One-pot Synthesis of Hierarchical Flower-like WS2 Microspheres as Anode Materials for Lithium-ion Batteries

Xianghua Zhang , Hen Tan , Ze Wang , Maoquan Xue

Journal of Wuhan University of Technology Materials Science Edition ›› 2024, Vol. 39 ›› Issue (1) : 1 -6.

PDF
Journal of Wuhan University of Technology Materials Science Edition ›› 2024, Vol. 39 ›› Issue (1) : 1 -6. DOI: 10.1007/s11595-024-2847-0
Advanced Materials

One-pot Synthesis of Hierarchical Flower-like WS2 Microspheres as Anode Materials for Lithium-ion Batteries

Author information +
History +
PDF

Abstract

3D hierarchical flowerlike WS2 microspheres were synthesized through a facile one-pot hydrothermal route. The as-synthesized samples were characterized by powder X-ray powder diffraction (XRD), energy-dispersive spectroscopy (EDS), scanning electron microscopy (SEM) and Raman. SEM images of the samples reveal that the hierarchical flowerlike WS2 microspheres with diameters of about 3–5 µm are composed of a number of curled nanosheets. Electrochemical tests such as charge/discharge, cyclic voltammetry, cycle life and rate performance were carried out on the WS2 sample. As an anode material for lithium-ion batteries, hierarchical flowerlike WS2 microspheres show excellent electrochemical performance. At a current density of 100 mA·g−1, a high specific capacity of 647.8 mA·h·g−1 was achieved after 120 discharge/charge cycles. The excellent electrochemical performance of WS2 as an anode material for lithium-ion batteries can be attributed to its special 3D hierarchical structure.

Keywords

WS2 / microspheres / lithium-ion batteries / electrochemical performance

Cite this article

Download citation ▾
Xianghua Zhang, Hen Tan, Ze Wang, Maoquan Xue. One-pot Synthesis of Hierarchical Flower-like WS2 Microspheres as Anode Materials for Lithium-ion Batteries. Journal of Wuhan University of Technology Materials Science Edition, 2024, 39(1): 1-6 DOI:10.1007/s11595-024-2847-0

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Tan L, Wang M S, Liu Y J, et al. Synthesis of SnO2 Nanorods and Hollow Spheres and Their Electrochemical Properties as Anode Materials for Lithium Ion Batteries[J]. Mater. Technol., 2012, 27(2): 191-195.

[2]

Liu Y, Ren L, Qi X, et al. Hydrothermal Exfoliated Molybdenum Disulfide Nanosheets as Anode Material for Lithium Ion Batteries[J]. J. Energy Chem., 2014, 23: 207-212.

[3]

He C J, Wang Y Q, Meng W J, et al. Hierarchical Microspheres Constructed by SnS2 Nanosheets and S-doped Graphene for High Performance Lithium/Sodium-ion Batteries[J]. J. Alloy. Compd., 2021, 889: 161 648.

[4]

Yang W F, Wang J W, Si C H, et al. [001] Preferentially-oriented 2D Tungsten Disulfide Nanosheets as Anode Materials for Superior Lithium Storage[J]. J. Mater. Chem. A, 2015, 3: 17 811-17 819.

[5]

Tarascon J M, Armand M. Issues and Challenges Facing Rechargeable Lithium Batteries[J]. Nature, 2001, 414: 359-367.

[6]

Liu M C, Zhang H, Hu Y X, et al. Special Layer-structured WS2 Nanoflakes as High Performance Sodium Ion Storage Materials[J]. Sustain. Energ. Fuels, 2019, 3: 1 239.

[7]

Armand M, Tarascon J M. Building Better Batteries: Researchers Must Find a Sustainable Way of Providing the Power Our Modern Lifestyles Demand [J]. Nature, 2008, 451(7179): 652-657.

[8]

Goodenough JB, Park KS. The Li-Ion Rechargeable Battery: A Perspective [J]. J. Am. Chem. Soc., 2013, 135(4): 1 167-1 176.

