Towards low-carbon deep soil mixing: a complementary review of supplementary cementitious and alkali-activated binders

Abstract

Deep soil mixing (DSM) is a proven in situ ground improvement technique conventionally employing cement/lime as hydraulic binders. Escalating concerns regarding greenhouse gas emissions and chemical durability of these materials have prompted the exploration of sustainable alternatives, notably supplementary cementitious materials (SCMs) and alkali-activated binders (AABs). This review consolidates recent progress in binder innovations, mix design approaches, and performance evaluation for sustainable DSM. Emphasis is placed on microstructural evolution, mechanical and durability characteristics, and field applicability. Publication trend analyses demonstrate the rapid growth of DSM-related research and the increasing focus on sustainable binders over the last 15 years (2011–2025). Reviewed studies indicate that SCM- and AAB-based systems can achieve engineering performance comparable to cement-treated soils under specific mix designs and curing conditions, although differences in soil type, water content, specimen preparation, and curing regime limit direct quantitative comparisons across studies. Binder treatment consistently enhances stiffness, reduces permeability, and improves resistance to consolidation, though the creep and dynamic response of AAB-stabilized soils remain underexplored. Field studies, though limited, indicate that optimized blends can meet or surpass design requirements, although variability and long-term performance remain concerns. Environmental aspects, including leachability, life-cycle assessment, and cost–performance trade-offs of alternative binders, are critically reviewed, and future research priorities are outlined to advance sustainable DSM practices.

Keywords

Soft soil stabilization / Alternative Binders / Mechanical characteristics / Durability / Environmental performance

References

[1] Chen JJ, Zhang L, Zhang JF, Zhu YF, Wang JH. Field tests, modification, and application of deep soil mixing method in soft clay. Journal of Geotechnical and Geoenvironmental Engineering, 2013, 139: 24-34

[2] Hammad MA, Mohamedzein YEA, Al-Aghbari MY, Al-Nuaimi AS. Laboratory investigation of deep soil mixing for the improvement of salt-cemented soils. Geotechnical and Geological Engineering, 2024, 42: 7753-7770

[3] Horpibulsk S, Rachan R, Suddeepong A, Chinkulkijniwat A. Strength development in cement admixed Bangkok clay: Laboratory and field investigations. Soils and Foundations, 2011, 51: 239-251

[4] Naik SR, Akula P, Hariharan N, Puppala AJ, Little DN, Castaneda J. Lime treatment of Lake Texcoco clays with some insights on the application of deep mixing columns. Transportation Research Record, 2023, 2677: 708-720

[5] Abdelmalek, B., Soon, K. P., & Gary, C. (2012). Strength properties of cement treated coode island silt by the soil mixing method. Geotechnical Engineering for Transportation Projects (pp. 1421–1428). https://doi.org/10.1061/40744(154)132

[6] Porbaha A. State of the art in deep mixing technology. Part I: Basic concepts and overview, Ground Improvement, 1998, 2: 81-92

[7] Singh MJ, Yao K, Hou Y, Liu S, Yao Z, Borana L. Deep cement mixing columns for infrastructure development: A review of research progress, challenges, and future research directions. Geomechanics and Geoengineering, 2025, 20: 911-936

[8] Okamura, T., & Terashi, M. (1975). Deep lime mixing method of stabilization for marine clays. 5th Asian Regional Conference on Soil Mech. and Found. Engineering (pp. 69–75). Indian Institute of Science, Bangalore, India.

