A Fundamental DFT Study of Anatase (TiO₂) Doped with 3d Transition Metals for High Photocatalytic Activities

Abstract

Anatase (TiO₂) has been widely used in photocatalysis. However, it can only absorb near-ultraviolet light with a wavelength below approximately 388 nm due to a wide band gap. Therefore a modification should be made for anatase to increase its capability in utilizing more abundant visible light. We investigated the doped anatase with the most promising 3d transition metal elements, and the results showed that the visible light absorption intensity was increased significantly due to the reduced band gap and the cavitation effects. As compared to other 3d transition metals, Cu was found to be the most effective one in improving anatase photocatalytic effects. In addition, greater Cu concentration doped in the anatase increased the photocatalysis effects but reduced the anatase stability, therefore, an optimized Cu concentration should be considered to optimize the anatase photocatalysis activity.

Keywords

anatase / doping / transition metal elements / DFT

References

[1] Fujishima A, Zhang XT, Tryk DA. TiO₂ Photocatalysis and Related Surface Phenomena[J]. Surface Science Reports, 2008, 63(12): 515-582.

[2] Han F K V, Srinivasan M, et al. Tailored Titanium Dioxide Photocatalysts for the Degradation of Organic Dyes in Wastewater Treatment: A Review[J]. Applied Catalysis A: General, 2009, 359(1-2): 25-40.

[3] Varghese OK, Grimes CA. Metal Oxide Nanoarchitectures for Environmental Sensing[J]. Journal of Nanoscience and Nanotechnology, 2003, 3(4): 277-293.

[4] Landmann M, Rauls E, Schmidt WG. The Electronic Structure and Optical Response of Rutile, Anatase and Brookite TiO₂[J]. J. Phys Condens Matter, 2012, 24(19): 195 503

[5] Carp O, Huisman CL, Reller A. Photoinduced Reactivity of Titanium Dioxide[J]. Progress in Solid State Chemistry, 2004, 32(1-2): 33-177.

[6] Wang H, You C. Photocatalytic Removal of Low Concentration SO₂ by Titanium Dioxide[J]. Chemical Engineering Journal, 2016, 292: 199-206.

[7] Setvín M, Aschauer U, Scheiber P, et al. Reaction of O2 with Subsurface Oxygen Vacancies on TiO2 Anatase (101)[J]. Science, 341(6149): 988-991

[8] Scaranto J, Giorgianni S. A Quantum-mechanical Study of COAdsorbed on TiO₂: A Comparison of the Lewis Acidity of the Rutile (110) and the Anatase (101) Surfaces[J]. Journal of Molecular Structure: THEOCHEM, 2008, 858(1-3): 72-76.

[9] Yu J, Low J, Xiao W, et al. Enhanced Photocatalytic CO₂-Reduction Activity of Anatase TiO₂ by Coexposed {001} and {101} Facets[J]. Journal of the American Chemical Society, 2014, 136(25): 8 839-8 842.

[10] Wanbayor R, Ruangpornvisuti V. Adsorption of CO, H₂, N₂O, NH₃ and CH₄ on the anatase TiO₂ (001) and (101) Surfaces and Their Competitive Adsorption Predicted by Periodic DFT Calculations[J]. Materials Chemistry and Physics, 2010, 124(1): 720-725.

[11] Yoong LS, Chong FK, Dutta BK. Development of Copper-doped TiO₂ Photocatalyst for Hydrogen Production under Visible Light[J]. Energy, 2009, 34(10): 1 652-1 661.

[12] Park HS, Kim DH, Kim SJ, et al. The Photocatalytic Activity of 2.5wt% Cu-doped TiO₂ Nano Powders Synthesized by Mechanical Alloying[J]. Journal of Alloys and Compounds, 2006, 415(1-2): 51-55.

[13] Zhu JF, Deng ZG, Chen F, et al. Hydrothermal doping method for preparation of Cr₃₊-TiO₂ photocatalysts with concentration gradient distribution of Cr₃₊[J]. Applied Catalysis B: Environmental, 2006, 62(3-4): 329-335.