[9]

Zhang Q, Xu D, Zhou X, et al. In Situ Synthesis of CuO and Cu Nanostructures with Promising Electrochemical and Wettability Properties[J]. Small, 2014, 10(5): 935-943.

[10]

Aric A S, Bruce P, Scrosati B, et al. Nanostructured Materials for Advanced Energy Conversion and Storage Devices[J]. Nature Mater., 2005, 4(5): 366-377.

[11]

Xie Y, Naguib M, Mochalin V N, et al. Role of Surface Structure on Li-ion Energy Storage Capacity of Two-Dimensional Transition-metal Carbides[J]. J. Am. Chem. Soc., 2014, 136(17): 6 385-6 394.

[12]

Chang K, Chen W. Single-Layer MoS2/Graphene Dispersed in Amorphous Carbon: Towards High Electrochemical Performances in Rechargeable Lithium Ion Batteries[J]. J. Mater. Chem., 2011, 21(43): 17 175-17 184.

[13]

Wang X, Huang J, Li J, et al. Improved Na Storage Performance with the Involvement of Nitrogen Doped Conductive Carbon into WS2 Nanosheets[J]. ACS Appl. Mater. Interfaces, 2016, 8(36): 23 899-23 906.

[14]

Wang H, Wang P, Ji Z, et al. Rechargeable Quasi-solid-state Aqueous Hybrid Al3+/H+ Battery with 10 000 Ultralong Cycle Stability and Smart Switching Capability[J]. Nano Res., 2021, 14: 4 154-4 162.

[15]

Huang X, Zeng Z, Zhang H. Metal Dichalcogenide Nanosheets: Preparation, Properties and Applications[J]. Chem. Soc. Rev., 2013, 42(5): 1 934-1 946.

[16]

Liu Y, Ren L, Qi X, et al. Hydrothermal Exfoliated Molybdenum Disulfide Nanosheets as Anode Material for Lithium Ion Batteries[J]. J. Energy Chem., 2014, 23(2): 207-212.

[17]

Zhang X H, Xu H X, Wang J, et al. Synthesis of Ultrathin WS2 Nanosheets and Their Tribological Properties as Lubricant Additives[J]. Nanoscale Res. Lett., 2016, 11: 442.

[18]

Ansari M Z, Ansari S A, Parveen N, et al. Lithium Ion Storage Ability, Supercapacitor Electrode Performance, and Photocatalytic Performance of Tungsten Disulfide Nanosheets[J]. New J. Chem., 2018, 42: 5 859-5 867.

[19]

Greenberg R, Halperin G, Etsion I, et al. The Effect of WS2 Nanoparticles on Friction Reduction in Various Lubrication Regimes[J]. Tribol. Lett., 2004, 17(2): 179-186.

[20]

Lu M Y, Lu M P, Chung YA, et al. Intercrossed Sheet-like Ga-doped ZnS Nanostructures with Superb Photocatalytic Actvitiy and Photoresponse[J]. J. Phys. Chem. C, 2009, 113(29): 12 878-12 882.

[21]

Cao S, Zhao C, Peng L. The 3D WS2 Microspheres: Preparation, Characterization and Optical Absorption Properties[J]. Mater. Lett., 2016, 164: 452-455.

[22]

Bai J, Zhao B C, Zhou J F, et al. Glucose-Induced Synthesis of 1T-MoS2/C Hybrid for High-rate Lithium-ion Batteries.[J]. Small, 2019, 15: 1 805 420.

[23]

Song Y C, Liao J X, Chen C, et al. Controllable Morphologies and Electrochemical Performances of Self-assembled Nano-honeycomb WS2 Anodes Modified by Graphene Doping for Lithium and Sodium Ion Batteries[J]. Carbon, 2019, 142: 697-706.

[24]

Lei W, Xiao J L, Liu H P, et al. Tungsten Disulfide: Synthesis and Applications in Electrochemical Energy Storage and Conversion[J]. Tungsten, 2020, 2(3): 217-239.