[9] Bruce, C., Collin, J., Berg, R., Filz, G., Terashi, M., & Yang, D. (2013). Federal Highway Administration Design Manual: Deep Mixing for Embankment and Foundation Support. FHWA-HRT-13-046, 244. http://www.fhwa.dot.gov/publications/research/infrastructure/structures/bridge/13046/index.cfm

[10] Moseley MP, Kirsch K. Ground improvement. CRC Press, 2004

[11] Prakash KG, Krishnamoorthy A. Effectiveness of stone and deep mixing lime columns on stability of embankments constructed on soft consolidating soil. Geotechnical and Geological Engineering, 2023, 41: 533-552

[12] Ramezani B, Dehghan Khalili H, Moradi P, Pourbagheri A. Seismic resilience with deep soil mixing: Numerical and experimental insights into liquefaction mitigation. Geotechnical and Geological Engineering, 2025, 43: 71

[13] Jamsawang P, Nuansrithong N, Voottipruex P, Songpiriyakij S, Jongpradist P. Laboratory investigations on the swelling behavior of composite expansive clays stabilized with shallow and deep clay-cement mixing methods. Applied Clay Science, 2017, 148: 83-94

[14] Van Ngoc P, Turner B, Huang J, Kelly R. Long-term strength of soil-cement columns in coastal areas. Soils and Foundations, 2017, 57: 645-654

[15] Sargent P. The development of alkali-activated mixtures for soil stabilisation, 2015Woodhead Publishing Limited

[16] Zhang M, Guo H, El-Korchi T, Zhang G, Tao M. Experimental feasibility study of geopolymer as the next-generation soil stabilizer. Construction and Building Materials, 2013, 47: 1468-1478

[17] McLellan BC, Williams RP, Lay J, van Riessen A, Corder GD. Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement. Journal of Cleaner Production, 2011, 19: 1080-1090

[18] Güllü H, Canakci H, Al Zangana IF. Use of cement based grout with glass powder for deep mixing. Construction and Building Materials, 2017, 137: 12-20

[19] Sobhan K, Ramirez J, Reddy D. Cement stabilization of highly organic subgrade soils to control secondary compression settlement. Transportation Research Record, 2012, 2310: 103-112

[20] Ho TO, Chen WB, Yin JH, Wu PC, Tsang DCW. Stress-strain behaviour of cement-stabilized Hong Kong marine deposits. Construction and Building Materials, 2021, 274 ArticleID: 122103

[21] Khoshsirat V, Bayesteh H, Sharifi M. Effect of high salinity in grout on the performance of cement-stabilized marine clay. Construction and Building Materials, 2019, 217: 93-107

[22] Ting MZY, Xu B, Yang M, Yi Y. Inhibition mechanism of MgO on ettringite formation in GGBS binder with inherent, internal, and external sulphates. Cement and Concrete Research, 2025, 197 ArticleID: 107981

[23] Arulrajah A, Yaghoubi M, Disfani MM, Horpibulsuk S, Bo MW, Leong M. Evaluation of fly ash- and slag-based geopolymers for the improvement of a soft marine clay by deep soil mixing. Soils and Foundations, 2018, 58: 1358-1370

[24] Khadka SD, Jayawickrama PW, Senadheera S, Segvic B. Stabilization of highly expansive soils containing sulfate using metakaolin and fly ash based geopolymer modified with lime and gypsum. Transportation Geotechnics, 2020, 23 ArticleID: 100327

[25] Olivia M, Nikraz H. Properties of fly ash geopolymer concrete designed by Taguchi method. Materials & Design, 2012, 36: 191-198

[26] Shu B, Chen W, Yang T, Xie Z, Ren Y, Li Y, Zheng L, Zeng G, Li M, Barbieri DM. Study on laboratory and engineering application of multi source solid waste based soft soil solidification materials. Case Studies in Construction Materials, 2022, 17 ArticleID: e01465

[27] Sargent P, Hughes PN, Rouainia M. A new low carbon cementitious binder for stabilising weak ground conditions through deep soil mixing. Soils and Foundations, 2016, 56: 1021-1034

[28] Provis JL, Deventer JSJ. Alkali activated materials state-of-the-art report, RILEM TC 224-AAM, 2014Springer Dordrecht

[29] Gupta S, Kumar S. A state-of-the-art review of the deep soil mixing technique for ground improvement. Innovative Infrastructure Solutions, 2023

[30] Gupta S, Kumar S, Pradeep NM, Nishant M. Performance analysis of soil-geopolymer deep mix column in soft soil under static and cyclic loading. Soil Dynamics and Earthquake Engineering, 2025, 194 ArticleID: 109368

