Gypsum-based Silica Gel Humidity-controlling Composite Materials: Preparation, Characterization, and Performance

Abstract

Gypsum was used as substrate, and silica gel was mixed into substrate at a certain mass ratio to prepare humidity-controlling composites; moreover, the moisture absorption and desorption properties of gypsum-based composites were compared with adding different silica gel particle size and proportion. The morphological characteristics, the isothermal equilibrium moisture content curve, moisture absorption and desorption rate, moisture absorption and desorption stability, and humidity-conditioning performance were tested and analyzed. The experimental results show that, compared with pure-gypsum, the surface structure of the gypsum-based composites is relatively loose, the quantity, density and aperture of the pores in the structure increase. The absorption and desorption capacity increase along with the increase of silica gel particle size and silica gel proportion. When 3 mm silica gel particle size is added with a mass ratio of 40%, the maximum equilibrium moisture content of humidity-controlling composites is 0.161 g/g at 98% relative humidity (RH), 3.22 times that of pure-gypsum. The moisture absorption and desorption rates are increased, the equilibrium moisture absorption and desorption rates are 2.68 times and 1.61 times that of pure-gypsum at 58.5% RH, respectively. The gypsum-based composites have a good stability, which has better timely response to dynamic humidity changes and can effectively regulate indoor humidity under natural conditions.

Keywords

humidity controlling / composite materials / gypsum / silica gel

References

[1] Rao ZH, Wang SF, Zhang ZG. Energy Saving Latent Heat Storage and Environmental Friendly Humidity-controlled Materials for Indoor Climate[J]. Renewable&Sustainalbe Energy Reviews, 2012, 16: 3 136-3 145.

[2] Atthajariyakul S, Leephakpreeda T. Real-time Determination of Optimal Indoor-air Condition for Thermal Comfort, Air Quality and Efficient Energy Usage[J]. Energy and Buildings, 2004, 36: 720-733.

[3] Zhu N, Ma ZJ, Wang SW. Dynamic Characteristics and Energy Performance of Buildings Using Phase Change Materials: A Review[J]. Energy Conversion and Management, 2009, 5012: 3 169-3 181.

[4] Nishito I, Miyano A. About the Changes in Indoor Humidity[J]. Transactions of the Architectural Institute of Japan, 1952, 44: 73-81.

[5] Ran MY. Review of Research and Application of Air Humidity Controlling Materials in Japan[J]. Materials Reports, 2002, 16: 42-44.

[6] Zheng X, Yuan LT. Recent Progress on Composite Humidity Control Materials[J]. Chemical Industry and Engineering Progress, 2020, 39: 1 378-1 388.

[7] Chen GY, Bai XY, Zhang XM, et al. Research on Characteristics of Biomass-based Humidity-Controlling Materials[J]. HV&AC, 2007, 37: 14-17.

[8] Jiang HY, Wang YP, Wu HL. Explorative Research of the Organic Humidity Controlling Materials[J]. Journal of Wuhan University of Technology, 2007, 29: 6-8.

[9] Zhang YW, Chen JB, Liang X, Wei XY, et al. Experimental Research on the Effect of Humidity Controlling Materials on Indoor Humidity Environment[J]. Journal of BEE, 2016, 2016, 44: 48-51+87.

[10] Shahrzad P, Fitsum T. Moisture Buffering Effect of Gypsum Board in a Marine Climate: A Field Experimental Study[J]. Advanced Materials Research, 2014, 1051: 763-773.

[11] Jiang HY, Luan CM. Preparation and Absorption/Desorption Performance of Gypsum-based Humidity Controlling Materials[J]. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2011, 26: 684-686.

[12] Shang JL, Zong ZF, Zhang H. Synthesis and Analysis of New Humidity-controlling Composite Materials[J]. International Journal of Minerals, Metallurgy and Materials, 2017, 24: 594-602.

[13] Lee JK, Kim TY. Evaluation of Humidity Control Ceramic Paint Using Gypsum Binder[J]. Journal of the Korean Ceramic Society, 2018, 55: 74-79.

[14] Shang JL, Chen D, Wu B. Preparation of the Biomass Porous Phase Change Materials and Its Thermal and Moisture Properties[J]. New Chemical Materials, 2015, 43: 107-109+113.

[15] Ge TS, Dai YJ, Wang RZ, et al. Experimental Comparison and Analysis on Silica Gel and Polymer Coated Fin-tube Heat Exchangers[J]. Energy, 2010, 35: 2 893-2 900.

[16] Mohammed RH, Mesalhy O, Elsayed ML, et al. Revisiting the Adsorption Equilibrium Equations of Silica-gel/Water for Adsorption Cooling Applications[J]. International Journal of Refrigeration, 2018, 86: 40-47.

[17] Fang YT, Jiang G, Kuang S, et al. Preparation and Absorptive Performance of Silica Gel/Molecular Sieve Composites[J]. Journal of the Chinese Ceramic Society, 2007, 35: 746-749.

[18] Zheng XH, Zhang XS, Dai YJ. Experimental Research on Passive Humidity Control Property of Composite Silica Gel[J]. Building Science, 2011, 37: 45-48.

[19] Zhang XJ, Sumathy K, Dai YJ, et al. Dynamic Hygroscopic Effect of The Composite Material Used in Desiccant Rotary Wheel[J]. Solar Energy, 2006, 80: 1 058-1 061.

[20] Jiang Y, Ge TS, Wang RZ, et al. Experimental Investigation and Analysis of Composite Silica-Gel Coated Fin-tube Heat Exchangers[J]. International Journal of Refrigeration, 2015, 51: 169-179.

[21] GB/T 20312-2006, Measurement of Hygrothermal Performance and Hygroscopic Properties of Building Materials and Products[S].

[22] Ran MY, Yuan JJ. Test Methods of Moisture Adsorption/Desorption Performance of Humidity Control Materials[J]. HV&AC, 2006, 36: 10-16.

[23] Zhang H. Study on Preparation, Thermal and Moisture Properties and Application of Phase Change Moisture Storage Materials for Buildings[D], 2016 Xi’an: Xi’an University of Architecture and Technology.

[24] Shang JL, Zhang H, Xiong L, et al. Experimental on Parameters of Temperature-humidity of Gypsum-based Composite Phase Change Material[J]. Journal of Functional Materials, 2016, 47: 5 068-5 073.

[25] Chi LJ, Wang ZH, Zhang T. Design of Material Attenuation Coefficient Measure Device[J]. Turbine Technology, 2001, 43: 63-64.