[25]

Liu H, Su D, Wang G, et al. An Ordered Mesoporous WS2 Anode Material with Superior Electrochemical Performance for Lithium Ion Batteries[J]. J. Mater. Chem., 2012, 22(34): 17 437-17 440.

[26]

Yeh YY, Chiang WH, Liu WR. Synthesis of Few-layer WS2 by Jet Cavitation as Anode Material for Lithium Ion Batteries[J]. J. Alloy. Compd., 2019, 775: 1 251-1 258.

[27]

Srinivaas M, Wu C Y, Duh J G, et al. Highly Rich 1T Metallic Phase of Few-layered WS2 Nanoflowers for Enhanced Storage of Lithium-ion Batteries[J]. ACS Sustainable Chem. Eng., 2019, 7: 10 363-10 370.

[28]

Feng H, Zheng W. Synthesis of MoS2 Hierarchical Nanostructure and Its Performance for Lithium-ion Battery[J]. Chem. J. Chinese U., 2017, 38(7): 1 134-1 140.

[29]

Du H, Wang Y, Yuan H, et al. Facile Synthesis and High Capacitive Performance of 3D Hierarchical Ni(OH)2 Microspheres[J]. Electrochim. Acta, 2016, 196: 84-91.

[30]

Lee J H, Im J, Lee J R, et al. Hierarchical Nanostructured MnF2 Fabricated using Rapid Microwave Synthesis as Abnormal High-Capacity of Anode Materials for Li-ion Batteries[J]. J. Phys. Chem. Solids, 2022, 161: 110 477.

[31]

Zeng X H, Ding Z P, Ma C, et al. Hierarchical Nanocomposite of Hollow N-doped Carbon Spheres Decorated with Ultrathin WS2 Nanosheets for High-performance Lithium-ion Battery Anode[J]. ACS Appl. Mater. Interfaces, 2016, 8: 18 841-18 848.

[32]

Feng C Q, Huang L F, Guo Z P, et al. Synthesis of Tungsten Disulfide (WS2) Nanoflakes for Lithium Ion Battery Application[J]. Electrochem. Commun., 2007, 9(1): 119-122.

[33]

Pang Q, Gao Y, Zhao Y, et al. Improved Lithium-ion and Sodium-ion Storage Properties from Few-layered WS2 Nanosheets Embedded in a Mesoporous CMK-3 Matrix[J]. Chem. Eur. J., 2017, 23: 7 074-7 080.

[34]

Li T T, Guo R, Luo Y, et al. Innovative N-doped Graphene-coated WS2 Nanosheets on Graphene Hollow Spheres Anode with Double-sided Protective Structure for Li-ion Storage [J]. Electrochim. Acta, 2018, 290(10): 128-141.

[35]

Ren J, Ren R P, Lv Y K. WS2-Decorated Graphene Foam@CNTs Hybrid Anode for Enhanced Lithium-ion Storage[J]. J. Alloy. Compd., 2019, 784: 697-703.

[36]

Wu J, You N, Li X, et al. SiO2@MoS2 Core–Shell Nanocomposite Layers with High Lithium Ion Diffusion as a Triple Polysulfide Shield for High Performance Lithium–Sulfur Batteries[J]. J. Mater. Chem. A, 2019, 7: 7 644-7 653.

[37]

Wu Q, Jiao L, Du J, et al. One-Pot Synthesis of Three-Dimensional SnS2 Hierarchitectures as Anode Material for Lithium-ion Batteries[J]. J. Power Sources, 2013, 239: 89-93.

[38]

Yuan Y F, Zhao W C, Chen L, et al. CoO Hierarchical Mesoporous Nanospheres@TiO2@C for High-Performance Lithium-ion Storage[J]. Appl. Surf. Sci., 2021, 556: 149 810.

[39]

Zhou L, Yan S, Pan L, et al. A Scalable Sulfuration of WS2 to Improve Cyclability and Capability of Lithium-ion Batteries[J]. Nano Res., 2016, 9: 857-865.

AI Summary AI Mindmap
PDF

104

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/