[31] Roshan MJ, A Rashid AS, Abdul Wahab N, Tamassoki S, Jusoh SN, Hezmi MA, Nik Daud NN, Mohd Apandi N, Azmi M. Improved methods to prevent railway embankment failure and subgrade degradation: A review. Transportation Geotechnics, 2022, 37 ArticleID: 100834

[32] Ye G, Shu H, Zhang Z, Kang S, Zhang S, Wang Q. Solidification and field assessment of soft soil stabilized by a waste-based binder using deep mixing method. Bulletin of Engineering Geology and the Environment, 2021, 80: 5061-5074

[33] Hanafi M, Bordoloi S, Rinta-Hiiro V, Oey T, Korkiala-Tanttu L. Feasibility of biochar for low-emission soft clay stabilization using CO2 curing. Transportation Geotechnics, 2024, 49 ArticleID: 101370

[34] Ignat R, Baker S, Holmén M, Larsson S. Triaxial extension and tension tests on lime-cement-improved clay. Soils and Foundations, 2019, 59: 1399-1416

[35] Yu H, Yi Y, Yao K, Romagnoli A, Tan WL, Chang ABP. Effect of water/cement ratio on properties of cement-stabilized Singapore soft marine clay for wet deep mixing application. International Journal of Geotechnical Engineering, 2021, 15: 1198-1205

[36] Mojtahedi SFF, Ahmadihosseini A, Sadeghi H. An artificial intelligence based data-driven method for forecasting unconfined compressive strength of cement stabilized soil by deep mixing technique. Geotechnical and Geological Engineering, 2023, 41: 491-514

[37] Kitazume M, Terashi M. The deep mixing method. CRC Press, 2013

[38] Janz M, Johansson SE. The function of different binding agents in deep stabilization, 2002Linköping

[39] Yao K, Pan Y, Jia L, Yi JT, Hu J, Wu C. Strength evaluation of marine clay stabilized by cementitious binder. Marine Georesources and Geotechnology, 2020, 38: 730-743

[40] Kim J, Seo SG, Yoon SJ, Cho DS. Application of cement-free media binder for the deep mixing method of CMD–SOIL. Marine Georesources and Geotechnology, 2023, 41: 682-694

[41] Jeong, G. H., Shin, M. S., Han, G. T., Lee, J. H., & Kim, J. H. (2008). Suggestion for determination of DCM design parameter based on the statistical method. KGS Spring National Conference (pp. 462–471). Seoul, South Korea

[42] Wang W, Zhang C, Li N, Tao F, Yao K. Characterisation of nano magnesia–cement-reinforced seashore soft soil by direct-shear test. Marine Georesources and Geotechnology, 2019, 37: 989-998

[43] Horpibulsuk S, Rachan R, Raksachon Y. Role of Fly Ash on Strength and Microstructure Development in Blended Cement Stabilized Silty Clay. Soils and Foundations, 2009, 49: 85-98

[44] Anagnostopoulos CA. Strength properties of an epoxy resin and cement-stabilized silty clay soil. Applied Clay Science, 2015, 114: 517-529

[45] Bunawan AR, Momeni E, Armaghani DJ, Mat Said KNB, Rashid ASA. Experimental and intelligent techniques to estimate bearing capacity of cohesive soft soils reinforced with soil-cement columns. Measurement, 2018, 124: 529-538

[46] Bobet A, Hwang J, Johnston CT, Santagata M. One-dimensional consolidation behavior of cement-treated organic soil. Canadian Geotechnical Journal, 2011, 48: 1100-1115

[47] Consoli NC, Tomasi LF, Marques SFV. Cement-enhancing mechanical behavior of tailings behind upstream tailings dam for safe decommissioning. Journal of Materials in Civil Engineering, 2023

[48] Dehghanbanadaki A, Ahmad K, Ali N. Experimental investigations on ultimate bearing capacity of peat stabilized by a group of soil–cement column: A comparative study. Acta Geotechnica, 2016, 11: 295-307

