Simulation of the cracking and ablation behavior of ferro-siliceous and siliceous nuclear sacrificial concretes

Abstract

We investigated the simulation of the cracking and ablation behavior of ferro-siliceous and siliceous nuclear sacrificial concretes. To this end, four type of sacrificial concretes were fabricated, i e, the ferro-siliceous (F) and siliceous (S) plain concretes, and the polypropylene fiber reinforced concretes of the above two (FF, SF). The cracking and ablation behaviors of the sacrificial concretes were investigated by simulation tests, and the simulated elevated temperature was obtained by means of thermite powder. The number and the width of the cracks were compared and the pore size distribution of sacrificial concretes was measured. In addition, the interface and chemical composition of melt at different positions were analyzed, and the ablation depth of the sacrificial concrete crucibles was also measured. It was found that the siliceous concrete shows to be more prone to cracking than the ferro-siliceous concrete due to the higher content of fly ash and lower water to binder ratio; though the ablation depth of siliceous concrete is found to be slightly larger, no clear difference can be detected for the basemat ablation rate.

Keywords

sacrificial concrete / cracking / ablation / MCCI / high temperature

References

[1] Sevon T, Kinnunen T, Virta J, et al. HECLA Experiments on Interaction Between Metallic Melt and Hematite-containing Concrete[J]. Nucl. Eng. Des., 2010, 240: 3586-3593.

[2] Journeau C, Piluso P, Haquet JF, et al. Two-dimensional Interaction of Oxidic Corium with Concretes: The VULCANO Test Series[J]. Ann. Nucl. Energy, 2009, 36: 1597-1613.

[3] Fischer M. The Severe Accident Mitigation Concept and the Design Measures for Core Melt Retention of the European Pressurized Reactor (EPR)[J]. Nucl. Eng. Des., 2004, 230: 169-170.

[4] Eppinger B, Fellmoser F, Fieg G, et al. Experiments on Concrete Erosion by a Corium Melt in the EPR Reactor Cavity: KAPOOL 6-8[J]. Wissensch aftliche Berichte FZKA, 2000, 6453: 10-24.

[5] Sevon T, Journeau C, Ferry L. VULCANO VB-U7 Experiment on Interaction between Oxidic Corium and Hematite-containing Concrete [J]. Ann. Nucl. Energy, 2013, 59: 224-229.

[6] Foit J, Ficher M, Journeau C, et al. Experiments on MCCI with Oxide and Steel[J]. Ann. Nucl. Energy, 2014, 74: 100-109.

[7] Cranga M, Spengler C, Atkhen K, et al. Towards an European Consensus on Possible Causes of MCCI Ablation Anisotropy in an Oxidic Pool[J]. Ann. Nucl. Energy, 2014, 74: 72-88.

[8] Spengler C, Foit J. Transposition of 2D Molten Corium-Concrete Interactions (MCCI) from Experiment to Reactor[J]. Ann. Nucl. Energy, 2014, 74: 89-99.

[9] Konings RJM, Allen TR, Stoller RE, et al. Comprehensive Nuclear Materials[M], 2012 Amsterdam: Elsevier.

[10] Sevon T, Journeau C, Ferry L. VULCANO VB-U7 Experiment on Interaction between Oxidic Corium and Hematite-containing Concrete[J]. Ann. Nucl. Energy, 2013, 9: 224-229.

[11] Miassoedov A, Alsmeyer H, Cron T, et al. The COMET-L3 Experiment on Long-term Melt-Concrete Interaction and Cooling by Surface Flooding[J]. Nucl. Eng. Des., 2010, 240: 258-265.

[12] Sevon T, Kinnunen T, Virta J, et al. HECLA Experiments on Interaction between Metallic Melt and Hematite-containing Concrete[J]. Nucl. Eng. Des., 2010, 240: 3586-3593.

[13] Journeau C, Bonnet JM, Boccaccio E, et al. European Experiments on 2-D Molten Core Concrete Interaction: HECLA and VULCANO[J]. Nucl. Tech., 2010, 170: 189-200.

[14] Chu H, Jiang J, Sun W, et al. Thermal Behavior of Siliceous and Ferro-Siliceous Sacrificial Concrete Subjected to Elevated Temperatures[J]. Mater. Des., 2016, 95: 470-480.

[15] Mindeguia JC, Pimienta P, Noumewe A, et al. Temperature, Pore Pressure and Mass Variation of Concrete Subjected to High Temperature-Experimental and Numerical Discussion on Spalling Risk[J]. Cem. Concr. Res., 2010, 40: 477-487.

[16] Kalifa P, Menneteau FD, Quenard D. Spalling and Pore Pressure in HPC at High Temperatures[J]. Cem. Concr. Res., 2000, 30: 1915-1927.

[17] Ozawa M, Morimoto H. Effects of Various Fibers on High-temperature Spalling in High-performance Concrete[J]. Constr. Build. Mater., 2014, 71: 83-92.

[18] Zhang Z, Provis JL, Reid A, et al. Mechanical, Thermal Insulation, Thermal Resistance and Acoustic Absorption Properties of Geopolymer Foam Concrete[J]. Cem. Concr. Compos., 2015, 62: 97-105.