[14] Zhou B, Schulz M, Lin HY, et al. Photoeletrochemical Generation of Hydrogen Over Carbon-doped TiO₂ Photoanode[J]. Applied Catalysis B: Environmental, 2009, 92(1-2): 41-49.

[15] Konishi Y, Tokushige M, Asai S, et al. Copper Recovery from Chalcopyrite Concentrate by Acidophilic Thermophile Acidianus Brierleyi in Batch and Continuous-flow Stirred Tank Reactors[J]. Hydrometallurgy, 2001, 59(2-3): 271-282.

[16] Tada H, Mitsui T, Kiyonaga T, et al. All-solid-state Z-scheme in CdSAu-TiO₂ Three-component Nanojunction System[J]. Nat Mater, 2006, 5(10): 782-786.

[17] Hossain FM, Murch GE, Sheppard L, et al. Ab Initio Electronic Structure Calculation of Oxygen Vacancies in Rutile Titanium Dioxide[J]. Solid State Ionics, 2007, 178(5-6): 319-325.

[18] Choi WY, Termin A, Hoffmann MR. The Role of Metal Ion Dopants in Quantum-Sized TiO₂: Correlation between Photoreactivity and Charge Carrier Recombination Dynamics[J]. The Journal of Physical Chemistry, 1994, 98(51): 13 669-13 679.

[19] Chang JT, Lai YF, He JL. Photocatalytic Performance of Chromium or Nitrogen Doped Arc Ion Plated-TiO₂ Films[J]. Surface and Coatings Technology, 2005, 200(5-6): 1 640-1 644.

[20] Colón G, Maicu M, Hidalgo MC, et al. Cu-doped TiO₂ Systems with Improved Photocatalytic Activity[J]. Applied Catalysis B: Environmental, 2006, 67(1-2): 41-51.

[21] Cong Y, Zhang JL, Chen F, et al. Preparation, Photocatalytic Activity, and Mechanism of Nano-TiO₂ Co-Doped with Nitrogen and Iron (III) [J]. Journal of Physical Chemistry C, 2007, 111(28): 10 618-10 623.

[22] Yadav HM, Otari SV, Koli VB, et al. Preparation and Characterization of Copper-doped Anatase TiO₂ Nanoparticles with Visible Light Photocatalytic Antibacterial Activity[J]. Journal of Photochemistry and Photobiology A: Chemistry, 2014, 280: 32-38.

[23] Perdew JP, Wang Y. Accurate and Simple Analytic Representation of the Electron-Gas Correlation Energy[J]. Physical Review B Condensed Matter, 1992, 45(23): 13 244-13 249.

[24] Laasonen K, Pasquarello A, Car R, et al. Car-Parrinello Molecular Dynamics with Vanderbilt Ultrasoft Pseudopotentials[J]. Physical Review B Condensed Matter, 1993, 47(16): 10 142-10 153.

[25] Methfessel M, Paxton AT. High-precision Sampling for Brillouin-zone Integration in Metals[J]. Physical Review B, 1989, 40(6): 3 616-3 621.

[26] Howard CJ, Sabine TM, Dickson F. Structural and Thermal Parameters for Rutile and Anatase[J]. Acta Crystallographica, 1991, B47: 462-468.

[27] Arya A, Carter EA. Structure, Bonding, and Adhesion at the TiC(100)/ Fe(110) Interface from First Principles[J]. Journal of Chemical Physics., 2003, 118(19): 8 982-8 996.

[28] Lazzeri M, Vittadini A, Selloni A. Structure and Energetics of Stoichiometric TiO₂ Anatase Surfaces[J]. Physical Review B, 2001, 63(15): 155409

[29] Guo M, Du JL. First-principles Study of Electronic Structures and Optical Properties of Cu, Ag, and Au-doped Anatase TiO₂[J]. Physica B: Condensed Matter, 2012, 407(6): 1 003-1 007.

[30] Tian FH, Liu CB. DFT Description on Electronic Structure and Optical Absorption Properties of Anionic[J]. Journal of Physical Chemistry B, 2006, 110: 17.

[31] Zhang XD, Guo ML, Li WX. First-principles Study of Electronic and Optical Properties in Wurtzite Zn_1-xCd _xO[J]. Journal of Applied Physics, 2008, 103(6): 063 721