[49] Esmaeili M, Gharouni-Nik M, Khajehei H. Evaluation of deep soil mixing efficiency in stabilizing loose sandy soils using laboratory tests. Geotechnical Testing Journal, 2014

[50] Federico A, Vitone C, Murianni A. On the mechanical behaviour of dredged submarine clayey sediments stabilized with lime or cement. Canadian Geotechnical Journal, 2015, 52: 2030-2040

[51] Guimond-Barrett A, Nauleau E, Le Kouby A, Pantet A, Reiffsteck P, Martineau F. Free-free resonance testing of in situ deep mixed soils. Geotechnical Testing Journal, 2013, 36: 283-291

[52] Jamsawang P, Yoobanpot N, Thanasisathit N, Voottipruex P, Jongpradist P. Three-dimensional numerical analysis of a DCM column-supported highway embankment. Computers and Geotechnics, 2016, 72: 42-56

[53] Rashid ASA, Black JA, Mohamad H, Noor NM. Behavior of weak soils reinforced with end-bearing soil-cement columns formed by the deep mixing method. Marine Georesources & Geotechnology, 2015, 33: 473-486

[54] Yao K, Li N, Chen DH, Wang W. Generalized hyperbolic formula capturing curing period effect on strength and stiffness of cemented clay. Construction and Building Materials, 2019, 199: 63-71

[55] Yao K, Chen Q, Ho J, Xiao H, Lee FH. Strain-dependent shear stiffness of cement-treated marine clay. Journal of Materials in Civil Engineering, 2018, 30: 1-10

[56] Yao K, Xiao H, Chen DH, Liu Y. A direct assessment for the stiffness development of artificially cemented clay. Géotechnique, 2019, 69: 741-747

[57] Liu KW, Rowe RK. Numerical modelling of prefabricated vertical drains and surcharge on reinforced floating column-supported embankment behaviour. Geotextiles and Geomembranes, 2015, 43: 493-505

[58] Yu Y, Bathurst RJ, Damians IP. Modified unit cell approach for modelling geosynthetic-reinforced column-supported embankments. Geotextiles and Geomembranes, 2016, 44: 332-343

[59] Yu Y, Bathurst RJ. Modelling of geosynthetic-reinforced column-supported embankments using 2D full-width model and modified unit cell approach. Geotextiles and Geomembranes, 2017, 45: 103-120

[60] Ekmen AB, Algin HM, Özen M. Strength and stiffness optimisation of fly ash-admixed DCM columns constructed in clayey silty sand. Transportation Geotechnics, 2020, 24 ArticleID: 100364

[61] Forsman J, Löfman M, Ikävalko J, Korkiala-Tanttu L. Low-carbon binders in six test deep mixing cases – Variation of in-situ strength. Transportation Geotechnics, 2025

[62] ASTM. (2022). Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete (ASTM C618-22). ASTM International.

[63] Oliveira PJV, Correia AAS, Garcia MR. Effect of stress level and binder composition on secondary compression of an artificially stabilized soil. Journal of Geotechnical and Geoenvironmental Engineering, 2013, 139: 810-820

[64] Yenginar Y, Olgun M. Physical, mechanical, and microstructural characteristics of fly ash replaced cement deep mixing columns. Bulletin of Engineering Geology and the Environment, 2024, 83: 1-24

[65] Luukkonen T, Abdollahnejad Z, Yliniemi J, Kinnunen P, Illikainen M. One-part alkali-activated materials: A review. Cement and Concrete Research, 2018, 103: 21-34

[66] Kumar S, Kumar R, Mehrotra SP. Influence of granulated blast furnace slag on the reaction, structure and properties of fly ash based geopolymer. Journal of Materials Science, 2010, 45: 607-615

[67] Mohammadinia A, Disfani MM, Conomy D, Arulrajah A, Horpibulsuk S, Darmawan S. Utilization of alkali-activated fly ash for construction of deep mixed columns in loose sands. Journal of Materials in Civil Engineering, 2019, 31 ArticleID: 04019233

