds.), Role of circular economy in resource sustainability (pp. 85–96). Springer. https://doi.org/10.1007/978-3-030-90217-9_8

[44] Manso-Morato, J., Hurtado-Alonso, N., Revilla-Cuesta, V., Skaf, M., & Ortega-López, V. (2024). Fiber-reinforced concrete and its life cycle assessment: a systematic review. Journal of Building Engineering, 94, 110062. https://doi.org/10.1016/j.jobe.2024.110062

[45] Huber F, Laner D, Fellner J. Comparative life cycle assessment of MSWI fly ash treatment and disposal. Waste Management, 2018, 73: 392-403.

[46] China Steel Corporation. (2025). Environmental product declaration for hot rolled coil products (Registration No. EPD-IES-0025946:002). International EPD System. Retrieved February 26, 2026, from https://www.environdec.com

[47] Tighnavard Balasbaneh A, Sher W, Ibrahim MHW. Life cycle assessment and economic analysis of reusable formwork materials considering the circular economy. Ain Shams Engineering Journal, 2024, 154102585

Rights & permissions

The Author(s)