Alkali Tolerance of Concrete Internal Curing Agent Based on Sodium Carboxymethyl Starch

Abstract

Internal curing agents (ICA) based on super absorbent polymer have poor alkali tolerance and reduce the early strength of concrete. An alkali tolerate internal curing agent (CAA-ICA) was designed and prepared by using sodium carboxymethyl starch (CMS) with high hydrophilicity, acrylic acid (AA) containing anionic carboxylic group and acrylamide (AM) containing non-ionic amide group as the main raw materials. The results show that the ratio of CAA-ICA alkali absorption solution is higher than that existing ICA, which solves the low water absorption ratio of the ICA in alkali environment. The water absorption ratio of CAA-ICA in saturated Ca(OH)₂ solution is 95.8 g·g⁻¹, and the alkali tolerance coefficient is 3.4. The application of CAA-ICA in cement-based materials can increase the internal relative humidity and miniaturize the pore structure. The compressive strength of mortar increases up to 12.95% at 28 d, which provids a solution to overcome the reduction of the early strength.

Keywords

alkali tolerance / sodium carboxymethyl starch / internal curing agent / compressive strength

References

[1] Marianne TH, Ole MJ, Konstantin K, et al. Can Superabsorbent Polymers Mitigate Autogenous Shrinkage of Internally Cured Concrete without Compromising the Strength?[J]. Constr. Build. Mater, 2012, 31: 226-230.

[2] Yang L, Shi CJ, Liu JH, et al. Factors Affecting the Effectiveness of Internal Curing: A Review[J]. Constr. Build. Mater, 2021, 267: 121 017.

[3] Yang L, Shi CJ, Wu ZM. Mitigation Techniques for Autogenous Shrinkage of Ultra-high-performance Concrete-A Review[J]. Compos. Pt. B-Eng., 2019, 178: 107 456.

[4] Qin X, Shen AQ, Lyu ZH, et al. Research on Water Transport Behaviors and Hydration Characteristics of Internal Curing Pavement Concrete[J]. Constr. Build. Mater, 2020, 248: 118 714.

[5] Marianne TH, Ole MJ. Chloride Migration in Concrete with Superabsorbent Polymers[J]. Cem. Concr. Compos., 2015, 55: 290-297.

[6] Wyrzykowski M, Igarashi SI, Lura P, et al. Recommendation of RILEM TC 260-RSC: Using Superabsorbent Polymers (SAP) to Mitigate Autogenous Shrinkage[J]. Mater. Struct., 2018, 51(5): 135

[7] Ma XF, Wen GH. Development History and Synthesis of Super-absorbent Polymers: A Review[J]. J. Polym. Res., 2020, 27(6): 136

[8] Farzanian K, Ghahremaninezhad A. Desorption of Superabsorbent Hydrogels with Varied Chemical Compositions in Cementitious Materials[J]. Mater. Struct., 2018, 51(1): 3

[9] Li YC, Wang R, Huang AY. Effect of Binary Copolymer Super Absorbent Resin on Properties of Concrete[J]. Jiangsu Construction, 2015, (5): 101–103, 106

[10] Li H. Research and Application of Concrete Super Absorbent Resin (SAP) Internal Curing Agent Suitable for Northwest Arid Area[D], 2020 Lanzhou: Lanzhou Jiaotong University.

[11] Farzanian K, Pimenta TK, Perdigao RI, et al. The Mechanical Strength, Degree of Hydration, and Electrical Resistivity of Cement Pastes Modified with Superabsorbent Polymers[J]. Constr. Build. Mater., 2016, 109: 156-165.

[12] Hong G, Choi S. Rapid Self-Sealing of Cracks in Cementitious Materials Incorporating Superabsorbent Polymers[J]. Constr. Build. Mater., 2017, 143: 1-9.

[13] Beushausen H, Gillmer M, Alexander M. The Influence of Superabsorbent Polymers on Strength and Durability Properties of Blended Cement Mortars[J]. Cem. Concr. Compos., 2014, 52: 73-80.

[14] Yao Y, Zhu Y, Yang YZ. Incorporation Superabsorbent Polymer (SAP) Particles as Controlling Pre-Existing Flaws to Improve the Performance of Engineered Cementitious Composites (ECC)[J]. Constr. Build. Mater, 2012, 28(1): 139-145.

[15] Wang HJ, Liu RG, Cui ZW, et al. Study on Mechanical Properties of SAP Internal Curing Cement-based Materials Modified by Nano Silica[J]. Silicate Bulletin, 2020, 39(1): 41-49.

[16] Hassan B, Muhammad U, Syed A R, et al. Properties Enhancement of Super Absorbent Polymer (SAP) Incorporated Self-Compacting Cement Pastes Modified by Nano Silica (NS) Addition[J]. Constr. Build. Mater, 2019, 203: 18-26.

[17] Lefever G, Aggelis DG, De B, et al. The Influence of Superabsorbent Polymers and Nanosilica on the Hydration Process and Microstructure of Cementitious Mixtures[J]. Materials, 2020, 13(22): 1-16.

[18] Zhang M, Aba M, Sakoi Y, et al. Synergetic Effect of Expansive Agent (KEA) and Superabsorbent Polymers (SAP) on the Shrinkage, Strength and Pore Structures of Mortars[J]. Journal of Advanced Concrete Technology, 2021, 19(1): 26-39.

[19] Wu XL, Chen H, Cheng ZQ. Preparation of Carboxymethyl Starch Sodium Copolymer Super Absorbent Resin[J]. Journal of Jilin Agricultural University, 2020, 42(2): 219-228.

[20] Shi SM, Li KW, Pan SY, et al. Preparation and Properties of P(CMS-Na-NaAlg-AA) Super Absorbent Resin[J]. Journal of Yanshan University, 2018, 42(4): 350-355.

[21] Wu RQMG, Zheng YX, Fu Y. Comparison of Liquid Absorption Properties of Carboxymethyl Super Absorbent Resin in Salt Solution[J]. Guangzhou Chemical Industry, 2016, 44(14): 67-68.

[22] Piotr W, Maciej K. The Influence of Dosing Method and Material Characteristics of Superabsorbent Polymers (SAP) on the Effectiveness of the Concrete Internal Curing[J]. Materials, 2018, 11(9): 1 600

[23] Flory PJ. Thermodynamics of High Polymer Solutions[J]. J. Chem. Phys., 1941, 9(8): 660