[68] Hou P, Wang K, Qian J, Kawashima S, Kong D, Shah SP. Effects of colloidal nanoSiO2 on fly ash hydration. Cement and Concrete Composites, 2012, 34: 1095-1103

[69] Mahedi M, Cetin B, White DJ. Cement, lime, and fly ashes in stabilizing expansive soils: Performance evaluation and comparison. Journal of Materials in Civil Engineering, 2020, 32 ArticleID: 4020177

[70] Yenginar Y, Mobark AAMM, Olgun M. Investigating the construction parameters of deep mixing columns in silty soils. International Advanced Researches and Engineering Journal, 2021, 5: 464-474

[71] Elzeadani M, Bompa DV, Elghazouli AY. One part alkali activated materials: A state-of-the-art review. Journal of Building Engineering, 2022, 57 ArticleID: 104871

[72] Fernández-Jiménez A, Palomo A. Composition and microstructure of alkali activated fly ash binder: Effect of the activator. Cement and Concrete Research, 2005, 35: 1984-1992

[73] Duxson P, Provis JL. Designing precursors for geopolymer cements. Journal of the American Ceramic Society, 2008, 91: 3864-3869

[74] Shu B, Zeng G, Zhu M, Qiu K, Ren Y. Carbon emission, durability and application of solid waste based solidification material solidification soil. Materials Today Sustainability, 2025, 31 ArticleID: 101135

[75] Dejenie BB, Raghuram ASS, Korkiala-Tanttu L, Forsman J, Gustavsson H. Carbon sequestration capacity of stabilized soft clays with recycled binders. Geotechnical Testing Journal, 2024, 47: 5-21

[76] Min Y, Wu J, Li B, Zhang J. Dynamic shear modulus and damping ratio of the one-part geopolymer stabilized soft clay. Journal of Materials in Civil Engineering, 2022, 34: 1-12

[77] Wang SD, Scrivener KL, Pratt PL. Factors affecting the strength of alkali-activated slag. Cement and Concrete Research, 1994, 24: 1033-1043

[78] Wild S, Khatib JM, Jones A. Relative strength, pozzolanic activity and cement hydration in superplasticised metakaolin concrete. Cement and Concrete Research, 1996, 26: 1537-1544

[79] Deng Y, Yue X, Liu S, Chen Y, Zhang D. Hydraulic conductivity of cement-stabilized marine clay with metakaolin and its correlation with pore size distribution. Engineering Geology, 2015, 193: 146-152

[80] Liu L, Zhou A, Deng Y, Cui Y, Yu Z, Yu C. Strength performance of cement/slag-based stabilized soft clays. Construction and Building Materials, 2019, 211: 909-918

[81] Sabir BB, Wild S, Bai J. Metakaolin and calcined clays as pozzolans for concrete: A review. Cement and Concrete Composites, 2001, 23: 441-454

[82] Canakci H, Güllü H, Alhashemy A. Performances of using geopolymers made with various stabilizers for deep mixing. Materials, 2019

[83] Caijun S. Steel Slag—Its Production, Processing, Characteristics, and Cementitious Properties. Journal of Materials in Civil Engineering, 2004, 16: 230-236

[84] Kaliyavaradhan SK, Kannamkottil Unnikrishnan A, Ambily PS. CO₂ sequestration through alkali-activated steel slag: A review. Journal of Sustainable Cement-Based Materials, 2025, 14: 1042-1058

[85] Qasrawi H, Shalabi F, Asi I. Use of low CaO unprocessed steel slag in concrete as fine aggregate. Construction and Building Materials, 2009, 23: 1118-1125

[86] Schwarz N, Cam H, Neithalath N. Influence of a fine glass powder on the durability characteristics of concrete and its comparison to fly ash. Cement and Concrete Composites, 2008, 30: 486-496

[87] Canakci H, Güllü H, Dwle MIK. Effect of glass powder added grout for deep mixing of marginal sand with clay. Arabian Journal for Science and Engineering, 2018, 43: 1583-1595

[88] Hov, S., Paniagua, P., Sætre, C., Rueslåtten, H., Størdal, I., Mengede, M., & Mevik, C (2022). Lime-cement stabilisation of Trondheim clays and its impact on carbon dioxide emissions. Soils and Foundations, 62, Article 101162. https://doi.org/10.1016/j.sandf.2022.101162

[89] Lopez RA, Zhang Y, Forsman J, Korkiala-Tanttu L. Stabilization of soft clay with sustainable binders for dry deep mixing design. Geotechnical Testing Journal, 2024, 47: 314-335

[90] Kakrasul, J. I., Parsons, R., & Jie, H. (2018). Performance of Lime Kiln Dust-Treated Subgrade Soils. International Foundations Congress & Equipment Expo 2018 (pp. 473–484). Orlando, Florida. https://doi.org/10.1061/9780784481592.047

[91] Arulrajah A, Mohammadinia A, D’Amico A, Horpibulsuk S. Effect of lime kiln dust as an alternative binder in the stabilization of construction and demolition materials. Construction and Building Materials, 2017, 152: 999-1007

[92] Bui DD, Hu J, Stroeven P. Particle size effect on the strength of rice husk ash blended gap-graded Portland cement concrete. Cement and Concrete Composites, 2005, 27: 357-366

[93] Mosaberpanah MA, Umar SA. Utilizing rice husk ash as supplement to cementitious materials on performance of ultra high performance concrete: – A review. Materials Today Sustainability, 2020, 7 ArticleID: 100030

[94] Zaman, Z., Pal, K., Yehye, W. A., Sagadevan, S., Shah, S. T., Adebisi, G. A., Marliana, E., Rafique, R. F., & Johan, R. B. (2017). Pyrolysis: A Sustainable Way to Generate Energy from Waste. Pyrolysis, 1. https://doi.org/10.5772/intechopen.69036

[95] Chen T, Zhao L, Gao X, Li L, Qin L. Modification of carbonation-cured cement mortar using biochar and its environmental evaluation. Cement and Concrete Composites, 2022, 134 ArticleID: 104764

[96] Liu Y, Liu S, Du G, Yang Y. Assessment of MgO and captured CO₂ in deep mixing applications: Electrical properties and environmental impacts. Case Studies in Construction Materials, 2025, 22 ArticleID: e04707

[97] Xian, X., Zhang, D., Lin, H., & Shao, Y. (2022). Ambient pressure carbonation curing of reinforced concrete for CO₂ utilization and corrosion resistance. Journal of CO₂Utilization, 56, Article 101861. https://doi.org/10.1016/j.jcou.2021.101861

[98] Winnefeld, F., German, A., Lura, P., Rentsch, D., & Lothenbach, B. (2023). Hydration of cementitious binders based on magnesium oxide/hydromagnesite blends. 16th International Congress on the Chemistry of Cement. Bangkok, Thailand.

[99] Estabragh AR, Beytolahpour I, Javadi A. Effect of resin on the strength of soil-cement mixture. Journal of Materials in Civil Engineering, 2011, 23: 969-976

[100] An Y, Zhang G. Testing and prediction of mechanical characteristics of sensitive marine clays stabilized by deep mixing method. Marine Georesources and Geotechnology, 2024, 43: 1182-1197

[101] Yenginar Y, Olgun M. Optimizing installation parameters of DM columns in clay using Taguchi method. Bulletin of Engineering Geology and the Environment, 2023, 82: 145

[102] Disfani MM, Mohammadinia A, Arulrajah A, Horpibulsuk S, Leong M. Lightly stabilized loose sands with alkali-activated fly ash in deep mixing applications. International Journal of Geomechanics, 2021, 21: 1-11

[103] Deng Z, Yang Z, Bian J, Lin J, Long Z, Hong G, Yang Z, Ye Y. Advantages and disadvantages of PVA-fibre-reinforced slag- and fly ash-blended geopolymer composites: Engineering properties and microstructure. Construction and Building Materials, 2022, 349 ArticleID: 128690

[104] Deng Z, Deng Z. Short-term improvement of ductile geopolymer composites exposed to magnesium sulfate: Mechanical properties, sorptivity, and mechanisms. Construction and Building Materials, 2023, 408 ArticleID: 133648

[105] Kazemian S, Prasad A, Huat BBK, Mohammad TA, Aziz FNAA. Stabilization of tropical peat by chemical grout. Journal of the Chinese Institute of Engineers, 2013, 36: 114-128

[106] Suksiripattanapong C, Sakdinakorn R, Tiyasangthong S, Wonglakorn N, Phetchuay C, Tabyang W. Properties of soft Bangkok clay stabilized with cement and fly ash geopolymer for deep mixing application. Case Studies in Construction Materials, 2022, 16 ArticleID: e01081

[107] Zhang X, Zhu H, Jiao Z, Cen Z. Lattice-shaped ground improvement by mixing soil and alkali-activated slag for liquefaction mitigation. Case Studies in Construction Materials, 2022, 17 ArticleID: e01445

[108] Kitazume M, Grisolia M, Leder E, Marzano IP, Correia AAS, Oliveira PJV, Åhnberg H, Andersson M. Applicability of molding procedures in laboratory mix tests for quality control and assurance of the deep mixing method. Soils and Foundations, 2015, 55: 761-777

[109] Finnish Transport Agency. (2018). Syv¨astabiloinnin suunnittelu (Deep stabilization design), Liikenneviraston Ohjeita. Finnish Transport Agency.

[110] Japanese Geotechnical Society. (2009). Practice for making and curing stabilized soil specimens without compaction. Japanese Geotechnical Society.

[111] British Standards Institution. (2005). Execution of special geotechnical works - Deep mixing (EN 14679). British Standards Institution.

[112] General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China. (2012). Technical code for ground treatment of buildings (JGJ79-2012). Standards Press of China.

[113] EuroSoilStab. (2002). Development of design and construction methods to stabilise soft organic soils: Design guide soft soil stabilisation (CT97- 0351, Project No. BE 96-3177). EuroSoilStab.

[114] Gao X, Yu QL, Brouwers HJH. Characterization of alkali activated slag–fly ash blends containing nano-silica. Construction and Building Materials, 2015, 98: 397-406

[115] Khale D, Chaudhary R. Mechanism of geopolymerization and factors influencing its development: A review. Journal of Materials Science, 2007, 42: 729-746

[116] Obonyo E, Kamseu E, Melo UC, Leonelli C. Advancing the use of secondary inputs in geopolymer binders for sustainable cementitious composites: A review. Sustainability, 2011, 3: 410-423

[117] Oderji SY, Chen B, Ahmad MR, Shah SFA. Fresh and hardened properties of one-part fly ash-based geopolymer binders cured at room temperature: Effect of slag and alkali activators. Journal of Cleaner Production, 2019, 225: 1-10

[118] Ababneh A, Matalkah F, Aqel R. Synthesis of kaolin-based alkali-activated cement: Carbon footprint, cost and energy assessment. Journal of Materials Research and Technology, 2020, 9: 8367-8378

[119] Almalkawi AT, Hamadna S, Soroushian P. One-part alkali activated cement based volcanic pumice. Construction and Building Materials, 2017, 152: 367-374

[120] Feng D, Provis JL, van Deventer JSJ. Thermal activation of albite for the synthesis of one-part mix geopolymers. Journal of the American Ceramic Society, 2012, 95: 565-572

[121] Masi G, Filipponi A, Bignozzi MC. Fly ash-based one-part alkali activated mortars cured at room temperature: Effect of precursor pre-treatments. Open Ceramics, 2021, 8 ArticleID: 100178

[122] Matalkah F, Salem T, Shaafaey M, Soroushian P. Drying shrinkage of alkali activated binders cured at room temperature. Construction and Building Materials, 2019, 201: 563-570

[123] Beskopylny, A. N., Hematibahar, M., Kharun, M., Stel, S. A., Shcherban, E. M., & Ananova, O. (2025). Predictive Modeling of CSH Formation in Cement Materials Based on SEM and EDS Analysis. Civil Engineering Journal,11, 2460–2486. https://doi.org/10.28991/CEJ-2025-011-06-017

[124] Puppala AJ, Intharasombat N, Vempati RK. Experimental studies on ettringite-induced heaving in soils. Journal of Geotechnical and Geoenvironmental Engineering, 2005, 131: 325-337

[125] Kazemian S. Effect of different binders on settlement of fibrous peat. Soil Mechanics and Foundation Engineering, 2015, 52: 9-14

[126] Srinivasamurthy L, Chevali VS, Zhang Z, Wang H. Effect of fly ash to slag ratio and Na₂O content on leaching behaviour of fly ash/slag based alkali activated materials. Construction and Building Materials, 2023, 383 ArticleID: 131234

[127] van der Sloot HA. Characterization of the leaching behaviour of concrete mortars and of cement–stabilized wastes with different waste loading for long term environmental assessment. Waste Management, 2002, 22: 181-186

[128] Fernández-Jiménez A, Palomo A. Characterisation of fly ashes. Potential reactivity as alkaline cements. Fuel, 2003, 82: 2259-2265

[129] Izquierdo M, Querol X, Davidovits J, Antenucci D, Nugteren H, Fernández-Pereira C. Coal fly ash-slag-based geopolymers: Microstructure and metal leaching. Journal of Hazardous Materials, 2009, 166: 561-566

[130] Bystrianska E, Koplik J. The influence of alkaline activator on immobilization of metals in alkali-activated blast furnace slag. IOP Conference Series: Materials Science and Engineering, 2021

[131] Cao L, Zuo Y, Liang S, Sun Y, Ke Y, Yang J, Wei X, Hu J, Hou H. Geopolymerization of MSWI fly ash and coal fly ash for efficient solidification of heavy metals: Insights into stabilization mechanisms and long-term leaching behavior. Construction and Building Materials, 2024, 411 ArticleID: 134359

[132] Wang Y, Cao Y, Ma Y, Xiao S, Hu J, Wang H. Fresh and hardened properties of alkali-activated fly ash/slag binders: Effect of fly ash source, surface area, and additives. Journal of Sustainable Cement-Based Materials, 2022, 11: 239-262

[133] Hematibahar M, Vatin N, Petrů J, Bashir MN, Hasanzadeh A, Gebre T, Milani AA, Bakhtiyari A. Experimental evaluation of mechanical strength of silica fume-cemented sand reinforced with 3D-printed fibers. Journal of Materials Research and Technology, 2025, 38: 2058-2075

[134] Csótár H, Szalai S, Kurhan D, Sysyn M. Evaluating 3D-printed polylactic acid (PLA) reinforced materials: Mechanical performance and chemical stability in concrete mediums. Applied Sciences, 2025, 15 ArticleID: 2165

[135] Rossi E, Roy R, Copuroglu O, Jonkers HM. Influence of self-healing induced by polylactic-acid and alkanoates-derivates precursors on transport properties and chloride penetration resistance of sound and cracked mortar specimens. Construction and Building Materials, 2022, 319 ArticleID: 126081

[136] Wu B, Diao H, Chen S, Shi S, Wang X. How does environment-specific hydrolysis alter the mechanical performance of polylactic acid (PLA) fiber?. Chemical Engineering Journal, 2026, 528 ArticleID: 172284

[137] Turner LK, Collins FG. Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete. Construction and Building Materials, 2013, 43: 125-130

Funding

Shenzhen Science and Technology Innovation Program(JCYJ20250604124219025)

Natural Science Foundation of Shandong Province(ZR2024LZN002)

Jinan Science and Technology Bureau(202333051)

Regional Collaborative Innovation Program of Changji Hui Autonomous Prefecture(2025X02)

RIGHTS & PERMISSIONS

The Author(s)